Brettus turbo 111 (the ultimate Renesis turbo ?)
Thread Starter
Boosted Kiwi
iTrader: (2)
Joined: Apr 2006
Posts: 20,844
Likes: 1,798
From: Y-cat-o NZ
Had a quick look just now . The turbine side is certainly large enough but the compressor side is too small on both of them . IMO
The GT3788 looks like a better match to me but is too big (physically)for what I'm doing .
Last edited by Brettus; Jul 18, 2015 at 01:11 PM.
There are new GTW options that look interesting for a rotary just by compressor vs turbine sizing, but the maps are not out yet and I think they are longer overall due to a new, larger chra
And the housings are all different now too I think ...
And the housings are all different now too I think ...
Thread Starter
Boosted Kiwi
iTrader: (2)
Joined: Apr 2006
Posts: 20,844
Likes: 1,798
From: Y-cat-o NZ
If they brought the GTW out with a lightweight turbine ...... that would be competition for the EFR series
Thread Starter
Boosted Kiwi
iTrader: (2)
Joined: Apr 2006
Posts: 20,844
Likes: 1,798
From: Y-cat-o NZ
Thread Starter
Boosted Kiwi
iTrader: (2)
Joined: Apr 2006
Posts: 20,844
Likes: 1,798
From: Y-cat-o NZ
Even if you paste the pic link or grab it off your device, but don't save it the site now stores it whether you like it or not
Kind of f'd up ...
.
Kind of f'd up ...
.
Last edited by TeamRX8; Jul 19, 2015 at 11:52 PM.
Thread Starter
Boosted Kiwi
iTrader: (2)
Joined: Apr 2006
Posts: 20,844
Likes: 1,798
From: Y-cat-o NZ
The good news is I did some tuning for a well known rotary shop yesterday (PPRE) and in exchange I get a day on the dyno with the main man there helping me . So I should be able to get this thing dialed in pretty well .
Last edited by Brettus; Jul 21, 2015 at 03:04 PM.
Thread Starter
Boosted Kiwi
iTrader: (2)
Joined: Apr 2006
Posts: 20,844
Likes: 1,798
From: Y-cat-o NZ
Thanks for that Team . I already have some resistors I was going to use to decrease voltage by 10% which should be good to 500g/s . Was going to try it beforehand but never got around to it .