New mazdaspeed CAI!!!!!
#51
Registered User
Join Date: Nov 2003
Location: in the moment
Posts: 603
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FLybOi drE
i guess you didnt bother reading the bottom sentense of the advertisement...emissions legal to all 50states xP
besides, mazda wont void warrantly for any genuine mazda or mazdaspeed parts
besides, mazda wont void warrantly for any genuine mazda or mazdaspeed parts
Guess you missed my sarcasm...
#52
Originally Posted by DARKMAZ8
too bad that was then this is now. RB has nothing to do with the current mazda models. ie. ms6,ms miata.......rb is just a joe shmoe type company that makes specialized products for certain cars. They make products for old men to enjoy.
AND
RB did aid in the concept race prepped miata that made a US tour
so boo!
#54
No respecter of malarkey
iTrader: (25)
K&N makes a wide variety replacement filters with an internal molded velocity stack inlet (much larger OD than the pipe inlet) and even extra filter capacity on the cone end, if I got the MS one I'd probably swap that cone off for one of those instead
RX-4950 Product Specifications
Product Style: Round Tapered Universal Air Filter
Base Outside Diameter: 6 in (152 mm)
Flange Inside Diameter: 2.5 in (64 mm)
Flange Length: 2 in (51 mm)
Flange Type: Centered
Height: 5.5 in (140 mm)
Top Outside Diameter: 5 in (127 mm)
Top Style: X-Stream
Top Material/Finish: None
Filter Re-Oiling Amount: 0.96 oz (28 ml)
Footnote 1: Filter has molded-in velocity stack
Weight: 1.5 lb (0.7 kg)
Product Box Length: 6.88 in (175 mm)
Product Box Width: 6.88 in (175 mm)
Product Box Height: 7.88 in (200 mm)
RX-4950 Product Specifications
Product Style: Round Tapered Universal Air Filter
Base Outside Diameter: 6 in (152 mm)
Flange Inside Diameter: 2.5 in (64 mm)
Flange Length: 2 in (51 mm)
Flange Type: Centered
Height: 5.5 in (140 mm)
Top Outside Diameter: 5 in (127 mm)
Top Style: X-Stream
Top Material/Finish: None
Filter Re-Oiling Amount: 0.96 oz (28 ml)
Footnote 1: Filter has molded-in velocity stack
Weight: 1.5 lb (0.7 kg)
Product Box Length: 6.88 in (175 mm)
Product Box Width: 6.88 in (175 mm)
Product Box Height: 7.88 in (200 mm)
Last edited by TeamRX8; 11-16-2005 at 07:11 PM.
#55
"Call me Darkman"
Thread Starter
Join Date: Aug 2004
Location: Toronto/Florida
Posts: 2,034
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TeamRX8
K&N makes a wide variety replacement filters with an internal molded velocity stack inlet (much larger OD than the pipe inlet) and even extra filter capacity on the cone end, if I got the MS one I'd probably swap that cone off for one of those instead
RX-4950 Product Specifications
Product Style: Round Tapered Universal Air Filter
Base Outside Diameter: 6 in (152 mm)
Flange Inside Diameter: 2.5 in (64 mm)
Flange Length: 2 in (51 mm)
Flange Type: Centered
Height: 5.5 in (140 mm)
Top Outside Diameter: 5 in (127 mm)
Top Style: X-Stream
Top Material/Finish: None
Filter Re-Oiling Amount: 0.96 oz (28 ml)
Footnote 1: Filter has molded-in velocity stack
Weight: 1.5 lb (0.7 kg)
Product Box Length: 6.88 in (175 mm)
Product Box Width: 6.88 in (175 mm)
Product Box Height: 7.88 in (200 mm)
RX-4950 Product Specifications
Product Style: Round Tapered Universal Air Filter
Base Outside Diameter: 6 in (152 mm)
Flange Inside Diameter: 2.5 in (64 mm)
Flange Length: 2 in (51 mm)
Flange Type: Centered
Height: 5.5 in (140 mm)
Top Outside Diameter: 5 in (127 mm)
Top Style: X-Stream
Top Material/Finish: None
Filter Re-Oiling Amount: 0.96 oz (28 ml)
Footnote 1: Filter has molded-in velocity stack
Weight: 1.5 lb (0.7 kg)
Product Box Length: 6.88 in (175 mm)
Product Box Width: 6.88 in (175 mm)
Product Box Height: 7.88 in (200 mm)
that is exactly what I'd get too.
#56
"Call me Darkman"
Thread Starter
Join Date: Aug 2004
Location: Toronto/Florida
Posts: 2,034
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by r0tor
why would Mazdaspeed want to copy RB's design when RB's design is not really anything more then a stock box with a conical filter in it and no baffles for noise??
#58
Registered
Originally Posted by r0tor
why would Mazdaspeed want to copy RB's design when RB's design is not really anything more then a stock box with a conical filter in it and no baffles for noise??
#59
No respecter of malarkey
iTrader: (25)
Originally Posted by dmp
...another thing I don't get..how is that installed? Looks as if the filter element would be sticking up thru the hood.
it probably needs to be turned at the the rubber joint, they probably just turned it for a clear photo of what it is, looks to me like if you rotated the front section at the rubber joint it would it would go down and then turn the filter horizontally aross the front of the car
#63
The Professor
Originally Posted by DARKMAZ8
Actually if you take off the engine cover this intake will flow nicely. The engine cover is cosmetic and actually holds hot air around the motor when you turn the car off.
#64
Originally Posted by TeamRX8
fix your browser settings, there's nothing wrong with the avatar, some browsers block it as a popup for some reason, Firefox is one
the pic was uploaded off my computer onto this site, it's not a link
the pic was uploaded off my computer onto this site, it's not a link
no need for gif since it isn't an animated icon
give this one a try
#66
No respecter of malarkey
iTrader: (25)
Originally Posted by truemagellen
here u go bud, I converted it to a usable format...I believe it was encoded with the older gif non-interlaced formatting so it would not show in many browsers
no need for gif since it isn't an animated icon
give this one a try
no need for gif since it isn't an animated icon
give this one a try
whatever you say partner, here goes
#67
No respecter of malarkey
iTrader: (25)
Originally Posted by staticlag
I think you are all silly billies for getting lured into this.
I highly doubt that intake pictured would fit into a stock rx8, the piping is all wrong.
I highly doubt that intake pictured would fit into a stock rx8, the piping is all wrong.
try again Billie, that picture is out of the new 2006 Mazdaspeed catalog
Last edited by TeamRX8; 11-16-2005 at 11:45 PM.
#68
The Professor
Originally Posted by TeamRX8
try again Billie, that picture is out of the new 2006 Mazdaspeed catalog
Feel free to practice by yourself, and in time you can show us what your really made of
In front of mirrors helps.
#69
No respecter of malarkey
iTrader: (25)
Originally Posted by staticlag
Naw, dude, when your trying to mock someone your supposed to say it like this: "BILLAY!"
Feel free to practice by yourself, and in time you can show us what your really made of
In front of mirrors helps.
Feel free to practice by yourself, and in time you can show us what your really made of
In front of mirrors helps.
why would I feel the need to improve my mad mocking skillz with you, you're doing a great job all by yourself
btw, just in case you didn't see where this all began
https://www.rx8club.com/showthread.p...9&page=1&pp=15
.
Last edited by TeamRX8; 11-16-2005 at 11:59 PM.