drag racing
#26
im not focusing on the intake. no where in this thread did i mention the intake port... i already did my exhaust on two different plates two different ways. both styles i did seem to be a big improvement, but havnt been ran yet, so who knows? i wouldnt call either road worthy.
#29
your whole statement makes me laugh. not lol... but actually laugh.
Last edited by sen2two; 10-06-2009 at 11:21 PM.
#30
Registered
Join Date: Oct 2008
Location: Montreal,QC
Posts: 2,256
Likes: 0
Received 0 Likes
on
0 Posts
lol.
Why do you guys care? People still drag race their 16 second hondas. Why don't you get it, people do this for fun and see how fast it is. It's just a different way of going fast and timing your own car.
BTW, I actually want to see how this turns out.
Why do you guys care? People still drag race their 16 second hondas. Why don't you get it, people do this for fun and see how fast it is. It's just a different way of going fast and timing your own car.
BTW, I actually want to see how this turns out.
#31
RX8 & RX7 owner
Last edited by ZumnRx8; 10-07-2009 at 11:33 PM.
#32
you took what i said wrong. there is no way to label a car a "drift car". anything with rear tires spinning can slide. but no car from the factory is designed as a drag, road race, drift, ect... theres rx7's that run rally. rod millen. yes super ausie drifters father...
calm down. no ones attacking the rx8. its all rotary love.
calm down. no ones attacking the rx8. its all rotary love.
#33
RX8 & RX7 owner
^+1.... Good Luck in what you are doing... and I wasnt taking anything the wrong way.... i didnt take your comment as an attack the RX8- I just didnt really know if you knew that there was DRIFTING RX8's or not... because it seems to me that you came from the RX7club.com forum... and many there hate the RX8.... Ive seen such "hate" at SEVENSTOCK this year... in IRVINE, CA from the SEVEN guys... but once again GOOD LUCK!
#34
NO A/C :(
Join Date: Jul 2009
Location: Silver Spring, MD
Posts: 656
Likes: 0
Received 0 Likes
on
0 Posts
^true...... I think the renesis should do fine if not better in this body, hmm I GUESS I have to wait to see the finish product but like I mentioned before, the 4 port renesis, IMO, is capable of producing HP #'s up to 275-305. Hope everything goes well.
#35
after experimenting on the 4 port plate to the point where its unusable. I now believe i can make more power with the 4 port. I just had to destroy one to find that out...lol
#39
I knew this guy that worked as an assitant in a rotary shop here in Orlando. He did a lot of porting on motorcycle heads too. He would buy heads and then cut them in half at the runners to see how much room there is to port. i kinda did the same, without cutting it in half part...
#41
No respecter of malarkey
iTrader: (25)
you're wasting time and money trying to use thermosteel putty in the exhaust ports
http://hydraraptor.blogspot.com/2008...-steel-my.html
http://hydraraptor.blogspot.com/2008...-steel-my.html
#42
thanks for the tip, but i wasnt going to use that in this motor. that was for an old 13b with per. exhaust ports.
but i already scrapped that plan to shape a exhaust sleeve area with getting a sleeve machined from aluminum.
but i already scrapped that plan to shape a exhaust sleeve area with getting a sleeve machined from aluminum.
Last edited by sen2two; 10-18-2009 at 04:36 AM.
#44
Black on black on black..
Join Date: Mar 2008
Location: Pompano Beach, FL
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
i ran my 8 with i/h/e and 55 shot of nitrous at 14.16 with a bad launch and holding 3rd gear too long... http://www.youtube.com/watch?v=KRjd1BC7q7o
will go back and easily get 13's with a new clutch. fastest i went down the track bone stock was 14.86
will go back and easily get 13's with a new clutch. fastest i went down the track bone stock was 14.86
#47
Rice Police
Join Date: Nov 2006
Location: California
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
^+1.... Good Luck in what you are doing... and I wasnt taking anything the wrong way.... i didnt take your comment as an attack the RX8- I just didnt really know if you knew that there was DRIFTING RX8's or not... because it seems to me that you came from the RX7club.com forum... and many there hate the RX8.... Ive seen such "hate" at SEVENSTOCK this year... in IRVINE, CA from the SEVEN guys... but once again GOOD LUCK!
#50
Rotary Power!
iTrader: (1)
Join Date: Feb 2009
Location: Houston, TX
Posts: 709
Likes: 0
Received 0 Likes
on
0 Posts
interesting project. putting a renesis into an rx7 i bet the seven guys are all like "its blasphemy!!!" Kinda reminds me of Romeo and Juliet, 2 families one marriage of engine and chassis will join both families together .... but then again that story didn't end well. Good luck looking forward to the result.