Notices
NW RX-8 Forum Serving WA, OR, ID, AK

Interest in Flying up MazdaManiac for an AP dyno tuning weekend

Thread Tools
 
Rate Thread
 
Old Dec 29, 2008 | 10:12 AM
  #176  
dondo's Avatar
100% baller (finally!)
iTrader: (7)
 
Joined: Jun 2007
Posts: 5,385
Likes: 2
From: Seattle, WA
maybe we can do it together this weekend or something? sat after the morning meet perhaps?
Reply
Old Dec 29, 2008 | 10:38 AM
  #177  
shaunv74's Avatar
Thread Starter
Power!!
 
Joined: Feb 2004
Posts: 4,412
Likes: 3
From: Sunny See attle
Originally Posted by dondo
maybe we can do it together this weekend or something? sat after the morning meet perhaps?
Or after Kris' drive on Sunday. Or both. You need 2 drive cycles from cold start to full warm to get the computer to write to the LTFT so make sure you have the two drive cycles first so we can log the data Jeff needs.

I won't be able to make it on Saturday but will be there on Sunday.
Reply
Old Dec 29, 2008 | 11:55 PM
  #178  
Nemesis8's Avatar
Bigus Rotus
iTrader: (3)
 
Joined: Jun 2004
Posts: 8,573
Likes: 1
From: Missouri
Originally Posted by shaunv74
As Jeff said above folks who already have an Accessport please download Jeff's baseline for your application and follow his instructions to get your baseline engine calibration set up before he comes up.

you can find instructions in this thread: https://www.rx8club.com/mazdamaniac-183/new-mazdamaniac-base-calibrations-162263/
Yeah, been meaning to do that - but I'm still turning wrenches...


What have a got, one week
Reply
Old Dec 31, 2008 | 07:03 PM
  #179  
shaunv74's Avatar
Thread Starter
Power!!
 
Joined: Feb 2004
Posts: 4,412
Likes: 3
From: Sunny See attle
I just did my two drive cycles on the new base calibration this week and did my idle and cruise datalogs today. I sent them to Jeff. I recommend all of you who have your Accessports perform this pre-work and send it to him this week or next week so he can send them back to you before the 16th.

It will take you a couple of days because you have to warm up and cool down the car completely twice before you can start logging so make sure to leave yourself some time to get this done.

Last edited by shaunv74; Dec 31, 2008 at 07:13 PM.
Reply
Old Dec 31, 2008 | 08:52 PM
  #180  
Arrrrex-8's Avatar
Registered
 
Joined: Mar 2008
Posts: 86
Likes: 0
From: Everett, wa
Just did my first cycle today.
Reply
Old Jan 1, 2009 | 04:06 PM
  #181  
pdxhak's Avatar
Official Post Whore
iTrader: (2)
 
Joined: Jan 2003
Posts: 10,462
Likes: 32
From: Portland,OR
Any chance there will be time for people to get a few dyno runs? Not looking like I will have the money to buy an AP (promotion delayed ). No worries is there is not enough time. Assuming weather is good, I'm still going to drive up to hang out and meet everyone
Reply
Old Jan 1, 2009 | 04:22 PM
  #182  
shaunv74's Avatar
Thread Starter
Power!!
 
Joined: Feb 2004
Posts: 4,412
Likes: 3
From: Sunny See attle
Originally Posted by pdxhak
Any chance there will be time for people to get a few dyno runs? Not looking like I will have the money to buy an AP (promotion delayed ). No worries is there is not enough time. Assuming weather is good, I'm still going to drive up to hang out and meet everyone
Right now all the slots are full so I don't think there will be extra time. Of course you're welcome to come up and hang out and if someone backs out and there are no takers for tuning you are welcome to step up and take the slot.
Reply
Old Jan 1, 2009 | 04:56 PM
  #183  
pdxhak's Avatar
Official Post Whore
iTrader: (2)
 
Joined: Jan 2003
Posts: 10,462
Likes: 32
From: Portland,OR
Sounds good.
Reply
Old Jan 1, 2009 | 07:53 PM
  #184  
dondo's Avatar
100% baller (finally!)
iTrader: (7)
 
Joined: Jun 2007
Posts: 5,385
Likes: 2
From: Seattle, WA
do we each need the full hour then?
Reply
Old Jan 1, 2009 | 07:57 PM
  #185  
MazdaManiac's Avatar
Banned
iTrader: (3)
 
Joined: Oct 2003
Posts: 16,386
Likes: 28
From: Under my car
Originally Posted by dondo
do we each need the full hour then?
Yes, and then some.
It is usually just enough time to get it done.
In any event, the cost for the dyno operator is equally divided, regardless of the actual amount of time used.
Its the only sensible way to run the event.

