Comming Soon Turbo Build
#1
Registered
Thread Starter
Join Date: Jun 2006
Location: Laveen,Az
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
Coming Soon Turbo Build
i Putting together a custom turbo build and just want some review on the setup
Garrett GT3582R Ball Bearing
56 trim compressor wheel
0.70 AR compressor housing
Turbine Specifications:
84 trim turbine wheel
Tial 46mm wastegate
TurboXS Type H-RFL OR HKS SSQV BOV
Apexi AVC-R Boost Controller
Mazsport ignition and fuel pump upgrade
but i know there is more to add but this is just starting out
Garrett GT3582R Ball Bearing
56 trim compressor wheel
0.70 AR compressor housing
Turbine Specifications:
84 trim turbine wheel
Tial 46mm wastegate
TurboXS Type H-RFL OR HKS SSQV BOV
Apexi AVC-R Boost Controller
Mazsport ignition and fuel pump upgrade
but i know there is more to add but this is just starting out
Last edited by sauceyI986; 04-27-2008 at 02:46 AM.
#3
Registered
Thread Starter
Join Date: Jun 2006
Location: Laveen,Az
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
well i plan to have a shop called turblown here in az since i seen there work i e-mailed the guy back and forth a little but and was going to have it done last year in the summer but something had came up. But my look im going for is how the rx-7's engine bay look like.
#6
I'd never heard of them, so I checked out their website (turblown.net). They've got some pretty impressive stuff going on there. Very nice picture gallery.
Can't wait to see how it'll look Saucey.
Can't wait to see how it'll look Saucey.
#12
#14
Original Turbo 'd Auto !!
I don't think so. I don't remember ever seeing his 8 in Tublowns shop. Also that Turblown whipped up a very nice Top mount manifold for my setup.
Pics are in my links in my signature.
Pics are in my links in my signature.
#15
Registered
Thread Starter
Join Date: Jun 2006
Location: Laveen,Az
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
Old post but everytime time I got ready for it things came up. Now at this point and time my engine went out on me on friday. Mazda isn't goin go cover it so I'm like I might as well do it the right way. I'm just drop in a 13b-tt using a sinle turbo I can be turboes and ported for less than messing with an engine that's has the same issue.
#18
Registered
Thread Starter
Join Date: Jun 2006
Location: Laveen,Az
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
I understand it wont drop in but i guy In phoenix just barley opend up a shop his real good with rotories and electronics I may go with f-commandor or with the intercepter because I want to power steering and such as well as gauges the hard part it waiting for Tuesday to come so can get my car over to the shop
#19
I understand it wont drop in but i guy In phoenix just barley opend up a shop his real good with rotories and electronics I may go with f-commandor or with the intercepter because I want to power steering and such as well as gauges the hard part it waiting for Tuesday to come so can get my car over to the shop
I would go with a well known shop that has been in business for a while for something like this.
Check out what the guys at Turblown just completed for me;
http://www.rx7club.com/showthread.php?t=887476
This car lays patches at freeways speeds...
Thread
Thread Starter
Forum
Replies
Last Post
jay_tibo
Series I Aftermarket Performance Modifications
22
09-13-2016 08:10 PM
Touge
Canada Forum
0
07-28-2015 09:52 PM