GTSimmo

I just installed my Pro Sport Gauges last week. Originally I had Oil Pressure, Oil Temp, and Volt gauges. The Volt gauge read 12 volt with engine off and 14 volt with the engine running. I wired it to the cig lighter like the rest of you guys.

Last night I changed the volt gauge for the Water Temp Gauge.

My oil temp are about 160-170 while on the freeway and reach about 180 to 200 parked or stopped at a light.

My water temp are about 170-180 degrees while on the freeway and jump to 200 degree on the street/parked. This was after a 30 min freeway drive at about 60-85 mph. It was approx 83 degree out today during the drive.


These are the regular Performance gauges from Pro Sport and not the premium line. I used the Pro Sport adapter for mounting the oil pressure/temp sender and a Racing Beat Water temp adapter with a 3/8 inch to 1/8 inch adapter for mounting the Pro Sport water temp sender. Also don't know if it makes a difference or not but my car is a 2006 6 port Automatic. Mods are RB intake/duct, RB exhaust and Agency pulley.

Edit: Opps didnt see the new thread hehe.

Pictures of gauges while parked after getting off freeway.

Water Temp


Oil Temp