Brett, are the tables numbered in MazdaEdit like they are in PT?

Not sure why no one else has taken the plunge here from the S2 perspective, but I would be willing to shell out the money. Would be far cheaper than snagging an adaptronic for basic tuning.

yes but not the same number for the same map :(

it sounds like at a minimum the maps aren't defined and we (or at least "I") currently don't know if the S2 maps are configured like the S1, which could potentially be a guessing the map game if they're not

That thought crossed my mind as I read his response.

I hear ya, i dont mind shelling out some money for the cause, just gunna take a week or two after v-day spending for the lady and tax return stuffs.

If this can help me tweak dwell times on the d585's to make the most out of them, it would be well worth it. (also would be sweet if we can find a way to mask pid's like the cobb does... morals aside).

as long as you understand that there's a possibility that you might not be able to decipher the maps. I would hope that most of them are obvious, just won't know until we dive in.

yup, understood, i dont mind biting the bullet ... better than sitting around praying to some magical gods that a magic tuning solution comes out of no where lol

hi guys
i've just bought mazdaedit, and the openport. (wish me luck)

does anyone have a log config .txt file for logging with the openport?

Am picking this up shortly. I understand I need the Tactrix Openport 2.0. Just wanted to check in with those currently using this, are there any adapters or anything else I need?

Team - saw your offer and since we are local to each other would be happy to accept any assistance.

Tactrix is all you need.

thewird

Aren't you a S2 owner?

I am a S2 owner.

^^ well this just got me excited.

I have been watching this thread, and the s2 thread for quite some time from the side lines. It's very interesting.

As some of you may recall, we have been able to reflash the first and second gen ecus, using the Piasini serial suite and files provided from Italy. While we were able to see some gains with that setup, I was not convinced that it was the idea way to do things, and did not pursue it.

So spring forward to now; first, we tune almost all the Mazdas, from the MX5 to the DISI in the Mazdaspeed 3, and we are the official calibrator for the MX5 playboy cup race series. I say most, because I do not specialize in rotaries, I have done a few over the years as we are a Cobb ProTuner shop also.

How does this effect you guys; well we have had MazdaEdit here in the shop for quite a while, and yes it's a pro version. I would be more than happy to satisfy everyone's curiosity about the gen 2, if you like.

I will tell you this ahead of time; the gen two ecu is exactly the same hardware the NC2 MX 5 uses, and we have had a great deal of success with them. So I know it will read and write the ROM. It's simply a matter of defining the tables. Epifan has quite a few of the calibration files with some of the tables defined, and finding the rest are not that difficult, if you know what to look for.

So here is my suggestion; if anyone, or multiple anyones would like to swing by the shop one day, I will be happy to dump the ROM image, and look thru the bin. I could then make a clone of the original ecu( yes we do that on the IMMO cars), and flash something so you guys would know if it works.

Feel free to ring me at the shop if anyone is interested

678.488.1011

Well there's a great opportunity. New Braunfels is quite the drive, but will schedule something with them.

New Braunfels is right up the street from us, I will point tbk (R3 owner) to this thread.

Is that your car in the sig picture? If so I think we saw you out at H2R for the CorkSport meet in Nov?

Yes sir, I was the one misfiring all over the dyno, :lol:

saw that! Not a good day for you that day! We had our little project MazdaSpeed 2 out there that day

Yeah, boost leaks had/have me running in the 10.0's AFR wise which was causing spark blow out. It's better now than it was, I found one small leak but I think I still have a leak somewhere since it is still running really rich. I am building a real boost leak tester this weekend to find out for sure so hopefully we get it sorted and get the tune dialed in correctly this weekend.

That Mazda 2 was really clean.

Yeah leaks are the biggest pain in the ass. We use smoke for most intake leak detection. And why I prefer speed density for boosted cars.

If ya can't find the leak, drop by and I'll smoke it for you

Smoke huh? never thought of that.

Saturday morning my MT 2009 GT will be at Dynotronics being read by MazdaEdit. They will take a look at the data then we will schedule a write.

Awesome.