victor13b

you said section Lim? what you can't tell me? cut? the lim?

dannobre

iTrader: (3)

You can cut it horizontally and take out about an inch or more and reweld it. That will lower the upper by that amount and it may fit

firecran

iTrader: (3)

Xcessive FD Lower Intake Manifold is a bolt on option.
Moves the lim further forward to clear the firewall.



.

TeamRX8

iTrader: (25)

^^+1.

LIM - lower intake manifold

victor13b

https://db.tt/L7Gv1AUq
i planned to do that .....what u think

dannobre

iTrader: (3)

Could work if you will get enough room.
Basically that won't give you much room...so before you go that way you need to make sure it will be enough room

victor13b

https://db.tt/L7Gv1AUq
here some pics ...I hope that cut can't solder in the machine shop.

dznutzuk

Vic you realize that the engine moves while you're driving it right? Even if the manifold isn't touching the firewall, at some point it will-there's definetly not enough room there. Please don't leave it like that...