New LEDs. Wow! Bright!
Surf Hard, Drive Hard
Joined: Feb 2007
Posts: 7,840
Likes: 13
From: Indialantic, Florida
I got 194 VLED's in just about every damn location you can think of(and maybe some you haven't).
I do notice a slight flicker on the doors but only for an instant.
All others(including maps) are okay.
I do notice a slight flicker on the doors but only for an instant.
All others(including maps) are okay.
Last edited by Mazurfer; Aug 10, 2010 at 07:36 PM.
Surf Hard, Drive Hard
Joined: Feb 2007
Posts: 7,840
Likes: 13
From: Indialantic, Florida
As much as we all hate SPAM E-mail, go to the site and sign-up for the news letter!
Unfortunately, it seems I get my newsletter announcing a sale two days after I drop alot of cash!
Surf Hard, Drive Hard
Joined: Feb 2007
Posts: 7,840
Likes: 13
From: Indialantic, Florida
Yep, I knew about the last sale before it came out, but could've saved about $30.00 if I had waited just a few more days.
Oh, you can also E-mail them on the site and ask if they plan any up coming sales, they are pretty good at responding.
Oh, you can also E-mail them on the site and ask if they plan any up coming sales, they are pretty good at responding.
Just replaced my interior lights (map lights & doors) with 194 rb and was wondering if anyone else flicker a little bit when coming on almost kinda like a strobe light would. I find it werid cause I replaced my parking lights with the same bulb and they don't do that at all. Anyone else have that problem?
It pulses the ground connection ever so slightly.
You can put some electrolytic caps across the circuit to reduce the strobing effect, which is actually detrimental to some LED assemblies, anyway.
Registered Paratrooper
Joined: Apr 2008
Posts: 403
Likes: 0
From: Fort Bragg, North Carolina
The camera that I use is in Argentina right now for work, but I can take pics in a couple of weeks. But basically, I tapped into the cars wiring with some of the wire I picked up at Radio Shack (spool of red, spool of black). Then I tapped a second, longer set of wires into the first (near where they were tapped into the car's wiring) and ran that second pair behind the center consol. I wrapped the pairs in electrical tape and used pinch on quick connectors on the ends so everything is somewhat tidy. Nothing is tapped into the wiring from the LEDs, just added the other ends of the quick connector to the them.
I did the second set much the same way, just tapping into the ashtray light.
As far as wiring up a switch, that should be easy, but I haven't done it so I can't give you instructions. The 6" red LEDs aren't distractingly bright though, and if you connect them to the ashtray light like I did, you can use the car's dimmer **** to adjust the brightness.
I did the second set much the same way, just tapping into the ashtray light.
As far as wiring up a switch, that should be easy, but I haven't done it so I can't give you instructions. The 6" red LEDs aren't distractingly bright though, and if you connect them to the ashtray light like I did, you can use the car's dimmer **** to adjust the brightness.
Any luck on those pictures though? My bad for the late response, just got back from Afghanistan last week and they've been working us to death so I've had no time for anything besides swapping a few of the 194 bulbs. I did notice one of the parking lights went out a few hours after putting it in so I pulled it back out (The front left unfortunately which is a bitch to get to) and found the solder on one side of the LED broke off somehow and separated the contact points. Ever have that happen to you? Think I maybe hit it while putting it back in?
Thanks again for all the help dude.
Ryan
Last edited by Ryan2008; Aug 12, 2010 at 06:19 PM.
You shouldn't need any kind of resistors. I've had my fogs in for a long time and never had any problems.
crap... i thought the corner lights were the DRLs in Canada but like months after I actually stared at my own car and I realized that the DRLs are next to the corner lights...
Do you American owners have a bulb right next to the corner lights? and what did you do/change it to?
i might just figure out how to disable them completely...
Do you American owners have a bulb right next to the corner lights? and what did you do/change it to?
i might just figure out how to disable them completely...
Surf Hard, Drive Hard
Joined: Feb 2007
Posts: 7,840
Likes: 13
From: Indialantic, Florida
^...try reading?
If that doesn't work, then try searching....... use "bulb list", there is a thread with all bulbs and sizes listed! Jeez!
Took me 30 seconds to find.................. https://www.rx8club.com/showthread.p...ight=bulb+list
If that doesn't work, then try searching....... use "bulb list", there is a thread with all bulbs and sizes listed! Jeez!
Took me 30 seconds to find.................. https://www.rx8club.com/showthread.p...ight=bulb+list
Last edited by Mazurfer; Aug 27, 2010 at 06:53 PM.
i might be calling them the wrong thing, but the lights in the corner (in your pic, left side of pic, the light in the black tube thingy)
in canada, the DRL is the light to the right of the "corner light"
what does it do in the states, and did you change them?
in canada, the DRL is the light to the right of the "corner light"
what does it do in the states, and did you change them?
Surf Hard, Drive Hard
Joined: Feb 2007
Posts: 7,840
Likes: 13
From: Indialantic, Florida
Okay, we call those parking lights, and yes I changed them. They are 194's.
I used http://www.v-leds.com/Exterior-LED/C...81133-1-2.html
They are the same as used in this thread, but here is my thread which is a little shorter and may answer more of you question.
https://www.rx8club.com/series-i-exterior-appearance-body-kits-27/new-vleds-installed-just-dsome-pics-201717/
By the way..............see my next post coming in a few moments! Both here and in my thread!
