Replacing lenses
#1
Replacing lenses
Does anyone know where i could buy clear lenses to replace the fresnel lenses? I wanna start a project of modifying the cutoff shield and replacing the lenses but I don't know where to start even looking for a new pair of lenses?!?! Ebay?? Clear lenses I should say...
#2
Registered Laker's Fan
Join Date: Aug 2003
Location: By da beach, Cali.
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
I wanted/did this as well, I asked for feedback, but got very little intrest. All I can suggest is checking on ebay or the junkyards, as I could not find a vendor. Take a look.. good luck
.https://www.rx8club.com/rx-8-multimedia-photo-gallery-6/updated-baked-headlights-132192/
Stock headlight
Modded headlight
.https://www.rx8club.com/rx-8-multimedia-photo-gallery-6/updated-baked-headlights-132192/
Stock headlight
Modded headlight
#3
Thanks I appreciate but when you bot your clear lenses what exactly were you looking for??? I just don't think I'm gonna "google" clear lenses and its gonna pop up. Any suggestions? How did you find yours?
#4
Registered Laker's Fan
Join Date: Aug 2003
Location: By da beach, Cali.
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Baking headlights...
After getting the headlights off the car, remove all metal screws and lights. Preheat the over to 250 degrees for about six minutes then place headlights in the oven, on the bottom rack,do not place them directly on the rack use piece of cardboard or something now metal.Take them out after 10 minutes and try to pry them open. If you are unable poop them back in the oven for another five minutes, that should be plenty of time to let the glue warm up. Oh and dont use anything sharp to pry open the headlights as it could make make a hole in the plastic headlight.
Do the reverse when putting back together. PM me if you need any further help...
Do the reverse when putting back together. PM me if you need any further help...
#5
Registered Laker's Fan
Join Date: Aug 2003
Location: By da beach, Cali.
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Projectors vary in size & shape, same goes for the lense's. Lense's also vary in focal point. By the way the projectors on the RX8 utilize a 2.5 in lense.
#7
Work hard Drive Hard!
Join Date: Aug 2006
Location: south texas
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
go with 3m
Just went to a NAPA sale and there were some people from 3m there. They had 2000 chevy truck that was used up miserably and they made the lenses look like new!!!! I believe it was no more than 175-200 bones. They now have a contract with mercedes and they charge 90 dollars a treatment. The kit comes with 10 treatments. The kit is a must buy!
Thread
Thread Starter
Forum
Replies
Last Post
LMURailsplitter02
New Member Forum
1
09-06-2015 10:56 PM