longpath

iTrader: (1)

Assuming that BHR does bring their header to market and I am willing to source an HJS cat to go with it, which one is the best fit?

Please bear in mind that I can neither read nor speak German and trying to find my way through their page with very little success.

http://www.hjs-motorsport.de/de/3/71...lysatoren.html

TeamRX8

iTrader: (25)

http://www.hjsna.com/categories/Moto...-100-C.P.S.I./

Chad D.

iTrader: (19)

How's that BHR header going? I have been putting off getting a custom long header until this is released. I have some bhr stuff and it's quality. I haven't installed the resonator yet though (cause I am waiting for development on this).

longpath

iTrader: (1)

Thanks!!!

Would this be the one:

9095 0044 (Up to 3.0L / 300HP - 6.0L / 600HP)?

TeamRX8

iTrader: (25)

I would recommend the PE model for a rotary engine, it is the one I first used back in 2006 and it also has 3" in/out connections

http://www.hjsna.com/categories/Moto...7%7D-640HP%29/

I went with the 400 hp model this time, it had just come out when I bought it, it is a big high flowing ****, overkilll for NA but I wanted the absolute least restriction and also figured to leave it in place if I ever move on to FI ...

TeamRX8

iTrader: (25)

and unless you're racing then you might want to consider these 200 cpi units for street use instead, though they are new to me they appear to be designed with long term emissions durability in mind, even at 200 cpi the area is so much larger than the Davesport cat that they likely flow close to the same

http://www.hjsna.com/categories/HD-C...B47%7D-EURO-5/

http://www.hjsna.com/pages/New-Coating.html

http://www.hjsna.com/pages/Reduction-of-Emissions.html



.

longpath

iTrader: (1)

In your opinion and with your familiarity with their products, would you say the 200 cpi units would be compatible with occasional track use?

i3oots

Thought I'd just add on to this instead of creating a new thread but I was thinking about getting this header. http://cgi.ebay.com/ebaymotors/03-10...Q5fAccessories I haven't done anything to my 8 yet and was wondering what I would need if I just installed a header? Some people on this thread were saying a custom midpipe would be needed for that BHR header they were talking about but does that apply to any header? I just don't wanna order this header and come to find out I was suppose to get a custom midpipe or flux capacitor installed along with the header lol.

RotaryMachineRx

iTrader: (1)

To answer your question, no that is a direct bolt on.

Ebay Header.....


Look here------> http://www.racingbeat.com/RX8/Exhaust-Headers.html

i3oots

LOL ok sweet I just didn't want to mess anything up with the engine or exhaust by only installing headers for now.

Aaron B

Sorry to bring up an old thread, but, if that picture IS at all accurate, it appears that the collector is after the bend that would follow the cat in the stock (or BHR) midpipe. If that is the case, then it seems that a catted midpipe following that header would have the cat most likely moved too far down stream to be legal for SCCA's STX class.

Would anyone familiar with the prototype be able to comment in regards to this?

pdxhak

iTrader: (2)

The picture is 100% accurate and represents exactly where BHR was at that moment in time with the header. However if they made any changes to the header design then the picture does not represent the current model.

ReV2ReD

Has this thing come to fruition yet?

EricB

iTrader: (7)

Wouldnt it be more cost efficient to make the header longer so that it attaches to a catback and not require a midpipe between the header and catback.

sure it would be loud, but if you are spending that much $ to buy a header for barely any hp... just deal with the noise.

longpath

iTrader: (1)

I WANT a catalytic converter in my exhaust as long as I can't get the exhaust emissions levels I want without one.

olddragger

iTrader: (3)

does anyone make a better log type manifold?

Beodude

iTrader: (3)

I could be wrong, but I'm pretty sure a long header can actually add some power compared to anything else. I'm really excited to see this come to light! I don't want to get a header until it's a BHR one.

Easy_E1

iTrader: (2)

That's placing the inlet of the cat "6 inches" from the back (outlet) of the stock converter.

Let us do some measuring.

Aaron B

If you guys can meet that, it will make you quite popular with the STX crowd

ReV2ReD

So, it was being test fitted in June 2011, but were now in June 2012. I understand people want a midpipe and a cat, but does the header actually fit and work?

Easy_E1

iTrader: (2)

Sometimes due to other projects and customers and the company growing we sometimes get a little behind with our upcoming products. This doesn't mean they have been forgotten, it just means that something else in the company is taking priority at the moment.
Believe me there is no one else that want's these new products out as fast as BHR does. But to make quality, functional and reliable parts that live up to our standards, it can take time.
We have put a lot of time, energy and money into each one of our offerings. And we will not compromise our integrity or reputation by offering inferior or unproven products.

The header is very close to being done and put into production. It really is just a matter of a few more weeks. Then we will begin testing of the finished product. Yes the header will fit. And yes the header will work. But we want it to work better than any other header offering out there. Don't you? Making the best product is not an easy or instant process.

olddragger

iTrader: (3)

thanks for the update Easy. Priorities are priorities.
If I could inquire? Can you reveal the size of the primary runners? If not I certainly understand.
thanks

Easy_E1

iTrader: (2)

Thanks OD. I'll let Charles divulge that info.

TeamRX8

iTrader: (25)

PT Barnum would already have already built it ...

Easy_E1

iTrader: (2)

Well good thing he's not. Cause he would have made it like an elephant trunk.
And if he raced like you he would have won something by now. And I bet he doesn't use zipties to hold his ignition coils in either.
So pedal your sarcasm somewhere else TeamRXfail. Your not making any brownie points here.