another AxialFlow shifter deal
#201
Installed mine today. Or tried anyway. Can't select reverse now
Followed the DYI, but not exactly a mechanic, so I spent some over an hour, most of the time getting the console off and the damn wire holders off the 10mm thingys :P Can probably do it in 10 now though, which is good since I'm gonna have to take it off. What do I do now though? I only tested it briefly when I had it all open, must have got 6th and thought I selected reverse. It fitted so snugly into the gearbox that I didn't even think that there'd be a problem.
Anyone know? If not I guess I'll search in older threads. Loved the feel of it.
Followed the DYI, but not exactly a mechanic, so I spent some over an hour, most of the time getting the console off and the damn wire holders off the 10mm thingys :P Can probably do it in 10 now though, which is good since I'm gonna have to take it off. What do I do now though? I only tested it briefly when I had it all open, must have got 6th and thought I selected reverse. It fitted so snugly into the gearbox that I didn't even think that there'd be a problem.
Anyone know? If not I guess I'll search in older threads. Loved the feel of it.
#203
Didn't give it a slap, but once I had started the car I tried to push it firmly down and over a few times. But it probably hits the lockout cover. Will have to take it up to see how much if that is the case. I mean, how hard would you do it compared to stock? Think I tried as firmly as I considered viable.
#204
I have an '09 shifter here that we are looking at. Problem being that we aren't sure how many more 8's they are going to make, Mazda isn't pushing them very hard, they just wanna sell 3's.
Who else is making them, I'd like to check them out.
I did get one and it was junk as you said.
The only way Mazda is going to make the 8 into a big seller is if they make it fast.
The only way to do that is to make the 1.8 engine.
With gas back down they should bring it out.
So they lose a mile to the gallon, who cares.
#205
If it will not go into reverse you need to dremel or even file a very small amount from the top of the lockout tab. You might even just have to put a small champher on the edge to get it started. Your car is one that is at the end of Mazda tolorence. We are only talking about .25mm or .010in. Maybe less. No need to force it, just get the clearance right.
Sorry your a little to far away for me to do it for you.
Let me know if you can't get it.
Sorry your a little to far away for me to do it for you.
Let me know if you can't get it.
#206
I wasn't expecting you to come over and fix it, no
Thanks for the tip though. I've got a dremel, however I'm not sure if the very basic attachments I got are able to do anything to metal. But I can try very careful and see. I take it you mean I should start on the upper part of the edge since you mention champher.
Thanks for the tip though. I've got a dremel, however I'm not sure if the very basic attachments I got are able to do anything to metal. But I can try very careful and see. I take it you mean I should start on the upper part of the edge since you mention champher.
#208
Administrator
iTrader: (7)
don't worry ferg, you should get it soon. Richard is awesome with his shipping and it'll definitely be worth the wait
#209
I wasn't expecting you to come over and fix it, no
Thanks for the tip though. I've got a dremel, however I'm not sure if the very basic attachments I got are able to do anything to metal. But I can try very careful and see. I take it you mean I should start on the upper part of the edge since you mention champher.
Thanks for the tip though. I've got a dremel, however I'm not sure if the very basic attachments I got are able to do anything to metal. But I can try very careful and see. I take it you mean I should start on the upper part of the edge since you mention champher.
Ferg, well then I guess you will get it tomorrow. They say 2-3 days, but not a sure thing.
#211
Registered
this is what i was looking at
http://www.miatamania.com/Shop/ViewP...eIndexID=59694
the complaint from the MX-5 people is that it goes into reverse due to a weak spring.
the other way to go is with japanparts.com about $450. i believe that is a mazda speed shifter.
i would pay that i if i had to.
i know it has to be viable businesses option for you
the complaint from the MX-5 people is that it goes into reverse due to a weak spring.
the other way to go is with japanparts.com about $450. i believe that is a mazda speed shifter.
i would pay that i if i had to.
i know it has to be viable businesses option for you
#212
I don't buy Kool-Aid
I find my self doing the same thing as StealthTL, kinda odd but sometimes i put it in 6th. I realize this as a tap the gas and dont move back but roll foward lol no big deal however i sometimes find it real eazy to put in reverse. Odd yea? at anyreate i'm happy with it
#213
I don't like that the reverse is where the 6th gear is at all to be honest. Prefer the VW way where it was lift up and upper left (1st gear spot). As whenever you go into first gear you are standing still anyway.
Kinda afraid to push down by mistake and get reverse when going for 6th
Hope my problem is easy to fix though, gonna pull out the trusted dremel tomorrow
Kinda afraid to push down by mistake and get reverse when going for 6th
Hope my problem is easy to fix though, gonna pull out the trusted dremel tomorrow
#214
Registered User
i get the samething when i try to reverse, i have to give it a little gas and hold down the cluch and it rolls right in to it. i dont mind, and i never use the 6th gear anyways , 5th is only highway
#215
I don't buy Kool-Aid
^Same here.
Hey neXib, there was a thread back in 2003 (cant belive i been on here that long lol) about how you can be driving on the free way and put the car in 6th and some kind of safty thing IDK seach it and check it out it was a good read
-Gil
Hey neXib, there was a thread back in 2003 (cant belive i been on here that long lol) about how you can be driving on the free way and put the car in 6th and some kind of safty thing IDK seach it and check it out it was a good read
-Gil
#216
Registered User
Join Date: Feb 2006
Location: Central California
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
#217
Thanks for the quick tips RP.
Did it today, took it all up really quick the second time, and dremelled just a bit of the edge, now I can slam it into reverse, have to be firm, but that's just good.
Loving the short-shifter like everyone else. Much more confident on 1st to 2nd especially
Did it today, took it all up really quick the second time, and dremelled just a bit of the edge, now I can slam it into reverse, have to be firm, but that's just good.
Loving the short-shifter like everyone else. Much more confident on 1st to 2nd especially
#219
Super-impreza!
iTrader: (-1)
Join Date: Dec 2007
Location: SoCal/NY
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
You're not falling for anything, and I get my feelings hurt easy.
But I'm still going to sell you one and ship it today.
You can't "fall for it" because there is a 30 day return policy.
On top of that there are only 2 left right now and there will be people soon that
will fight you for it.
We are getting material in on Monday to start a new batch but it takes time to machine all the parts.
But I'm still going to sell you one and ship it today.
You can't "fall for it" because there is a 30 day return policy.
On top of that there are only 2 left right now and there will be people soon that
will fight you for it.
We are getting material in on Monday to start a new batch but it takes time to machine all the parts.
#221
Got it on Friday and installed it over the weekend. My first self-performed mod and I learned a lot about my car, like how it's easy for little pieces to fall into cracks and make you spend an extended amount of time trying to fish it out.
The actual short shifter itself is awesome. All RX8's should have this out of the factory. WOW!
The actual short shifter itself is awesome. All RX8's should have this out of the factory. WOW!
#223
Registered User
now it feels normal, they need to make a really quick shifter lol j/k, this is perfect.. 1st to 2nd gear is really fast now, took alot longer before and theres no play in the shifter