I used http://www.v-leds.com/Exterior-LED/C...81133-1-2.html
They are the same as used in this thread, but here is my thread which is a little shorter and may answer more of you question.
https://www.rx8club.com/series-i-exterior-appearance-body-kits-27/new-vleds-installed-just-dsome-pics-201717/
By the way..............see my next post coming in a few moments! Both here and in my thread!
Surf Hard, Drive Hard
Joined: Feb 2007
Posts: 7,840
Likes: 13
From: Indialantic, Florida
15% Off until 9/15/10.
Because a lot of us missed the last sale(including me), thought I would let everyone know that I just got an e-mail from VLED's.
Here is the most important part!
New Coupon Code
Our latest Coupon Code is 8CNONU so enter it at checkout!
This is for 15% Off and is good until 9/15/10.
Here is the most important part!
New Coupon Code
Our latest Coupon Code is 8CNONU so enter it at checkout!
This is for 15% Off and is good until 9/15/10.
Because a lot of us missed the last sale(including me), thought I would let everyone know that I just got an e-mail from VLED's.
Here is the most important part!
New Coupon Code
Our latest Coupon Code is 8CNONU so enter it at checkout!
This is for 15% Off and is good until 9/15/10.
Here is the most important part!
New Coupon Code
Our latest Coupon Code is 8CNONU so enter it at checkout!
This is for 15% Off and is good until 9/15/10.
Surf Hard, Drive Hard
Joined: Feb 2007
Posts: 7,840
Likes: 13
From: Indialantic, Florida
No............didn't need to as I have a GT model, so I already had HID's.
Sorry.
Running the same as Aipex8......................picture of my set up and what was used is here. https://www.rx8club.com/showthread.php?t=201717
Sorry.
Running the same as Aipex8......................picture of my set up and what was used is here. https://www.rx8club.com/showthread.php?t=201717
Last edited by Mazurfer; Aug 27, 2010 at 08:40 PM.
No............didn't need to as I have a GT model, so I already had HID's.
Sorry.
Running the same as Aipex8......................picture of my set up and what was used is here. https://www.rx8club.com/showthread.php?t=201717
Sorry.
Running the same as Aipex8......................picture of my set up and what was used is here. https://www.rx8club.com/showthread.php?t=201717
Okay, we call those parking lights, and yes I changed them. They are 194's.
I used http://www.v-leds.com/Exterior-LED/C...81133-1-2.html
They are the same as used in this thread, but here is my thread which is a little shorter and may answer more of you question.
https://www.rx8club.com/showthread.php?t=201717
By the way..............see my next post coming in a few moments! Both here and in my thread!
I used http://www.v-leds.com/Exterior-LED/C...81133-1-2.html
They are the same as used in this thread, but here is my thread which is a little shorter and may answer more of you question.
https://www.rx8club.com/showthread.php?t=201717
By the way..............see my next post coming in a few moments! Both here and in my thread!
im talking about the lights NEXT TO the parking lights
the lights BETWEEN the parking lights and the headlights
im guessing that they're your highbeams
in canada they're dual filament, DRL and high beams...
doesn't look like you changed them...
seeing as how v-leds is having a sale (Thanks Mazufer) I think it's time to swap out some more bulbs.
I currently am running stealth bulbs in the turn signals but am thinking of switchign to the 48 leds: http://www.v-leds.com/Exterior-LED/P...-p4835732.html
I see Aipex has a similar bulb (I think the 24?). Any thoughts on running these up front? Any tips / pics / diy's for the load resisters?
I'm assuming two of these should do the trick? http://www.v-leds.com/BlinkerWarning...-p5679822.html
I currently am running stealth bulbs in the turn signals but am thinking of switchign to the 48 leds: http://www.v-leds.com/Exterior-LED/P...-p4835732.html
I see Aipex has a similar bulb (I think the 24?). Any thoughts on running these up front? Any tips / pics / diy's for the load resisters?
I'm assuming two of these should do the trick? http://www.v-leds.com/BlinkerWarning...-p5679822.html
Last edited by Jedi54; Aug 28, 2010 at 02:23 PM.
Surf Hard, Drive Hard
Joined: Feb 2007
Posts: 7,840
Likes: 13
From: Indialantic, Florida
i think we misunderstood each other...
im talking about the lights NEXT TO the parking lights
the lights BETWEEN the parking lights and the headlights
im guessing that they're your highbeams
in canada they're dual filament, DRL and high beams...
doesn't look like you changed them...
im talking about the lights NEXT TO the parking lights
the lights BETWEEN the parking lights and the headlights
im guessing that they're your highbeams
in canada they're dual filament, DRL and high beams...
doesn't look like you changed them...
Munchy, in Canadian cars the high beams double as DRLs (run at lower voltage). That bulb is an H9 and V-LEDS doesn't sell an LED H9.
H9 and H11 bulbs have very similar bases though. It's not uncommon for people to modify the brighter H9 bulbs to fit in H11 housings. I'm sure you could probably do the oposite and run an H11 bulb in your H9 socket. Keep in mind you will lose your high beams though.
Jedi, yep, two of those load resistors will do the trick. I don't have a pic but they are super easy to install. Install them in the back right next to the taillight.
H9 and H11 bulbs have very similar bases though. It's not uncommon for people to modify the brighter H9 bulbs to fit in H11 housings. I'm sure you could probably do the oposite and run an H11 bulb in your H9 socket. Keep in mind you will lose your high beams though.
Jedi, yep, two of those load resistors will do the trick. I don't have a pic but they are super easy to install. Install them in the back right next to the taillight.
Last edited by Aipex8; Aug 28, 2010 at 11:32 PM.