Notices
Series I Aftermarket Performance Modifications Discussion of power adding modifications

RC engineering fuel injector findings

Thread Tools
 
Rate Thread
 
Old Feb 6, 2008 | 06:45 PM
  #1  
olddragger's Avatar
Thread Starter
Registered
iTrader: (3)
 
Joined: Apr 2004
Posts: 10,828
Likes: 40
From: macon, georgia
RC engineering fuel injector findings

Just got my injectors back from the above.
i have 52K on these babys. here are the findings
yellows
before cleaning--cc's/min flow patter
1-- 403 dripping
2 - 416 good
3 - 413 good
4 - 409 good
after cleaning
1 - 419 excellent
2 - 421 excellent
3 - 420 excellent
4 - 420 excellent
reds
before cleaning
1 - 331 good
2 - 317 poor
after cleaning
1- 336 excellent
2 -334 excellent

thoughts?
olddragger
Reply
Old Feb 6, 2008 | 08:01 PM
  #2  
Brettus's Avatar
Boosted Kiwi
iTrader: (2)
 
Joined: Apr 2006
Posts: 20,853
Likes: 1,806
From: Y-cat-o NZ
thoughts ? well the words good and excellent come to mind - dripping , not so much .... heh

Last edited by Brettus; Feb 6, 2008 at 08:04 PM.
Reply
Old Feb 6, 2008 | 09:06 PM
  #3  
RotaryPhil's Avatar
Registered
 
Joined: Aug 2003
Posts: 34
Likes: 0
From: Montreal (Qc) Canada
OR,
Have they been reisntalled? If so, any "noticeable" differences from before?
Phil
Reply
Old Feb 6, 2008 | 09:09 PM
  #4  
olddragger's Avatar
Thread Starter
Registered
iTrader: (3)
 
Joined: Apr 2004
Posts: 10,828
Likes: 40
From: macon, georgia
Nope--not installed yet--a fresher engine is going in --about 1 1/2 to 2 wks out--injectors, wide band(Innovate), Ignition solution and the double resonated midpipe will all be added to my package.
od
Reply
Old Feb 6, 2008 | 09:10 PM
  #5  
olddragger's Avatar
Thread Starter
Registered
iTrader: (3)
 
Joined: Apr 2004
Posts: 10,828
Likes: 40
From: macon, georgia
Oh forgot--dang--water meth system if i can get away with stealing the coffee fund at work. Ray I will PM ya
OD
Reply
Old Feb 7, 2008 | 09:44 AM
  #6  
CnnmnSchnpps's Avatar
No means yes
iTrader: (1)
 
Joined: Nov 2006
Posts: 1,507
Likes: 0
From: Jersey City NJ
dripping?? that sounds nasty...
Reply
Old Feb 7, 2008 | 01:33 PM
  #7  
Jax_RX8's Avatar
Got Another Rotary
 
Joined: Aug 2006
Posts: 608
Likes: 2
From: Fredericksburg, VA
thoughts? Ongoing use of a great fuel cleaner lube (FP Plus) might have prevented this need.

It is a lot easier and cheaper to keep these injectors lubed and clean all the time rather than to have to pull them and have them professionally cleaned/flushed at some point.
Reply
Old Feb 7, 2008 | 01:46 PM
  #8  
CnnmnSchnpps's Avatar
No means yes
iTrader: (1)
 
Joined: Nov 2006
Posts: 1,507
Likes: 0
From: Jersey City NJ
curious - how much does this service cost?
Reply
Old Feb 7, 2008 | 10:32 PM
  #9  
SolarYellow510's Avatar
Registered User
 
Joined: Jul 2007
Posts: 205
Likes: 0
Originally Posted by olddragger
a fresher engine is going in -- od
Is there another thread where I can learn more about that situation? You're recently forced-inducted, right?
Reply
Old Feb 8, 2008 | 10:10 AM
  #10  
Red Devil's Avatar
Registered User
 
Joined: Jun 2002
Posts: 3,086
Likes: 1
From: Misinformation Director - Evolv Chicago
Originally Posted by olddragger
Nope--not installed yet--a fresher engine is going in --about 1 1/2 to 2 wks out--injectors, wide band(Innovate), Ignition solution and the double resonated midpipe will all be added to my package.
od
What's the issue with the current one?
Reply
Old Feb 8, 2008 | 11:28 AM
  #11  
Jax_RX8's Avatar
Got Another Rotary
 
Joined: Aug 2006
Posts: 608
Likes: 2
From: Fredericksburg, VA
Originally Posted by Red Devil
What's the issue with the current one?
It's Stale
Reply
Old Feb 9, 2008 | 07:45 PM
  #12  
olddragger's Avatar
Thread Starter
Registered
iTrader: (3)
 
Joined: Apr 2004
Posts: 10,828
Likes: 40
From: macon, georgia
old like me
olddragger
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Audio Concepts ATL
New Member Forum
21
Sep 26, 2021 01:59 PM
vapor2
West For Sale/Wanted
11
Nov 3, 2020 03:38 PM
Pelleilee
New Member Forum
6
Sep 29, 2019 10:07 AM
marc2820
New Member Forum
6
Jul 26, 2015 10:47 PM
dbarber
Series I Trouble Shooting
14
Jul 25, 2015 01:34 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 11:38 PM.