Dumb Question Thread - no flaming or sarcasm allowed
06-07-2012, 05:24 PM
#928
Registered
Join Date: Mar 2012
Location: New Hampshire
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
engine shutdown procedure
Hey,
was talking to someone today who told me "proper" procedure for shuting down an 8 is reving to 3k hold for 2 seconds and kill it. true? what's the pupose? thanks
was talking to someone today who told me "proper" procedure for shuting down an 8 is reving to 3k hold for 2 seconds and kill it. true? what's the pupose? thanks
06-07-2012, 06:18 PM
#931
Nature vs. Nurture
iTrader: (5)
Join Date: Oct 2009
Location: Maple Grove, MN
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
The prior owner of the 2005 I had flooded it 3 times (1 of those was his new wife). He only had it for 20k, and each time they put in new plugs. So, I almost always ran it to warm or held the rs up and shut it off as they went down. I never flooded it and I have told the subequent owner to do the same. There is another reason to warm the 2004/2005s up - to reduce the milky crap in the oil in cooler temps (like under 40).
06-08-2012, 12:04 PM
#932
noob
Join Date: May 2012
Location: Fort Meade, MD
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
06-12-2012, 12:06 AM
#935
Registered
Join Date: Jul 2011
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
i got new motor but ran into problems
i own a 07 rx8 an i bought a new motor they place i bought it from said it was from and 09 but the wiring harness for the ecu is different and few other things are different cause it arrived and the top plastic parts where broke so i was just gonna replace them with my old ones but things didnt match up. why is this i thought 04-09 where all the same am i wrong or did i maybe get wrong one
06-12-2012, 12:14 AM
#937
Whoa, you need to slow down, think about what you want to type, and re-read your message before hitting that "post reply" button.
(Sorry, I know this thread is meant to avoid "flaming", but C'MON! At least attempt proper grammar, people!!
)
Anywho, the engines for the 09 and later (series II) are very different than the 04-08 models. If you can, return the purchased engine and look for one from a series I car. Trying to continue will be a headache for you and everyone here...
(Sorry, I know this thread is meant to avoid "flaming", but C'MON! At least attempt proper grammar, people!!
)Anywho, the engines for the 09 and later (series II) are very different than the 04-08 models. If you can, return the purchased engine and look for one from a series I car. Trying to continue will be a headache for you and everyone here...
06-12-2012, 06:51 AM
#939
IMO it's more a generational thing than a text (sms) thing.
While the above statement may or may not be true (I have no "data" to back it up) what I do know from personal experience is that;
On this forum if you don't care about the quality of your post, don't expect anybody to care about how they respond.
I think its got to do with respect (again a guess).
The only time I see this rule ignored is for those posters where English is not their first language.
So redline, this is not a direct retort to your post (of flame) but more a general statement that I hope new members understand.
So, for all the new members your experience will be much improved on this forum if you put some effort in to grammar and spelling.
Just saying ...
06-12-2012, 07:20 AM
#940
Extraordinary Engineering
Best approach is to install oil cooler covers in cold weather and add an oil temp gauge to monitor results. Aim for 180F (82C) to 195 (90C) oil temp (measured at the oil filter) when cruising in cold weather.
06-12-2012, 05:57 PM
#941
We've had these discussion before on this forum.
IMO it's more a generational thing than a text (sms) thing.
While the above statement may or may not be true (I have no "data" to back it up) what I do know from personal experience is that;
On this forum if you don't care about the quality of your post, don't expect anybody to care about how they respond.
I think its got to do with respect (again a guess).
The only time I see this rule ignored is for those posters where English is not their first language.
So redline, this is not a direct retort to your post (of flame) but more a general statement that I hope new members understand.
So, for all the new members your experience will be much improved on this forum if you put some effort in to grammar and spelling.
Just saying ...
IMO it's more a generational thing than a text (sms) thing.
While the above statement may or may not be true (I have no "data" to back it up) what I do know from personal experience is that;
On this forum if you don't care about the quality of your post, don't expect anybody to care about how they respond.
I think its got to do with respect (again a guess).
The only time I see this rule ignored is for those posters where English is not their first language.
So redline, this is not a direct retort to your post (of flame) but more a general statement that I hope new members understand.
So, for all the new members your experience will be much improved on this forum if you put some effort in to grammar and spelling.
Just saying ...
I think our culture is changing. In the lab I work in professional people, even upper management of our hospital I find that people are caring less about making e-mails so formal because it lacks emotion. People tend to find things written properly boring whereas reading something as a person would speak tends to give more personality.
