RX-FX Fender Vents
#51
Does anyone have pics of these installed on a TG? I have the stock rims, and I think they look okay, but they stand alone, and I was thinking the aluminum vents with black grille would look good on a TG and complement the stock rims. There's a few shots of a TG with these painted TG to match if you view the TGs thread (2 or 3 pages back from the date of this post) - it looks really good.
#52
CF Vents Not Sticking
I was at the dealership to get some other work done and asked them to install the CF Vents. Its the RX-FX Fender Vents Carbon Fiber Finish ($119)
http://www.rotaryfx.com/product_p/ext1051.htm
The 3M adhesive tape was dried out so it wasn't sticking. The dealer also said they didn't fit properly. I thought the fit would be perfect. As for the 3M tape, any suggestions
Pretty bummed out.
http://www.rotaryfx.com/product_p/ext1051.htm
The 3M adhesive tape was dried out so it wasn't sticking. The dealer also said they didn't fit properly. I thought the fit would be perfect. As for the 3M tape, any suggestions
Pretty bummed out.
#53
I was at the dealership to get some other work done and asked them to install the CF Vents. Its the RX-FX Fender Vents Carbon Fiber Finish ($119)
http://www.rotaryfx.com/product_p/ext1051.htm
The 3M adhesive tape was dried out so it wasn't sticking. The dealer also said they didn't fit properly. I thought the fit would be perfect. As for the 3M tape, any suggestions
Pretty bummed out.
http://www.rotaryfx.com/product_p/ext1051.htm
The 3M adhesive tape was dried out so it wasn't sticking. The dealer also said they didn't fit properly. I thought the fit would be perfect. As for the 3M tape, any suggestions
Pretty bummed out.
#54
Former Sponsor
Join Date: Mar 2008
Location: Rancho Cordova, CA
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
The vents will fit fine. They were created from a digital scan of the stock vents and the vehicle surface.
The tape used is not "trash." The tape used is 3M Very High Bond (VHB). After installing the vents on our own car for pictures, we tried swapping them out for a different set the next day and had trouble getting them off. The vents we have on our car now are the last set that was photographed back when we launched the vents. There's no sign of them loosening up at all. We've used this tape long enough to know that it will work great if the surface is properly prepared.
-Dave
The tape used is not "trash." The tape used is 3M Very High Bond (VHB). After installing the vents on our own car for pictures, we tried swapping them out for a different set the next day and had trouble getting them off. The vents we have on our car now are the last set that was photographed back when we launched the vents. There's no sign of them loosening up at all. We've used this tape long enough to know that it will work great if the surface is properly prepared.
-Dave
#55
The vents will fit fine. They were created from a digital scan of the stock vents and the vehicle surface.
The tape used is not "trash." The tape used is 3M Very High Bond (VHB). After installing the vents on our own car for pictures, we tried swapping them out for a different set the next day and had trouble getting them off. The vents we have on our car now are the last set that was photographed back when we launched the vents. There's no sign of them loosening up at all. We've used this tape long enough to know that it will work great if the surface is properly prepared.
-Dave
The tape used is not "trash." The tape used is 3M Very High Bond (VHB). After installing the vents on our own car for pictures, we tried swapping them out for a different set the next day and had trouble getting them off. The vents we have on our car now are the last set that was photographed back when we launched the vents. There's no sign of them loosening up at all. We've used this tape long enough to know that it will work great if the surface is properly prepared.
-Dave
#57
Registered User
Join Date: Dec 2008
Location: Bay Area, California
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone have pictures of these vents on their 8? The one I'm looking for is the one that the strakes can't fit onto. The product code from rotaryfx is Product Code: EXT1051
#58
SARX Legend
iTrader: (46)
Yeah I am getting these for Christmas. I have quite a bit of experience with 3M tape and sometimes it just doesn't stick well. When I installed my front lip I used regular 3M double sided and after prepping it, it stuck fine but then after a week one side came off. Redid it the exact same way and it has been fine ever since. I think temperature and humidity play a role as well.
These vents look sick, can't wait to get them on.
These vents look sick, can't wait to get them on.
#59
Thread
Thread Starter
Forum
Replies
Last Post
Jst4fun
RX-8 Parts For Sale/Wanted
18
04-17-2021 07:43 AM