rx8 w/ lambo doors
#26
2.5 inches at the lowest point. When you open the door you will either have to hold it until fully open or invest in actuators, because if you dont you will probably rip the fender off of the car, keep in mind it is around 250 pounds of pressure behind those struts.
#30
90% Carbon-100% Power
Join Date: Apr 2004
Location: Thessaloniki,GREECE
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
Ηey veilside...The gt factory kit had 4 struts in the box right???You installed them right???So the door can hold up and open-close easy right??No extra force needed to open or close or hold it open right???strong mechanism...
#32
90% Carbon-100% Power
Join Date: Apr 2004
Location: Thessaloniki,GREECE
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
I ll install gt factory kit in 2 weeks...many many pics from all the angles...Also thanks veilsiderx8 for the pics...I wait for the fender pic...
#33
Ex- member.
I saw an rx8 with lambo doors this weekend at a car meet. I didn't get a chance to meet the owner but it looked good. There was alot of room to get in/out.
Pictures are from my camera phone.
I have no info on brand or cost, sorry.
Pictures are from my camera phone.
I have no info on brand or cost, sorry.
#38
Registered User
Join Date: May 2004
Location: canada
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
doors
The only problem is how do you close those gt diablo doors from the inside...you can't reach the handle......Mine you can..that is the difference betweend both hinges.
#39
you probably do what the lambo's do, and put a leather strap somewhere. Then again, I have yet to see one of these kits that offers anywhere near the looks or operation of the real thing, so who knows.
#41
90% Carbon-100% Power
Join Date: Apr 2004
Location: Thessaloniki,GREECE
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
It is not bolt on..In the site they say so but its for commercial only...
Anyway...It needs a lot of job...I recently send the kit to the bodyshop which wil install mine and they told me they need a lot of job.And they also need arrounc 900+ usd to install it....Wow..The price of the kit twice...Anyway i hope that money will be the last spend this year...
Anyway...It needs a lot of job...I recently send the kit to the bodyshop which wil install mine and they told me they need a lot of job.And they also need arrounc 900+ usd to install it....Wow..The price of the kit twice...Anyway i hope that money will be the last spend this year...
#43
Registered User
Join Date: Mar 2005
Location: Spore (Bishan)
Posts: 826
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by storemannormin
mine were designed for the rx-8...they were a bolt on also...
From the below pictures, one can clearly see the diff between the door kit offer by 2 difference companys
1st picture show that the hinge is a C shape design, and the door is being support by this Cshape thing.
and 2nd picture show that the door is support by the hydraulic piston
I;m going to buy one set of the door kit but do not know which is better. so many companies selling and do not know who to buy from
Can anyone advice?
Thanks
Morgan
#45
#50
90% Carbon-100% Power
Join Date: Apr 2004
Location: Thessaloniki,GREECE
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
Gt factory is the best but need a VERY PROFESSIONAL INSTALLATION or you might have problems...I am going to install second strut in each door and i made new panels on the door cause i had clearance problem when it was fully open and made some scratches...