RR Single Exit Cat-back exhaust system!
. I should have payed more attention to your exhaust on that day but that was the last thing on my mind at the time. I'll check it out on Zoom's.
01-25-2012, 10:09 AM
#103
Info on this brice?
Thats would make a lot of sense. Some of these guys could have hangers that are 8 years old. I will def. replace them at the same time with a new exhaust.
Could that play in movement also be the cause of melted shrouds?
Either way, RR or HKS I'm gonna purchase it through you. Everyone who has it seems to be happy with the over all build quality and the sound. I'm just nit picking on the fine details thats all.
Thats would make a lot of sense. Some of these guys could have hangers that are 8 years old. I will def. replace them at the same time with a new exhaust.
Could that play in movement also be the cause of melted shrouds?
Either way, RR or HKS I'm gonna purchase it through you. Everyone who has it seems to be happy with the over all build quality and the sound. I'm just nit picking on the fine details thats all.
The melted shrouds would be on any exhaust really so I don't believe it to be the movement, it really occurs on the inside of the shroud so it is hard to see. It occurs because of the increase in diameter on tip.
01-25-2012, 10:33 AM
#104
The tip is certainly not painted, it is blue burnt stainless steel.
The melted shrouds would be on any exhaust really so I don't believe it to be the movement, it really occurs on the inside of the shroud so it is hard to see. It occurs because of the increase in diameter on tip.
The melted shrouds would be on any exhaust really so I don't believe it to be the movement, it really occurs on the inside of the shroud so it is hard to see. It occurs because of the increase in diameter on tip.
If you can't notice it then it wouldn't bother me but I've heard from several people with the agency power melting the $h!t out of their shrouds. I'm actually selling my old ones to a guy with the AP and his melted but prob. due to a clogged cat.
I should be meeting up with ZoomZoom tomorrow to look at his.
01-26-2012, 06:02 PM
#105
Got to actually see and listen to the exhaust today. It sounds awesome, it's loud but not to loud, has a great tone. I saw where zooms shroud melted a little but he had to point it out to me and I had to get down and actually look into, towards the back of the shroud to see it. Wouldn't have ever known if he hadn't pointed it out. I've found my new exhaust. Will be purchasing it mid febuary, thanks for all the imput brice and thanks once again zoom.
01-31-2012, 06:36 PM
#107
Registered
I think I've finally decided on my exhaust. I will be ordering as soon as I get my tax refund in. Will be within a week or two. What is the est wait time on a mid-pipe and cat-back if when I do finally order they will be back ordered. Thanks for any info.
02-01-2012, 11:19 AM
#110
From the other thread on this exhaust:
"We are going to be releasing a mazdaspeed style single exit add on lip so it eliminates the empty space. I have talked to the manufacturer already so this is going to happen by next spring most likely."
So is this still in the works cause I am very interested
"We are going to be releasing a mazdaspeed style single exit add on lip so it eliminates the empty space. I have talked to the manufacturer already so this is going to happen by next spring most likely."
So is this still in the works cause I am very interested
02-01-2012, 11:45 AM
#111
From the other thread on this exhaust:
"We are going to be releasing a mazdaspeed style single exit add on lip so it eliminates the empty space. I have talked to the manufacturer already so this is going to happen by next spring most likely."
So is this still in the works cause I am very interested
"We are going to be releasing a mazdaspeed style single exit add on lip so it eliminates the empty space. I have talked to the manufacturer already so this is going to happen by next spring most likely."
So is this still in the works cause I am very interested
02-01-2012, 12:34 PM
#112
You could have read this thread or even <shudder> go to their website for the answer: http://raceroots.com/index.php/produ...t-exhaust.html
02-01-2012, 08:59 PM
#114
Update on rattle,
It appears I may have a unique issue. I finally got the car on a lift, armed with hangers to replace them all, but I found the problem, it's not the hangers. It seems the pipe passes to close to the passenger side of the "tunnel", so close it's almost touching the heat shield for the fuel tank. Once the pipe passes the diff, it ever so slightly taps on the part of the frame that goes down towards the suspension. I tried to move the pipe around, but that seems to be it's "natural resting position"? All exhaust flanges good.
I went run back to AZ and got some header wrap and wrapped the pipe by the diff for now. No rattles anymore. But still going to bring it to an exhaust shop and see if maybe I can get the pipe bent to fit better.
It appears I may have a unique issue. I finally got the car on a lift, armed with hangers to replace them all, but I found the problem, it's not the hangers. It seems the pipe passes to close to the passenger side of the "tunnel", so close it's almost touching the heat shield for the fuel tank. Once the pipe passes the diff, it ever so slightly taps on the part of the frame that goes down towards the suspension. I tried to move the pipe around, but that seems to be it's "natural resting position"? All exhaust flanges good.
I went run back to AZ and got some header wrap and wrapped the pipe by the diff for now. No rattles anymore. But still going to bring it to an exhaust shop and see if maybe I can get the pipe bent to fit better.
02-04-2012, 10:55 PM
#118
Registered
Join Date: Apr 2009
Posts: 918
Likes: 0
Received 0 Likes
on
0 Posts
this is definately for u man...
u can make a fake pipe and extend it to the other side to make it look balanced
02-17-2012, 10:39 AM
#119
I ended up getting a good deal on the HKS out of state to avoid florida sales tax. Did buy the mounts though, I had those put on before the exhaust arrived and I was amazed by the difference. Sound wise I could not tell the difference between the Raceroots and the HKS.
The single exit tone is wonderful, but it does vibrate my brains when I get on it, I'm getting a silencer to go in the exhaust to tame it a little, it's very loud. The cheep agency power mid pipe actually sounds good with the single exit exhaust. It sounded like crap on the stock exhaust, or the exhaust is so loud I can't hear the rasp anymore.
Single exit exhaust in my opinion has the best tone out of any of the dual systems that I've heard. Can' tell the difference between the RR and the HKS, I really only payed the extra for the bling of the titanium (I love shiny things) tip.
Everyone who wants to save some weight and doesn't mind the exotic look of the single tip should ****** up RR exhaust when they come back in stock. Well worth the money.
The single exit tone is wonderful, but it does vibrate my brains when I get on it, I'm getting a silencer to go in the exhaust to tame it a little, it's very loud. The cheep agency power mid pipe actually sounds good with the single exit exhaust. It sounded like crap on the stock exhaust, or the exhaust is so loud I can't hear the rasp anymore.
Single exit exhaust in my opinion has the best tone out of any of the dual systems that I've heard. Can' tell the difference between the RR and the HKS, I really only payed the extra for the bling of the titanium (I love shiny things) tip.
Everyone who wants to save some weight and doesn't mind the exotic look of the single tip should ****** up RR exhaust when they come back in stock. Well worth the money.
03-30-2012, 11:39 AM
#120
Registered
Is there an update as to when these will be back from the manfacturing plant? I ordered mine at the end of February. I'm excited to finally get mine installed on the car.
04-02-2012, 01:12 PM
#121
The price increase comes from added expenses for shipping costs and we will see the price change when these arrive and are ready to ship.
04-03-2012, 12:21 PM
#122
Registered
Just got an update back from them today and they are expecting another 3-4 weeks before completion. The bad news besides the delay is that there will be a price increase when these arrive, the good news is that customers that have already prepaid the $350 price point will get it at the price point and I will NOT charge more due to extended wait times.
The price increase comes from added expenses for shipping costs and we will see the price change when these arrive and are ready to ship.
The price increase comes from added expenses for shipping costs and we will see the price change when these arrive and are ready to ship.
Seriously though, looking forward to getting mine. Thanks for the update.