Anywho I hope this guy can get his money back for that Series II engine. That would suck paying all that money then getting stuck with a engine you can't use. Guess he could always try and sell it on here if that turns out to be the case.
06-13-2012, 02:47 AM
#942
Registered
Join Date: Jul 2011
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
no i got the motor all wire in and putting the 09 ecu in the car im ordering it in the morning so im hoping after i get the new ecu ill be fine but if not ill just try and figure something out get some help on here cause most of it has been helpful
06-13-2012, 05:01 AM
#943
06-13-2012, 05:17 AM
#944
IMO grammar is just a means of written communication. Communication varies from culture to culture so naturally the written form should change. I don't feel we should shape the way we write based on a set of rules that don't apply to how we speak hence Latin is dead. My English professor would try and hit me right now if she knew I was saying this lol. The reason I say txting has made spelling obsolete is because as a culture we have found ways of communicating with shortened purposely misspelled words. Still as a culture we tend to view spelling as a lack of intelligence in a professional work place even though we view the strict guidelines of English grammar as pointless and annoying.
I think our culture is changing. In the lab I work in professional people, even upper management of our hospital I find that people are caring less about making e-mails so formal because it lacks emotion. People tend to find things written properly boring whereas reading something as a person would speak tends to give more personality.
I think our culture is changing. In the lab I work in professional people, even upper management of our hospital I find that people are caring less about making e-mails so formal because it lacks emotion. People tend to find things written properly boring whereas reading something as a person would speak tends to give more personality.
That, I believe had more to do with it than any cultural aspect.
(I wonder if it would be different if we just started with qwerty keyboards on phones)
Don't confuse my position on poor grammar and spelling with well placed acronyms, like:
IIRC
TTYL
LOL
BTW
I have no issue with common phrases being shortened like this especially when txting (or posting if they are correctly inserted)
What I do not like to see is this:
"i am having problems with my rx8 its got no powers. the other day at the lights the idle was really rough then at the next set of lights it died. so i htough i would do a redline to get the carbon out and on the ramp the highway i revvd to 9k but it would not go then it all most died and it would go over 4ooo revs. help whats wrong with my car its a red one."
LOL Anyways ... no caps, no double space after period, no commas, and just one big wall of text without any hard returns.
Last edited by wcs; 06-13-2012 at 07:21 AM.
06-13-2012, 07:30 AM
#946
Extraordinary Engineering
...
What I do not like to see is this:
"i am having problems with my rx8 its got no powers. the other day at the lights the idle was really rough then at the next set of lights it died. so i htough i would do a redline to get the carbon out and on the ramp the highway i revvd to 9k but it would not go then it all most died and it would go over 4ooo revs. help whats wrong with my car its a red one."
...
.
What I do not like to see is this:
"i am having problems with my rx8 its got no powers. the other day at the lights the idle was really rough then at the next set of lights it died. so i htough i would do a redline to get the carbon out and on the ramp the highway i revvd to 9k but it would not go then it all most died and it would go over 4ooo revs. help whats wrong with my car its a red one."
...
.
06-13-2012, 10:40 AM
#947
"i am having problems with my rx8 its got no powers. the other day at the lights the idle was really rough then at the next set of lights it died. so i htough i would do a redline to get the carbon out and on the ramp the highway i revvd to 9k but it would not go then it all most died and it would go over 4ooo revs. help whats wrong with my car its a red one."
.
06-14-2012, 01:16 AM
#949
"i am having problems with my rx8 its got no powers. the other day at the lights the idle was really rough then at the next set of lights it died. so i htough i would do a redline to get the carbon out and on the ramp the highway i revvd to 9k but it would not go then it all most died and it would go over 4ooo revs. help whats wrong with my car its a red one."
In one hundred years that is how people will speak, and geniuses will have IQ's of 85. Look at the rate stupidity breeds. To zoo_yorker99, I think it would be cheeper to just buy another engine than it would to try and do a Series II conversion. Has anyone one here actually done a Series II swap? This would be the first guy I've seen attempt this in the couple years I've been on here.
06-14-2012, 01:22 AM
#950
Does anyone know where I can purchase a brand new SSV valve assembly besides the dealer I was wondering does anyone know any online parts stores that sale cheaper than the dealer? The parts i need are:
N3H4-20-155A-SSV Gasket
9979-60-640-New extended bolt
N3H5-20-160F-SSV Valve
I searched and cannot find them! any help is appreciated.
N3H4-20-155A-SSV Gasket
9979-60-640-New extended bolt
N3H5-20-160F-SSV Valve
I searched and cannot find them! any help is appreciated.