AccessPort, Hymee Tuner Pro or something else?
#26
Registered
Thread Starter
Join Date: Jan 2002
Location: Czech Republic
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Searching thru threads, reading AP manual and looking to AP Manager software i have not found way to raise idle (besides getting already made map with raised idle from you or somewhere else).
Is that correct? Or can i use AP Tuner Race for that?
Is that correct? Or can i use AP Tuner Race for that?
#33
Registered
Thread Starter
Join Date: Jan 2002
Location: Czech Republic
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
#34
mazdaEdit (ecuEdit) is software with universal Logger, LogViewer, MapEditor. Software have open XML-defs structure, so customer can create map defs and logger defs by your own using built-in defs editors. mazdaEdit have implemented RX8 and other CAN-bus mazdas protocols for logging and flashing. Also map description package included to software pack for quick start. Description of RX-8 ECU contains more than 500 3d and 2d maps with proper Axises. Purpose of most of them is unknown... But, Ignition, Fuel, MAF, Throttle, Idle and etc is known.
Last edited by epifan; 06-28-2010 at 04:06 AM.
#35
Registered
Thread Starter
Join Date: Jan 2002
Location: Czech Republic
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
mazdaEdit (ecuEdit) is software with universal Logger, LogViewer, MapEditor. Software have open XML-defs structure, so customer can create map defs and logger defs by your own using built-in defs editors. mazdaEdit have implemented RX8 and other CAN-bus mazdas protocols for logging and flashing. Also map description package included to software pack for quick start.
Pro version (VIN policy? price?)
Hardware supplied? If not, which is supported?
#38
#39
Banned
iTrader: (3)
Didn't we already have a discussion about the EpiEdit software a few months back?
{edit} - I know I've had a discussion about this package before, but I can't quite put my finger on it.
Anyway, according to your site, the RX-8 version still isn't available, and the software is "read-only", anyway. I'm not sure what you are getting at with this offering.
{edit} - I know I've had a discussion about this package before, but I can't quite put my finger on it.
Anyway, according to your site, the RX-8 version still isn't available, and the software is "read-only", anyway. I'm not sure what you are getting at with this offering.
Last edited by MazdaManiac; 06-28-2010 at 10:52 AM.
#40
For EU guys (Like me) there is no other option (that I know about) then Hymee ProTuner that lets you do what you want. sort off atleast.
Let your customer buy Scantool or a scantool+protuner brick depending on what they want.
Selling tunes via a Token VIN basis will probably spell disaster in the long run, easier to help your customer if they can logg and send you the loggs (your customer dont need to show up at your shop all the time)
Let your customer buy Scantool or a scantool+protuner brick depending on what they want.
Selling tunes via a Token VIN basis will probably spell disaster in the long run, easier to help your customer if they can logg and send you the loggs (your customer dont need to show up at your shop all the time)
#42
I'll release version with RX8 flash support at this week. Currently, I'm in direct testing software with rx8 owner. And we haven't any problems with disabling DTC, changing limiters and logging. At a next day we are start to tune fuel and ignition.
#43
This is not necessarily a downside though, Cobb is unknowingly saving a lot of engines given the average user's capabilities here.
#44
#46
Trained true Killers
highly interested in mazdaEdit (ecuEdit) software. will it work with my elm 327interface that i use on my laptop
Last edited by the1jesster; 06-28-2010 at 03:23 PM.
#47
Registered
Thread Starter
Join Date: Jan 2002
Location: Czech Republic
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
#49
Registered
iTrader: (25)
Race gives you the Pro tuning tools, but it was only provided for the US market. You'll need Pro for any significant JDM & Euro tuning as previously stated.
Pro is $1500. Neither Hymee or Cobb can access an original/unknown ROM.
Pro is $1500. Neither Hymee or Cobb can access an original/unknown ROM.
Last edited by TeamRX8; 06-29-2010 at 07:26 AM.
#50
If you see a big market going with AccessTUNER PRO and Cobb will be an excellent solution.
If you only are going to have a few customers now and then go with the Hymee Pro Tuner.
If you only want to scan for CELs go with a Scantool.
ecuEdit maybe interesting but I wouldnt go down the road ones more with an untested software.
Just my 2 cents..
If you only are going to have a few customers now and then go with the Hymee Pro Tuner.
If you only want to scan for CELs go with a Scantool.
ecuEdit maybe interesting but I wouldnt go down the road ones more with an untested software.
Just my 2 cents..