Metra kit update (need cable? look here)
Hey guys, I've read through a lot of this thead, but I apologize if I missed someone mentioning this. I was going to order my Metra kit from autotoys.com, which says that they flash update the kit with the latest firmware, before they ship it out.
Anyone order from these guys? I'm hoping if they do update the box, that I won't need to wait for the cable to get mailed to me. Here's a link:
http://www.autotoys.com/x/product.php?productid=10886
I was also concerned about the quality of the gloss finish on these kits, and was hoping I could get some more opinions about how well it matches the stock dash.
Thanks!
Anyone order from these guys? I'm hoping if they do update the box, that I won't need to wait for the cable to get mailed to me. Here's a link:
http://www.autotoys.com/x/product.php?productid=10886
I was also concerned about the quality of the gloss finish on these kits, and was hoping I could get some more opinions about how well it matches the stock dash.
Thanks!
FYI all:
I sent the cable to Brandi in ID a few days ago. She should get it soon.
The update works gret BTW. Took about 2 minutes to download, 2 minutes to flash!
I have the matte black kit, so I cannot attest to the gloss finish unit. But I can say the matte finish matches great to the blacks around the center of the car. The gloss finish would probably look a little nicer though.
Ed
I sent the cable to Brandi in ID a few days ago. She should get it soon.
The update works gret BTW. Took about 2 minutes to download, 2 minutes to flash!
I have the matte black kit, so I cannot attest to the gloss finish unit. But I can say the matte finish matches great to the blacks around the center of the car. The gloss finish would probably look a little nicer though.
Ed
Hey guys, I've read through a lot of this thead, but I apologize if I missed someone mentioning this. I was going to order my Metra kit from autotoys.com, which says that they flash update the kit with the latest firmware, before they ship it out.
Anyone order from these guys? I'm hoping if they do update the box, that I won't need to wait for the cable to get mailed to me. Here's a link:
http://www.autotoys.com/x/product.php?productid=10886
I was also concerned about the quality of the gloss finish on these kits, and was hoping I could get some more opinions about how well it matches the stock dash.
Thanks!
Anyone order from these guys? I'm hoping if they do update the box, that I won't need to wait for the cable to get mailed to me. Here's a link:
http://www.autotoys.com/x/product.php?productid=10886
I was also concerned about the quality of the gloss finish on these kits, and was hoping I could get some more opinions about how well it matches the stock dash.
Thanks!
Brandi - do you have any pics of the dash piece?
just got the cable the other day, hopefully I'll be able to get the dash apart today and get it updated. sorry for the late response Olo, was plannin on takin a pic and posting it up.... but my week got crazy lol. If you want I can still do it?
Should I just PM you my address so you can send it to me when you're done? Not exactly sure what the protocol is here...
there is a list you'll get added to, not sure who's in charge of updating that list though... but I was surprised wit how quick it got to be my turn for the cable... I'll take a pic today and post it up.
Here's the latest list:
brandirena86 - Meridian, ID - currently has cable
lynchy803 - MA
Rxster - Phoenix, AZ
fireflypulse - Orange County, CA
i0nicx - levittown, ny(long island)
Olorin2 - Baltimore, MD
If anyone listed no longer wants the cable, please update it.
Thanks!
Glad you got the cable Brandi, and in pretty quick time coming from me up here in Canadaland!


lol yeah when I saw the address on the shipping label was pretty surprised myself. but anyways got it updated, screen is up and working now.... but there is a problem that wasn't fixed after the update and I'm starting to wonder if anyone else has had this issue?? when we installed it to begin wit (after purchase) we went to change the time on my stock display and all of a sudden my buttons stopped working. so this entire time my a/c has been stuck on (can't turn it off), my rear defrost button doesn't function.... so can't turn that on, and my front defrost button says it's stuck on (light is always on) but I can turn it off with my middle mode button. did anyone else here have these same issues?? or is there something else I should be checking into lol. just want to figure it out before I send out the cable to the next person. thank you.
EveryonesFavouritePenguin
iTrader: (2)
Joined: Dec 2009
Posts: 151
Likes: 0
From: Stoney Creek, Ontario
You might have pinched your harness. Or Pulled a wire out from the harness.
I did that with my car, and the HVAC controls would be stuck with the lights on, and wouldn't respond to any button presses.
Here: https://www.rx8club.com/showpost.php...8&postcount=17
I did that with my car, and the HVAC controls would be stuck with the lights on, and wouldn't respond to any button presses.
Here: https://www.rx8club.com/showpost.php...8&postcount=17
EveryonesFavouritePenguin
iTrader: (2)
Joined: Dec 2009
Posts: 151
Likes: 0
From: Stoney Creek, Ontario
Yup!
I noticed that I had pulled on the left hvac harness and a red wire had been pulled out. So you need to check the harness to make sure that all the wires aren't broken or detached.
I noticed that I had pulled on the left hvac harness and a red wire had been pulled out. So you need to check the harness to make sure that all the wires aren't broken or detached.
kk thankx.... one more question lol... didn't think to ask cuz I thought my settings reset on the head unit but now my Alpine screen only stays on for like 3 seconds. It's still playing music but it'll just go black, looked through the settings and there is nothing for this. wondering if the update messed wit something? or maybe it's just another loose wire lol, well anyways time to pm the next person on the list.
Last edited by brandirena86; Jan 19, 2011 at 01:56 PM. Reason: typo lol
EveryonesFavouritePenguin
iTrader: (2)
Joined: Dec 2009
Posts: 151
Likes: 0
From: Stoney Creek, Ontario
The radio harness has nothing to do with your hvac, to my knowledge. The update wouldn't have anything to do with your head unit. Open it back up and check the wiring. Make sure that you didn't create any pointy edges when you were installing the metra kit. Make sure none of the wires are punctured, or pulled on a bunch. Assure everything has a proper connection, and then try the unit while it's still all open.
I just went and bought a Metra dash kit and am installing it today. Should I update mine? Ive been looking for the reason as to why you all are updating and have gotten the jist of it from this thread but dont know the full reason. Is the Kit's harness messing up?
The radio harness has nothing to do with your hvac, to my knowledge. The update wouldn't have anything to do with your head unit. Open it back up and check the wiring. Make sure that you didn't create any pointy edges when you were installing the metra kit. Make sure none of the wires are punctured, or pulled on a bunch. Assure everything has a proper connection, and then try the unit while it's still all open.
also pm'd the next person up the other day, nothing yet but hopefully I hear back from him soon so I can send out the cable.
Last edited by brandirena86; Jan 19, 2011 at 01:57 PM. Reason: forgot something
Filth in a world of Clean
iTrader: (2)
Joined: Mar 2010
Posts: 517
Likes: 0
From: Somewhere in 3rd gear
brandirena86 - Meridian, ID - currently has cable
lynchy803 - MA
Rxster - Phoenix, AZ
fireflypulse - Orange County, CA
i0nicx - levittown, ny(long island)
Olorin2 - Baltimore, MD
Dirt_Nasty - Louisville, KY
lynchy803 - MA
Rxster - Phoenix, AZ
fireflypulse - Orange County, CA
i0nicx - levittown, ny(long island)
Olorin2 - Baltimore, MD
Dirt_Nasty - Louisville, KY



