Getting carbon fiber interior next week....
#1
Registered User
Thread Starter
Join Date: Oct 2003
Location: Mobile, AL
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
Getting carbon fiber interior next week....
...when i was getting my (wrong?) oil changed the other day, the dealer had 2 cars with CF interiors. Not replacement for the plastic, just an overlay. goes over the radio and around controls all the way down over the ashtray and back along the top of the center console. the steering wheel controls and door panel controls.
NO I DO NOT HAVE PIX.
I know this is a requirement, but I didn't have any picture taking devices at the time, but I will definitely post them when it is done. i suspect next week around thursday or so.
oh and here is the kicker.....BLUE for my blue 8, also comes in other colors for around ~$300.
not too gaudy, as I'm very particular about staying away from "rice-ness" and "gay-ness"......
sorry for the teaser, but I had to!
NO I DO NOT HAVE PIX.
I know this is a requirement, but I didn't have any picture taking devices at the time, but I will definitely post them when it is done. i suspect next week around thursday or so.
oh and here is the kicker.....BLUE for my blue 8, also comes in other colors for around ~$300.
not too gaudy, as I'm very particular about staying away from "rice-ness" and "gay-ness"......
sorry for the teaser, but I had to!
#2
Registered User
Join Date: Jan 2003
Location: SF Bay Area
Posts: 1,286
Likes: 0
Received 0 Likes
on
0 Posts
What kind of overlay? Vinyl print or actual CF with clearcoat? The former looks cheesy to me while the latter (as an overlay) would stick up ~2mm at the edges due to thickness right?
________
Hotels In Mexico
________
Hotels In Mexico
Last edited by PUR NRG; 05-01-2011 at 02:46 AM.
#6
Mr. Blue Man
Join Date: Dec 2003
Location: Carmel, IN
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
Omicron,
Sorry to disappoint ... I ordered mine on Tuesday! Yep, blue CF. Outside pillar too .. blue cf. I tried to find the post from the vendor (he spoke very low of the ebay ones - i have no idea how to seperate the quality) but could not find it. But you can bet i will post pics. To bad digital cameras don't run out of film ...
Sorry to disappoint ... I ordered mine on Tuesday! Yep, blue CF. Outside pillar too .. blue cf. I tried to find the post from the vendor (he spoke very low of the ebay ones - i have no idea how to seperate the quality) but could not find it. But you can bet i will post pics. To bad digital cameras don't run out of film ...
#7
Registered User
Join Date: Jan 2003
Location: SF Bay Area
Posts: 1,286
Likes: 0
Received 0 Likes
on
0 Posts
I found two places on the web.
Dash Kit Store
Kickin' Dash
Kickin' Dash doesn't have the RX-8 kit listed on their site but they are selling it on eBay. Are either of those companies the ones you get the parts from?
________
Krystal Steal Pov
Dash Kit Store
Kickin' Dash
Kickin' Dash doesn't have the RX-8 kit listed on their site but they are selling it on eBay. Are either of those companies the ones you get the parts from?
________
Krystal Steal Pov
Last edited by PUR NRG; 05-01-2011 at 02:46 AM.
#8
Registered User
Thread Starter
Join Date: Oct 2003
Location: Mobile, AL
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
In speaking with the female that will installing it, she's says that it real CF, besides I looked at it in 2 vehicles, blue and red and it's the real deal. You'd think the thickness would be int he way or out of place, but it seemed to lay pretty close.
She says it's held on by the same type of 2-sided foam tape used on car badges, so there's no worry of it just "coming off".
she knew nothing of the b-pillars when I mentioned it, though I think that would be over doing it for me on the outside, personal preference.
From what I understand, she doesn't just slap it in, since the manufacturing process isn't 100% perfect she usually have to fine-tune them before locking them in place. The blue is pretty accurate to the paint.
She doesn't recommend the red CF for the red/black interior, it overdoes it too much.
This should be done about the time I get my "other things" from canzoomer.
If you want I can aske her where she gets her stuff rom, mine is on order now.
