When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
before I was getting around 275 rwp
I think i got my numbers wrong--recalculating for approx 325 crank HP(approx 275 at the wheels?) and max of 80% duty cycle and 55 psi fuel pressure I would need 2280 cc total flow.
If you want 275 at the wheels on a Pettit-equipped, 6-port RX-8, you want to see about 2400cc of total flow at the injectors.
Remember, you need to support the 35 HP or so it takes to run the blower at 9 PSI. Airflow will be in the 380 g/sec range.