I installed a JVC single DIN deck today, wired everything up, put the dash kit in turned it on (powers up fine) used a test light to all the wires...12v, ign, amp turn on everything lights up but nothings coming out of the speakers:s I do have the bose system so im wondering if theres a blown fuse on the factory amp? If anyone could chime in thatd be great..def lost here

 

I got the day off so I was going to pull the amp and test it out, can anyone tell me where it's located?

 

stick your head in the trunk and look straight up, between the two speakers it is held up

 

alright so I unplugged the amp and jumped a wire to one of the speakers and poof! music was playing...crazy how my amp would blow just as I install a deck:S anyone have a 4 channel amp for sale? haha

 

I know this might be a pain but, you should try unplugging new H/U and hook up old bose and see if it is the amp or maybe the install, I've heard the bose can be tricky.

 

did you connect the speaker outputs directly to the wiring harness or did you use line output converters to go from the RCA outs to the wiring harness?

 

SERIOUSLY doubt your Bose amp fried all by itself. Seriously doubt it's fried at all.

 

Ok so I am having the same issue. I just installed a Kenwood navi with the METRA
95-7510HG, all controls worked fine however I have no sound. I pulled it out and checked all wires, still nothing. I even took an rca and cut it up and went from the line out to the speaker connections and still nothing. Anyone have any ideas. Is there another adapter that I need for the bose or is it maybe a bad kit? I know the Kenwood works. We even tested it back in my truck that I just deinstalled it from yesterday.

 

??? You mean you cut the end off an RCA cable and touched it directly to the speaker's + and - terminals?

I'm no Bose expert, but something like this usually means the remote turn on for the stock amp is not connected.

 

did you connect the amp turn on (remote) wire to the wiring harness? it will be the blue or blue/white wire. you need to connect that to turn on the Bose amp

 

I might be the biggest idiot, It has been along time since I have done an install... Let me check it and I will let you guys know if I am a tool...

 

Is there an echo in here?

 

i have the same issue i connect all wires but no sound! if anyone knows how connect(right way) the wires to the unit please let us know!!!!! thanks

 

...so did sr101 and neokhz get their problems solved or not?

 

I tried hacking in some RCA terminals and still couldn't get sound so I gave up and installed a 4 channel and upgraded all the speakers. Works great now haha, thanks for all the input