She says it's held on by the same type of 2-sided foam tape used on car badges, so there's no worry of it just "coming off".
she knew nothing of the b-pillars when I mentioned it, though I think that would be over doing it for me on the outside, personal preference.
From what I understand, she doesn't just slap it in, since the manufacturing process isn't 100% perfect she usually have to fine-tune them before locking them in place. The blue is pretty accurate to the paint.
She doesn't recommend the red CF for the red/black interior, it overdoes it too much.
This should be done about the time I get my "other things" from canzoomer.
If you want I can aske her where she gets her stuff rom, mine is on order now.
#9
Mr. Blue Man
Join Date: Dec 2003
Location: Carmel, IN
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
#10
Not so Super right now
Join Date: May 2003
Location: Beyond that there swamp.
Posts: 1,493
Likes: 0
Received 0 Likes
on
0 Posts
Whealy: Ask them if they can send a brushed aluminum sample to ya. I have been toying with the idea of getting one for the past few weeks but want to see a better quality pic than those far back shots they have.
#12
Mr. Blue Man
Join Date: Dec 2003
Location: Carmel, IN
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Genom
Whealy: Ask them if they can send a brushed aluminum sample to ya. I have been toying with the idea of getting one for the past few weeks but want to see a better quality pic than those far back shots they have.
Whealy: Ask them if they can send a brushed aluminum sample to ya. I have been toying with the idea of getting one for the past few weeks but want to see a better quality pic than those far back shots they have.
Did you see this pic?
#13
Registered User
Join Date: Feb 2003
Location: South Florida
Posts: 1,080
Likes: 0
Received 0 Likes
on
0 Posts
How is the coverage on this CF overlay. At one point I was looking at kits for the FD and they all had issues. Around the edge you could see the original plastic, and around the shifter hole there was a huge gap, where the plastic was visible. That may have been due to some odd curve in the original material I suppose.
jds
jds
#17
Mr. Blue Man
Join Date: Dec 2003
Location: Carmel, IN
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Genom
No, I hadent. Hmm.... I'm still unsure if I want that or the titanium tone overlays. Damn decisions. Thanks WHealy.
No, I hadent. Hmm.... I'm still unsure if I want that or the titanium tone overlays. Damn decisions. Thanks WHealy.
#20
Forum Vendor
Join Date: Jan 2004
Location: iptmotorsports.com
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Healy Got his blue/black carbon kit today and installed it along with his blue/black pillars
pics here
https://www.rx8club.com/showthread.p...threadid=19095
parker
www.iptdashkits.com
pics here
https://www.rx8club.com/showthread.p...threadid=19095
parker
www.iptdashkits.com
#21
Registered User
Thread Starter
Join Date: Oct 2003
Location: Mobile, AL
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
Hmm, those b-pillars don't suit my taste. When I get pics of my CF developed I'll post them, about the same as Healy had done, with a slightly different touch. though the lite blue in his interior is, well......different to say the least.
#23
Registered
Join Date: Oct 2001
Location: Boulder County, Colorado
Posts: 7,966
Likes: 0
Received 4 Likes
on
3 Posts
Originally posted by Genom
No, I hadent. Hmm.... I'm still unsure if I want that or the titanium tone overlays. Damn decisions. Thanks WHealy.
No, I hadent. Hmm.... I'm still unsure if I want that or the titanium tone overlays. Damn decisions. Thanks WHealy.
#24
Registered User
Join Date: Mar 2004
Location: Houston, TX
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Trussville has replacement imitation CF parts for the door handles, Window switches and center console.. Unfortunately it appears the cost is what someone would expect to pay for real CF.
QSEA-64-32Z
QSEA-V1-200
QSEA-V1-440
Nat
QSEA-64-32Z
QSEA-V1-200
QSEA-V1-440
Nat
Thread
Thread Starter
Forum
Replies
Last Post
Jst4fun
RX-8 Parts For Sale/Wanted
9
03-05-2021 07:16 PM
nferguson88
RX-8 Parts For Sale/Wanted
1
10-06-2015 12:45 PM
Tgiolitto100
RX-8's For Sale/Wanted
1
09-29-2015 10:52 AM