When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I just wanted to say thank you to both for the updated info on the mount. Made me chose the rx8 performance over the banzi in my build list. Seems much more promising!
Great, glad to hear you like it Fickert and look forward to shipping you one for your build! If you have any questions feel free to send me an email or ask here.
The car was at the Dyno (Beyond Redline Performace, Green Bay, WI) for three weeks.
They tuned anything and everything. Its amazing what the AEM Infinity can do. The AEM has full control of the Drive-by-wire throttle body and it is just as responsive as a cable throttle body. They tuned in my Flex Fuel sensor so I can run anything from 91 pump gas to E85 and everything in-between. I don't have to do anything. Just simple add in the E85 and the ECU adjusts tune and boost levels accordingly. Also. Boost is controlled with Throttle position %. So instead of "High" and "Low" Boost. The ECU will read Throttle % and give boost accordingly.
For example. Max boost @ WOT is 20PSI. But if I give it 1/2 throttle the ECU will regulate to a preset boost level. So 10 or 15 PSI. Same goes for 1/4 or 3/4 throttle. They also tuned in a "Clutch Switch" and "Brake Switch"
Clutch switch allows for Launch control / 2-step. This utilizes VSS
Brake Switch allows for me to essentially "brake boost" but with full boost. I have not tried out these features yet.
The cars runs, drives, and idles amazing. But we did run into a boost creep issue. So horsepower was not able to be tuned. Only drive-ability. Basically how my single 60mm wastegate was routed was causing boost creep. I brought the car home and pulled the manifold out and rerouted my wastegate(s) I added two waste gates and got rid of the big single. Back to the Dyno I go!
Neal says he hasn’t been on the forum since forever, and the build is at 4,380 days now, so just going to share a few things he told me
early part of last year he got a new Garrett G40-900 turbo setup, conservatively tuned it was low 5xx whp and high 4xx ft-lbs
.
which he just recently did the new hot air intake and some larger injectors, should be rocking the kazbah in a couple of weeks following a tuning session.
During late winter-early spring of this year he beat me to the punch with the installation of the Hotel7 7-spd BMW DCT transmission, CANTCU controller, aluminum driveshaft, and PPF delete setup
. .
along with a new full 3.5” exhaust exiting out the side in front of the RH rear tire
.
should be a real track monster after the new dyno tune …
04-22-2016, 11:24 AM
and some larger injectors, should be rocking the kazbah in a couple of weeks following a tuning session.
