Dumb Question Thread - no flaming or sarcasm allowed
12-07-2010, 07:06 PM
#153
Registered User
Join Date: Aug 2010
Location: Milwaukee, WI
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Sorry had to do this. Have you tried Ebay? Ebay is usually my go to place.
12-07-2010, 07:15 PM
#154
Registered
12-12-2010, 02:30 AM
#160
does not matter,
you syncos are gone in 2 to 5th..
and you cant afford pre mix!
beers
you syncos are gone in 2 to 5th..
and you cant afford pre mix!
beers
What pre-mix ratio should I use with Sunoco 89 octane driving in the winter months in Indiana?
Note: I live on the North side of town but commute to the South side of town for work and since it's farther South my NeroMazmax data logger shows 8 degree warmer temps at lunch time and the DIY section of this forum with Series II oil winter oil cooler block off plate (I used 5 zip ties and not 6 cuz my litter brother took one to fix his skateboard) and I'm thinking that when I did an oil filter analysis and found .00000000237 parts per million of uranium 236 I should probably go with a little more pre-mix about 185F oil or get a new thermostat. Would you recommend a napa or fram?
This is my first time on this forum so please no flames.
Rotor on dude
Also, which is better a Nissan 370Z or a Shinka with graphite shift ***?
Note: I live on the North side of town but commute to the South side of town for work and since it's farther South my NeroMazmax data logger shows 8 degree warmer temps at lunch time and the DIY section of this forum with Series II oil winter oil cooler block off plate (I used 5 zip ties and not 6 cuz my litter brother took one to fix his skateboard) and I'm thinking that when I did an oil filter analysis and found .00000000237 parts per million of uranium 236 I should probably go with a little more pre-mix about 185F oil or get a new thermostat. Would you recommend a napa or fram?
This is my first time on this forum so please no flames.
Rotor on dude
Also, which is better a Nissan 370Z or a Shinka with graphite shift ***?
12-14-2010, 12:13 PM
#161
Registered User
Join Date: Dec 2010
Location: TN
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Just bought a 2008 Brilliant Black RX8 (GT package) and couldn't think of a better thread to put my first post in, so on to the dumb question!!
Where the hell is the AUX input for the stereo (because, really, it's a 2008...no way there isn't one!!)
Where the hell is the AUX input for the stereo (because, really, it's a 2008...no way there isn't one!!)
12-14-2010, 12:47 PM
#163
Registered
Join Date: Sep 2010
Location: Ponchatoula, LA
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
I don't think they started putting them in untill 2009. But if it did have one it would be in the center consol...slide it back then open it and it would be right there next to the power outlet.
12-16-2010, 06:30 PM
#165
Registered User
Join Date: Nov 2010
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
When I drive around in my 8 my gear shifter kinda bobs up and down with the imperfection id the road. Is this normal? its a MT 2008 GT.
I'm asking because I recently replaced the cross member that's right below the gear box and it came with a screw that didn't fit quite well in the brace. It just hit the underside of the gearbox only half way in. I guess it might be a support for the AT rx8's??
I'm asking because I recently replaced the cross member that's right below the gear box and it came with a screw that didn't fit quite well in the brace. It just hit the underside of the gearbox only half way in. I guess it might be a support for the AT rx8's??
12-16-2010, 08:29 PM
#166
Registered
Join Date: Sep 2010
Location: Ponchatoula, LA
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
When I drive around in my 8 my gear shifter kinda bobs up and down with the imperfection id the road. Is this normal? its a MT 2008 GT.
I'm asking because I recently replaced the cross member that's right below the gear box and it came with a screw that didn't fit quite well in the brace. It just hit the underside of the gearbox only half way in. I guess it might be a support for the AT rx8's??
I'm asking because I recently replaced the cross member that's right below the gear box and it came with a screw that didn't fit quite well in the brace. It just hit the underside of the gearbox only half way in. I guess it might be a support for the AT rx8's??
12-20-2010, 03:52 PM
#168
Resident Alien
Join Date: Apr 2010
Location: Florida
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
Ok, my turn I guess. I'll admit to right away that when I bought this car I didn't do close to enough research on it, so after the fact, I got the service history from Mazda and I was hoping you guys could shine some light on a few of the entries:
8/4/2008 - 11917 miles - ENG,REMAN/NO GSKTS M/T
6/25/2008 - 11748 miles - ENG,REMAN/NO GSKTS M/T
6/18/2008 - 11748 miles - MSP16 ENGIN LACK OF
6/18/2008 - 11748 miles - KIT, CATALYTIC CONVERTER
9/12/2006 - 215 miles - KIT, CATALYTIC CONVERTER
I'm not the brightest out there, so I thought ENG,REMAN was a new re-manufactured engine. But two in 200 miles? Thought KIT, CAT would be a new cat, but at 215 miles?
So I'm probably wrong..
8/4/2008 - 11917 miles - ENG,REMAN/NO GSKTS M/T
6/25/2008 - 11748 miles - ENG,REMAN/NO GSKTS M/T
6/18/2008 - 11748 miles - MSP16 ENGIN LACK OF
6/18/2008 - 11748 miles - KIT, CATALYTIC CONVERTER
9/12/2006 - 215 miles - KIT, CATALYTIC CONVERTER
I'm not the brightest out there, so I thought ENG,REMAN was a new re-manufactured engine. But two in 200 miles? Thought KIT, CAT would be a new cat, but at 215 miles?
So I'm probably wrong..
12-20-2010, 07:00 PM
#169
What global warming?
Join Date: Mar 2008
Location: Bay Area, CA
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
I was actually considering switching to synthetic oil (Royal Purple). However I have put 35K miles on my car already and have only used non synthetic 5W20. I have hear that there are some potential problems with switching to synthetic after using something else for some time. Anyone know if there are any precautions I should take when switching, or whether I should switch at all?
12-20-2010, 07:05 PM
#170
12-25-2010, 09:39 PM
#171
I am dying to listen to new music in my car but I ran out of CD R.
Would music burned on a DVD R play on our RX8s ??? LOL
Nvm it doesnt work
HOw can i put new music into my car ??!!! No ipod adapter and no more CD R and no CD RW.
Im just dying to listen to new stuff lol
Would music burned on a DVD R play on our RX8s ??? LOL
Nvm it doesnt work
HOw can i put new music into my car ??!!! No ipod adapter and no more CD R and no CD RW.
Im just dying to listen to new stuff lol
Last edited by Rotary-RX8; 12-25-2010 at 09:52 PM.
12-26-2010, 02:36 PM
#174
What global warming?
Join Date: Mar 2008
Location: Bay Area, CA
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
https://www.rx8club.com/series-i-interior-audio-electronics-24/rx-8-ipod-icelink-installed-42538/
There are other alternatives, I think there are a few companies making a similar product which integrates in the same manner (IceLink, XLink, and I think at least one company has changed it's name since then), I really dont remember where I bought my kit from, but one piece of advice: do not order the blue tooth kit which comes optional with this kit, as it does not work; I ended up taking it out.
