{ FS } GT35R Turbo Kit
#1
Fire-Spewing Maniac
Thread Starter
Join Date: Sep 2004
Location: Toronto, Canada
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
GT35R Turbo Kit
Hey guys!
Im selling my RX-8, so I have decided to part out my turbo kit.
Kit includes
Garrett GT35R Turbo W/ Anti-Surge ported compressor housing AND Spare original compressor housing.
V-Band 2 piece downpipe & manifold (all triple ceramic coated)
TiAL 38mm Wastegate
HKS SSQ Limited Edition BOV
Turbosmart Boost controller
PWR Intercooler
All plumbing and couplers required
Autometer Boost Gauge
Innovate WideBand O2 Sensor & AFR Gauge
Racing Beat Oil filter sandwich plate, & coolant T's
New Rad hose
Interceptor-X (Microtech) ECU w/ remote ECU commander
4 650cc Fuel Injectors
255 lb/min fuel Pump
GReddy Oil catch Can
All gaskets & Hardware Needed.
This is truly a plug and play kit, you can install it in a day (I did it in 6 hours), and have the car running by the night. Makes the car a totally different experience. Tons of low and mid range torque, so much more fun to drive.
Kit only has 4k on it.
Im asking 5000 OBO.
I have a bunch of pictures on the kijiji posting
http://toronto.kijiji.ca/c-ViewAd?Ad...424;50506213;;
If you have any questions, just contact me!
P.S
the best way to contact me is my e-mail.
bindon.bryan@gmail.com
Im selling my RX-8, so I have decided to part out my turbo kit.
Kit includes
Garrett GT35R Turbo W/ Anti-Surge ported compressor housing AND Spare original compressor housing.
V-Band 2 piece downpipe & manifold (all triple ceramic coated)
TiAL 38mm Wastegate
HKS SSQ Limited Edition BOV
Turbosmart Boost controller
PWR Intercooler
All plumbing and couplers required
Autometer Boost Gauge
Innovate WideBand O2 Sensor & AFR Gauge
Racing Beat Oil filter sandwich plate, & coolant T's
New Rad hose
Interceptor-X (Microtech) ECU w/ remote ECU commander
4 650cc Fuel Injectors
255 lb/min fuel Pump
GReddy Oil catch Can
All gaskets & Hardware Needed.
This is truly a plug and play kit, you can install it in a day (I did it in 6 hours), and have the car running by the night. Makes the car a totally different experience. Tons of low and mid range torque, so much more fun to drive.
Kit only has 4k on it.
Im asking 5000 OBO.
I have a bunch of pictures on the kijiji posting
http://toronto.kijiji.ca/c-ViewAd?Ad...424;50506213;;
If you have any questions, just contact me!
P.S
the best way to contact me is my e-mail.
bindon.bryan@gmail.com
#3
Fire-Spewing Maniac
Thread Starter
Join Date: Sep 2004
Location: Toronto, Canada
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
#5
good set up...now you give me a motivation to get Gt35R turbo fo rmy next set up...
are you selling the turbo itself? if you are, let me know , i will take it off your hand
steven
are you selling the turbo itself? if you are, let me know , i will take it off your hand
steven
#7
Fire-Spewing Maniac
Thread Starter
Join Date: Sep 2004
Location: Toronto, Canada
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
Its pretty easy to make power, and MAN does it spool fast. I was running 10 PSI and I would have full boost at 3800rpm, its nuts.
If I remember correctly I got 335 whp at 10, which is pretty good.
I was originally going to put water injection on it, and run 15-16 psi, which more then likely would have put me over 400 rwhp.
The hotside is a PTP kit, and I basically adapted that to my custom setup.
Thanks for the interest guys!
If I remember correctly I got 335 whp at 10, which is pretty good.
I was originally going to put water injection on it, and run 15-16 psi, which more then likely would have put me over 400 rwhp.
The hotside is a PTP kit, and I basically adapted that to my custom setup.
Thanks for the interest guys!
#9
Fire-Spewing Maniac
Thread Starter
Join Date: Sep 2004
Location: Toronto, Canada
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
That will take some digging around its been forever since that dyno (damn Canadian winters are keeping me from driving this thing)
Ill post it up if I can find it, hopefully it didn't get lost when I formatted
Ill post it up if I can find it, hopefully it didn't get lost when I formatted
#12
Fire-Spewing Maniac
Thread Starter
Join Date: Sep 2004
Location: Toronto, Canada
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, the last two winters have been pretty crazy. However, I am putting the 8 up for sale soon and getting myself a new car. Having the 8 under the knife so often definitely cut into the time I got to spend in it, so I think having a car to drive all the time and a project car is a better option
#15
kevin@rotaryresurrection
iTrader: (3)
Join Date: Feb 2005
Location: east of Knoxville, TN
Posts: 1,415
Likes: 0
Received 57 Likes
on
35 Posts
Although I wouldnt expect the renesis to put out the same numbers, I made 466rwhp @ 21psi on pump gas with a gt35r on my 2nd gen rx7 last year. 15psi would put you in the 375 range I'd guess.
Thread
Thread Starter
Forum
Replies
Last Post
TotalAutoPerformance
Vendor Classifieds
12
10-17-2018 09:00 AM
Digitz0070
Series I Aftermarket Performance Modifications
5
09-25-2015 10:58 PM