DIY: RB Gauge Pod + Nordskog Digital Gauges
#78
Administrator
Thread Starter
iTrader: (7)
it was the first thing I checked and there were zero leaks.
#80
Administrator
Thread Starter
iTrader: (7)
nuke: PM me what kind of gauges you got and what the brackets look like.
#81
Metatron
iTrader: (1)
I just did an RB ashtray pod, with prosport gauges - I put a small piece of aluminum 'L' across the back of all three gauges - holding them tight together made a pretty solid mount.
Then a little black silicone (we call that 'radio glue') around the hole to hold in place.
S
Then a little black silicone (we call that 'radio glue') around the hole to hold in place.
S
#82
Zoom-Freakin'-Zoom
iTrader: (5)
I just did an RB ashtray pod, with prosport gauges - I put a small piece of aluminum 'L' across the back of all three gauges - holding them tight together made a pretty solid mount.
Then a little black silicone (we call that 'radio glue') around the hole to hold in place.
S
Then a little black silicone (we call that 'radio glue') around the hole to hold in place.
S
beers
#83
Never Blend In
iTrader: (2)
I just did an RB ashtray pod, with prosport gauges - I put a small piece of aluminum 'L' across the back of all three gauges - holding them tight together made a pretty solid mount.
Then a little black silicone (we call that 'radio glue') around the hole to hold in place.
S
Then a little black silicone (we call that 'radio glue') around the hole to hold in place.
S
#84
Administrator
Thread Starter
iTrader: (7)
nuke: just sent ya a PM
#85
Registered
iTrader: (2)
Join Date: Aug 2008
Location: San Diego, Ca
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
Finally almost there.
I just installed all the wiring and gauges.
Only thing is Racing Beat got a bad batch of Oil Temp/Pres Adaptors so I need to wait for one to be shipped.
Here is a pic. Remember the Firs to readings are off.
THanks Jedi for the awesome how to.
Only thing is Racing Beat got a bad batch of Oil Temp/Pres Adaptors so I need to wait for one to be shipped.
Here is a pic. Remember the Firs to readings are off.
THanks Jedi for the awesome how to.
#86
Administrator
Thread Starter
iTrader: (7)
you got the sending units from RB?
#90
Administrator
Thread Starter
iTrader: (7)
Thanks renesis, glad to hear it worked out for you!!
how did the install go? Which gauges did you go with?
how did the install go? Which gauges did you go with?
#91
Registered
iTrader: (1)
Guys I need help. I bought nexus gauges and need some help to wire them correctly.
I need to connect one wire to constant +12v source(musst stay powered during engine startup and while ignition switch is off) and one wire to switched +12v source(must stay powered during engine start and crank but turn off when the ignition switch is off).
Thanks
I need to connect one wire to constant +12v source(musst stay powered during engine startup and while ignition switch is off) and one wire to switched +12v source(must stay powered during engine start and crank but turn off when the ignition switch is off).
Thanks
#96
Administrator
Thread Starter
iTrader: (7)
I tried uploading Racing Beat's instructions but the file is too big. the PDF is 5mb.
#98
Administrator
Thread Starter
iTrader: (7)
no problem trustbuddy, let me know if you decide to do the install and I can email the instructions.
on a side note: Racing Beat and Nordskog should pay me for all the business I've sent them.
on a side note: Racing Beat and Nordskog should pay me for all the business I've sent them.
#99
8lover
Join Date: Jun 2009
Location: kansas, soon to be hawaii
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
wow very very nice job, it makes me want to do it but i have a feeling it willnt turn out as good as your and ill get mad and just rip mine out and have a hole there. lol