AVIC-D3 install with Corksport RX-8 Kit
Thread Starter
Drive Like you stole it
Joined: Jul 2006
Posts: 406
Likes: 0
From: Knoxville, TN
Originally Posted by snipaz2420
rx8guy do the controls on the steering wheel work with the new unit you installed????
Thread Starter
Drive Like you stole it
Joined: Jul 2006
Posts: 406
Likes: 0
From: Knoxville, TN
Originally Posted by u1cracka
Did you get a chance to scan the instruction yet. Does it say how to fit just a single DIN radio in there.
U1cracka
U1cracka
Registered
Joined: Jan 2004
Posts: 206
Likes: 0
From: Cambridge, MA - 617
Originally Posted by BOOSTD 7
I'm actually the final guy to talk to about setting up Group Buys. I'm emailing CorkSport right now with a link to this, going to ask them to get a GB going here 
-p23
edit: Link them to the Corksport New Stereo Kit thread... it's a much better representation of the interest there is on this board...
https://www.rx8club.com/series-i-interior-audio-electronics-24/corksport-new-stereo-kit-85326/
Last edited by portero23; May 3, 2007 at 11:12 AM.
Well, the time has come. Corksport finally released the working version of the dash kit for our cars. Today at about noon, I received my kit. I was like a small child on christmas day, tearing into the package. I ordered the kit in Piano black, without the steering wheel controls, and without the Bose adapter (even though i use to have bose, the non bose adapter works fine) Here is a picture of what is included:
(click all pictures to make larger)
AC Control Module
Wiring Harness
Close up of the Face
Face with the AC ***** and 4-way button installed
Brackets mounted to the Nav unit
If you have been reading the other thread, you guys know I was running late to work today and wasnt able to take pics. I have the unit installed, but the car isnt back together yet. So far I am extremely pleased with the product that Corksport has produced.
*The A/C and Heater both work flawlessly
*The Piano black finish is a perfect match to factory
*You do retain all the A/C functions on the LED screen, but you do loose the clock (no biggie, the nav unit is easily read)
*The installation instructions are extremely easy to follow.
It is now 1:47Est. I am planning to be up and going at 9am to finish the install. At that time, I will post more pics of the final product, allong with scans of the instructions.
Hope the pics I did post will hold you guys off for a couple hours haha
(click all pictures to make larger)
AC Control Module
Wiring Harness
Close up of the Face
Face with the AC ***** and 4-way button installed
Brackets mounted to the Nav unit
If you have been reading the other thread, you guys know I was running late to work today and wasnt able to take pics. I have the unit installed, but the car isnt back together yet. So far I am extremely pleased with the product that Corksport has produced.
*The A/C and Heater both work flawlessly
*The Piano black finish is a perfect match to factory
*You do retain all the A/C functions on the LED screen, but you do loose the clock (no biggie, the nav unit is easily read)
*The installation instructions are extremely easy to follow.
It is now 1:47Est. I am planning to be up and going at 9am to finish the install. At that time, I will post more pics of the final product, allong with scans of the instructions.
Hope the pics I did post will hold you guys off for a couple hours haha
so do I need the bose adapter ?
Thread Starter
Drive Like you stole it
Joined: Jul 2006
Posts: 406
Likes: 0
From: Knoxville, TN
Thread Starter
Drive Like you stole it
Joined: Jul 2006
Posts: 406
Likes: 0
From: Knoxville, TN
Well, bad news.. When I installed my kit, it was 90+ outside... what I thought was heat was only air from outside 
I checked all my connections and everything is good. I talked with Derick from corksport about this issue. After some troubleshooting and some research on his end, he found out that that the manufacturer left out one 2-3in adapter that is needed for the heat... They are aware of the issue and are going to get them out asap... Not a big deal for me right now, being that we are just starting summer... Just thought i would give you guys the semi-bad news....
I checked all my connections and everything is good. I talked with Derick from corksport about this issue. After some troubleshooting and some research on his end, he found out that that the manufacturer left out one 2-3in adapter that is needed for the heat... They are aware of the issue and are going to get them out asap... Not a big deal for me right now, being that we are just starting summer... Just thought i would give you guys the semi-bad news....
Registered User
Joined: Jun 2006
Posts: 101
Likes: 0
Well, bad news.. When I installed my kit, it was 90+ outside... what I thought was heat was only air from outside I checked all my connections and everything is good. I talked with Derick from corksport about this issue. After some troubleshooting and some research on his end, he found out that that the manufacturer left out one 2-3in adapter that is needed for the heat... They are aware of the issue and are going to get them out asap... Not a big deal for me right now, being that we are just starting summer... Just thought i would give you guys the semi-bad news....
I checked all my connections and everything is good. I talked with Derick from corksport about this issue. After some troubleshooting and some research on his end, he found out that that the manufacturer left out one 2-3in adapter that is needed for the heat... They are aware of the issue and are going to get them out asap... Not a big deal for me right now, being that we are just starting summer... Just thought i would give you guys the semi-bad news....Did he say how long it would take I was going to order my dash kit tommorow.
U1cracka
Thread Starter
Drive Like you stole it
Joined: Jul 2006
Posts: 406
Likes: 0
From: Knoxville, TN
Spastic Monkey
Joined: Mar 2006
Posts: 414
Likes: 0
From: Kirkland
Cutting the Road & Wax
Joined: Mar 2007
Posts: 190
Likes: 0
From: Morton Grove, IL
I placed my order today .... i guess that the heat doesnt matter right now as long as they fix it later and all .....
for the people that did it so far ... which i dont think that that many so far .... i never really installed a stereo in a car and all before .... is it hard to install that stuff ?
for the people that did it so far ... which i dont think that that many so far .... i never really installed a stereo in a car and all before .... is it hard to install that stuff ?
Last edited by djkrazy; May 8, 2007 at 12:19 PM.
zoooo00000m-*beep*
Joined: Jan 2005
Posts: 86
Likes: 0
From: Houston, TX, USA
Well, bad news.. When I installed my kit, it was 90+ outside... what I thought was heat was only air from outside I checked all my connections and everything is good. I talked with Derick from corksport about this issue. After some troubleshooting and some research on his end, he found out that that the manufacturer left out one 2-3in adapter that is needed for the heat... They are aware of the issue and are going to get them out asap... Not a big deal for me right now, being that we are just starting summer... Just thought i would give you guys the semi-bad news....
I checked all my connections and everything is good. I talked with Derick from corksport about this issue. After some troubleshooting and some research on his end, he found out that that the manufacturer left out one 2-3in adapter that is needed for the heat... They are aware of the issue and are going to get them out asap... Not a big deal for me right now, being that we are just starting summer... Just thought i would give you guys the semi-bad news....
Everything is working fine for me except for the temperature dial.
Spastic Monkey
Joined: Mar 2006
Posts: 414
Likes: 0
From: Kirkland
The only two difficult bits are the famous 10mm bolt that's on the side of the radio holding it in place - it's a bastard to get out and even more difficult to get back in. You'll need a flashlight to see what you're doing and a socket with a ~6" extension. There are ample pictures on this very forum about where this thing is located and I personally found them extremely helpful the first time I removed my factory HU. FYI - I didn't bother putting the 10mm bolt in after installing the aftermarket HU.
The other difficult bit is just getting all the wires to fit. Your milage may vary on this one depending on your HU of choice.