slvrstreak

iTrader: (3)

going pressure over temp?

9krpmrx8

iTrader: (46)

Cool, oil temp is good but fuel pressure is more important and essential for forced induction I think. You should do AFR, fuel pressure, EGT, and oil temp. Then get the good box to monitor Boost and everything else (water temp, command afr, MAF G/S, MAF voltage, STFT, LTFT, etc., etc.)

slvrstreak

iTrader: (3)

I have fuel PSI, oil PSI, AFR, boost, oil temp, coolant temp
now I just need a way to measure the temp before the resevoir

shadycrew31

iTrader: (6)

Yea eventually as time goes on I will get all of those.

My main concern is water temp afr and boost for right now.

slvrstreak

iTrader: (3)

yea oil temp follows the water temp
dont get caught up on the AFR though...hard to base anything on it most of the time

Brettus

iTrader: (2)

Updates ?

shadycrew31

iTrader: (6)

I'm getting a raise at the end of Feb but right now all my money is going towards moving expenses. Need to put a deposit on a new place etc etc.

Compressor housing is next on the list, then the BC. After that its just a bunch of small stuff before tuning.

hoss -05

iTrader: (4)

How are you planing on dealing with your tuning?

shadycrew31

iTrader: (6)

Custom tune!! By me!!

30 psi... afr at 16:1 at WOT right?


Kidding... I signed up for the baseline tune off PP02. well I did the early signup thing. I doubt my car will be ready by the time they go live.

hoss -05

iTrader: (4)

you are telling me.... but at least I should be home soon to start the work. My engine deal went down so I am having one built now and its going to be a Long process.

shadycrew31

iTrader: (6)

Ahhh that sucks! Well you know Scott and I are down to help out when it comes time to installing everything so at least you got that going for ya!

Brettus

iTrader: (2)

You realise that is a tuning tool but not an actual tune don't you ?

Let me know if you want help with the actual tune .

Chris

iTrader: (10)

he can still work with PPO2 to get a base tune

Brett is a good guy though so he can help as well

shadycrew31

iTrader: (6)

Yea I figure it would give me enough info etc so I could make suggested adjustments and work out a tune.

Of course I'd always appreciate some help!

Brettus

iTrader: (2)

Not having used it recently I can't say for sure how much it does to help , but I'd imagine you have to get most of the tune sorted before you can even start using it .

shadycrew31

iTrader: (6)

I thought the whole point was to get you the base tune sorted and you would self tune form there.

9krpmrx8

iTrader: (46)

The base tune (open source) will get you running (for the most part unless you have some crazy setup) and then you can self tune from there. The software helps to do the math for you while you are tuning. It doesn't tune for you. I still recommend paying Kane to "teach you to fish", it makes understanding things much easier and if you get in a bind he is easy to talk to and makes himself very available. Plus, nothing is a secret, so as we all learn we can share and explain things to each other that we might be having a problem with.

Like for example, I am about to call Chris (maybe I shouldn't have warned him) to pick his brain about a few things. Like anything else though, if you don't pay attention and focus you can **** some **** up.

shadycrew31

iTrader: (6)

Yea I'll prolly go that route with Kane...

Kane

iTrader: (1)

That made me LOL, we got lucky on that deal.

FYI, the base tune is relative, the point of the software is the base tunes come out of the tunes that are already working for everyone. But Like you said, if you have some totally crazy off the wall set up, you will not likely have a good base tune available.

If only I could partner with someone to help with that....

shadycrew31

iTrader: (6)

Nothing too crazy, just a td06h 20g, a larger intercooler and uncapped stock yellows. Everything else is pretty standard from the greddy.

Chris

iTrader: (10)

Heh!

Kane

iTrader: (1)

Nah, that isn't bad. The air intake will affect you way more than the other items you mentioned.

shadycrew31

iTrader: (6)

Sweet thats good to hear! I'll try and do something crazy with the intake just to stump you guys! (Sarcasm)

shadycrew31

iTrader: (6)

Just to update everyone here is my old CHRA pieces with the rebuild kit fresh back form getting cleaned and balanced by G-Pop shop. I am rebuilding this for another member and still using my 20g CHRA.

This is the seal plate I had to replace, I believe this turbo had some oil starvation/burning issues from looking at all pieces. Supposedly this thing only had 7k on it...




Here are all the components Minus the center section of course.



Here is the cleaned wheel, they did a kick *** job cleaning the parts.

Before cleaning on the right


After

Brettus

iTrader: (2)

mmmmm - cleeeeeean !

Now go get it dirty again !