Lost Post about putting subs between rear seats, help me find it?
01-09-2005, 11:28 PM
#27
Registered User
Join Date: Jan 2005
Location: Cali
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
I did the install with a single JL 8W3v2. the thread is posted elsewhere but you can see the pics here. http://www.msnusers.com/RX8Sub/
If you have the cash you might go for the 8W7 as it provides much more volume and deep bass than the 8w3v2. The 8w3v2 fit my budget and my desire for bass. Also the 8w3v2 was not nearly as deep as the 8w7 so I was able to keep a fair amount of my trunk space. I plan to install a rear strut tower brace so I did not want to give away too much trunk space.
How does it sound? Well paried to a JL 250/1 it is fills in the lows quite nicely. I am a fan of smaller subs because they attack the bass more quickly resulting in a crisper bass sound. If you like rumble then you should get a 10" or 12" and seal it in the trunk. That is not to say that this setup does not provide that low bass rumble but it is not nearly as much as you would get from a 12" in the trunk. The sound is very different when you expose the sub to the air inside the vehicle. I had to play around with the amp settings for a while until I had the sound I was after. I finally set the amp crossover to 65hz and that worked out perfect.
If you are thinking about two 6" speakers I think you will get much better sound out of a JL 8W7 instead. That Subwoofer should be the reference standard for all subs.
See the following threads for more info:
https://www.rx8club.com/series-i-interior-audio-electronics-24/post-your-sub-amp-setup-49280/
https://www.rx8club.com/series-i-interior-audio-electronics-24/jl-audio-subwoofer-install-48837/
Cuzzin
If you have the cash you might go for the 8W7 as it provides much more volume and deep bass than the 8w3v2. The 8w3v2 fit my budget and my desire for bass. Also the 8w3v2 was not nearly as deep as the 8w7 so I was able to keep a fair amount of my trunk space. I plan to install a rear strut tower brace so I did not want to give away too much trunk space.
How does it sound? Well paried to a JL 250/1 it is fills in the lows quite nicely. I am a fan of smaller subs because they attack the bass more quickly resulting in a crisper bass sound. If you like rumble then you should get a 10" or 12" and seal it in the trunk. That is not to say that this setup does not provide that low bass rumble but it is not nearly as much as you would get from a 12" in the trunk. The sound is very different when you expose the sub to the air inside the vehicle. I had to play around with the amp settings for a while until I had the sound I was after. I finally set the amp crossover to 65hz and that worked out perfect.
If you are thinking about two 6" speakers I think you will get much better sound out of a JL 8W7 instead. That Subwoofer should be the reference standard for all subs.
See the following threads for more info:
https://www.rx8club.com/series-i-interior-audio-electronics-24/post-your-sub-amp-setup-49280/
https://www.rx8club.com/series-i-interior-audio-electronics-24/jl-audio-subwoofer-install-48837/
Cuzzin
01-10-2005, 07:03 PM
#28
Registered User
Originally Posted by complex
well then....theres not many 6" subs are there.wouldnt 1 high quality 8 sound alot better?
But with two 6W0's in a .5 Cubic foot ported box tuned to 30Hz with 200 Watts behind and it would make for some quality bass.
Quantity? Not really.
-Mr. Wigggles
01-12-2005, 11:32 PM
#31
Guest
Posts: n/a
Subs sound a bit different vs. mids and highs. Mids and especially highs are directional. Subs (low frequency) are not as directional. Whether its in the trunk or facing outward from between the seats, there will be some standing waves that will result in some weak bass response in certain spots. Without hearing it first, I personally will not do this type of install. The last thing I want is to spend all that time and money to do an install only for it to sound bad from the drivers/passengers seat. Trunk enclosures generally sound better because the trunk acts as an acoustic cavity to amplify the sound, but certain resonant frequencies will cause the back dash to rattle unless you use dynamat or something similar.
01-13-2005, 05:20 PM
#32
Registered User
For a standing wave to occur, a dimension of the accoustic chamber, inside of box or listening area, has to be longer than the wavelength.
For 80Hz and below, the wavelength is above 12 feet. That is longer than any dimension in the cabin area. Standing waves cannot result.
-Mr. Wigggles
For 80Hz and below, the wavelength is above 12 feet. That is longer than any dimension in the cabin area. Standing waves cannot result.
-Mr. Wigggles
11-08-2011, 03:10 PM
#34
Administrator
iTrader: (7)
holy FREAKING thread resurrection Batman~!
6 years later...
6 years later...
Thread
Thread Starter
Forum
Replies
Last Post
Pelleilee
New Member Forum
6
09-29-2019 10:07 AM
akagc
RX-8's For Sale/Wanted
7
08-11-2015 07:07 PM
