Notices
Series I Aftermarket Performance Modifications Discussion of power adding modifications

CZ 1.1 performance and other mods

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 04-23-2005, 04:18 PM
  #26  
Bigus Rotus
iTrader: (3)
 
Nemesis8's Avatar
 
Join Date: Jun 2004
Location: Missouri
Posts: 8,573
Likes: 0
Received 1 Like on 1 Post
That's where mine is currently - North of the border. I'm having the ignition circuit corrected. This sounds like the untuned - incorrect ignition scenario.
Old 04-23-2005, 04:28 PM
  #27  
Registered User
 
mcpheeg's Avatar
 
Join Date: Jun 2004
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
It is a bit much to keep sending it back and forth, the only person who can fix the issue is in canada and I am in Scotland. Do you know that i'll probably be hit for tax everytime the thing is shipped back and forth.
Old 04-23-2005, 04:54 PM
  #28  
Banned
 
jaehyun127's Avatar
 
Join Date: Apr 2004
Location: New York
Posts: 299
Likes: 0
Received 0 Likes on 0 Posts
there's no tax if you write customs off saying it's a "gift."

then they can't tax you or charge you... from what i hear.

i currently bought a cz1.1 with 2.0 map from OD- so i'll post the results here... Butt dyno of course~!
Old 04-23-2005, 07:43 PM
  #29  
Consiglieri
 
MadDog's Avatar
 
Join Date: Feb 2004
Location: yourI'mgirl
Posts: 1,275
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by mcpheeg
It is a bit much to keep sending it back and forth, the only person who can fix the issue is in canada and I am in Scotland. Do you know that i'll probably be hit for tax everytime the thing is shipped back and forth.

PLAN B:

Find a kindred spirit in the UK who has a CanScan (or a CZ that you can temporaily install) and wants to get together for a few snorts of Jameson (or one of the "Glens") complements of you. You can talk shop and do a little investigative work, too. That'd be one way to see if you really need to send it back across the pond.

-MD
Old 04-23-2005, 10:04 PM
  #30  
Registered User
 
mcpheeg's Avatar
 
Join Date: Jun 2004
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
I have everything needed to tune the damn thing. I got the stage 3 with the controller and everything.

The problem stems back to the 20hp loss even on a 0 map.

If the unit cannot mimic the stock ecu then how the hell am I meant to tune it. abosuletly no starting point.

Look at my dyno the two maps even look dissimilar. looks like two differnet engines.
Old 04-24-2005, 04:26 PM
  #31  
Registered
 
Bones's Avatar
 
Join Date: Feb 2004
Location: Seattle, WA
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
mcpheeg,

I had a similar problem when I first installed the Canzoomer. I had no power in lower revs, below 5,000 and it lugged like crazy. I couldn't outrun a Civic with it on. After I snipped the two capacitors the performance improved immediately. I have not dynoed the car, but I can now tell a positive difference with it on vs off.
Old 04-27-2005, 01:35 AM
  #32  
Registered User
 
mcpheeg's Avatar
 
Join Date: Jun 2004
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
Here goes everything

Well just to keep those interested few up-to-date.
I have just taken out the unichip which gave me an extra 7HP at max revs. I do have the dyno for this and will post it after I have done all the comparisons.
The canzoomer with the caps clipped off, "Ignition mod", has been reinstalled.
Instead of the original canzoomer map, I have used a map that was posted by prOber. This map is located in the canzoomer venders forum.
Hopefully, on Friday, using the same dyno, I will have a power run done on the car to see what it is producing.
This is fast becoming on of the most expensive mods that I have ever done to a car.
If the canzoomer can give me around 220HP at the flywheel I will have to call it a success.
If it can't well the results will be posted no matter what.
Just for the record the unichip dynoed at 227HP at the flywheel, bearing in mind the cat was removed and replaced with a decat pipe.
This time round, the header has been upgraded, a high flow cat will be used, a more free flowing air filter has been added.
Fingers crossed.
Hopefully this will prove once and for all if the unit works or not.
Any further suggestions will be greatly appreciated before I go for the run.
The map I am using can be seen here
He is boasting a 10-20HP gain with this map.
Old 04-27-2005, 12:18 PM
  #33  
Registered
iTrader: (1)
 
r0tor's Avatar
 
Join Date: May 2003
Location: PA
Posts: 3,754
Likes: 0
Received 0 Likes on 0 Posts
sweet
Old 04-27-2005, 12:21 PM
  #34  
Bigus Rotus
iTrader: (3)
 
Nemesis8's Avatar
 
Join Date: Jun 2004
Location: Missouri
Posts: 8,573
Likes: 0
Received 1 Like on 1 Post
Is that a Half-RPM map?
Old 04-27-2005, 12:23 PM
  #35  
Registered
iTrader: (1)
 
r0tor's Avatar
 
Join Date: May 2003
Location: PA
Posts: 3,754
Likes: 0
Received 0 Likes on 0 Posts
yup, half rpm... i should also mention i use that map with 89 octane gas

Last edited by pr0ber; 04-27-2005 at 12:27 PM.
Old 04-28-2005, 01:16 AM
  #36  
Registered User
 
mcpheeg's Avatar
 
Join Date: Jun 2004
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
Probers map

Well hit a small stumbling block already, the cars mil has came on. Don't know if this is due to probers map or not. Wondering PrOber have you had this problem with your map???
I am running 95 octane just for the record.
That is all I can get my hands on here in Scotland.
95 or 98 thats all we can get across here.
Car is definetly getting dynoed tomorrow morning booked in at 08:30 BST.
Watch this post for results.
May I just add that after running the car for about a day with the new ign mod and map installed, I was more pleased with this unit than before.
Will edit the post some time today to tell what errors have been thrown up. As long as I get the use of a laptop.
Old 04-28-2005, 06:34 AM
  #37  
Registered
iTrader: (1)
 
r0tor's Avatar
 
Join Date: May 2003
Location: PA
Posts: 3,754
Likes: 0
Received 0 Likes on 0 Posts
nope, never had a problem with the map in going on 9 months now...

and I think our octane ratings are different
Old 04-30-2005, 01:40 PM
  #38  
Registered User
 
mcpheeg's Avatar
 
Join Date: Jun 2004
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
Thread moving

To all who are interested in my input to this thread. I have decided to move this back into the canzoomers place. Please see UK spec Car with Canzoomer.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Hunterkelley24
Series I Engine Tuning Forum
14
06-14-2022 08:32 AM
TotalAutoPerformance
Vendor Classifieds
3
10-14-2015 12:29 PM
archon
RX-8 Parts For Sale/Wanted
3
10-01-2015 06:08 AM
jasonrxeight
RX-8's For Sale/Wanted
2
09-30-2015 01:53 PM
FubarI33t
New Member Forum
12
09-28-2015 08:45 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: CZ 1.1 performance and other mods



All times are GMT -5. The time now is 01:44 PM.