Imagine if you had to run something like this and you were trying to decide who owed $47 and who owed $53?
Reply
Old Jan 1, 2009 | 08:00 PM
  #186  
dondo's Avatar
100% baller (finally!)
iTrader: (7)
 
Joined: Jun 2007
Posts: 5,385
Likes: 2
From: Seattle, WA
Originally Posted by MazdaManiac
Yes, and then some.
It is usually just enough time to get it done.
In any event, the cost for the dyno operator is equally divided, regardless of the actual amount of time used.
Its the only sensible way to run the event.

Imagine if you had to run something like this and you were trying to decide who owed $47 and who owed $53?
ok, i was just thinking that if there was extra time i wouldn't care if someone else jumped on. if there's no extra time it doesn't matter though.
Reply
Old Jan 2, 2009 | 01:58 AM
  #187  
shaunv74's Avatar
Thread Starter
Power!!
 
Joined: Feb 2004
Posts: 4,412
Likes: 3
From: Sunny See attle
Originally Posted by dondo
ok, i was just thinking that if there was extra time i wouldn't care if someone else jumped on. if there's no extra time it doesn't matter though.
If we have 8 people I don't think we'll have extra time. We'll be hard pressed to keep working through the group. But if someone backs out we will have our waiting list jump in first and pay their share and so on if there are other folks.
Reply
Old Jan 2, 2009 | 02:19 AM
  #188  
MazdaManiac's Avatar
Banned
iTrader: (3)
 
Joined: Oct 2003
Posts: 16,386
Likes: 28
From: Under my car
The concept of "time" is a pretty elastic one at least.
In the same time period, the Cali guys are planning on running 20 cars.

Needless to say, that dyno day will probably end up being much, MUCH longer than 8 hours.
Reply
Old Jan 2, 2009 | 02:34 AM
  #189  
laythor's Avatar
I zoom therefore I am.
 
Joined: Mar 2007
Posts: 4,919
Likes: 12
From: San Jose, CA
I'm bringing a pillow for that so cal dyno day
Reply
Old Jan 2, 2009 | 02:43 AM
  #190  
MazdaManiac's Avatar
Banned
iTrader: (3)
 
Joined: Oct 2003
Posts: 16,386
Likes: 28
From: Under my car
Originally Posted by laythor
I'm bringing a pillow for that so cal dyno day
I'm bringing an espresso machine, Actifed and a few gallons of ammonia so I can cook up some meth-lattes.
Reply
Old Jan 2, 2009 | 09:15 AM
  #191  
lancefan001's Avatar
Banned
 
Joined: Jul 2008
Posts: 71
Likes: 0
From: Ft. Lewis, WA
Well I got a **** load of money this year for christmas. I was going to use it to buy a few guns that will most likely be outlawed in about 20 days, but the State of Michigan is being gay and their offices were only open on monday this week. I got my pistol, but the rifle will have to wait.

So I can attend if I don't have to work. I would like to buy the tuner from MM and have him bring it up. If I can't get on the dyno it would be fine with me. I also just bought the K&N intake and the Agency Power exhaust. Im guessing that they should be tuned with the AP.
Reply
Old Jan 2, 2009 | 11:07 AM
  #192  
dondo's Avatar
100% baller (finally!)
iTrader: (7)
 
Joined: Jun 2007
Posts: 5,385
Likes: 2
From: Seattle, WA
Originally Posted by lancefan001
Well I got a **** load of money this year for christmas. I was going to use it to buy a few guns that will most likely be outlawed in about 20 days, but the State of Michigan is being gay and their offices were only open on monday this week. I got my pistol, but the rifle will have to wait.

So I can attend if I don't have to work. I would like to buy the tuner from MM and have him bring it up. If I can't get on the dyno it would be fine with me. I also just bought the K&N intake and the Agency Power exhaust. Im guessing that they should be tuned with the AP.
congrats! what other mods are you planning?
Reply
Old Jan 2, 2009 | 07:00 PM
  #193  
shaunv74's Avatar
Thread Starter
Power!!
 
Joined: Feb 2004
Posts: 4,412
Likes: 3
From: Sunny See attle
Originally Posted by lancefan001

So I can attend if I don't have to work. I would like to buy the tuner from MM and have him bring it up. If I can't get on the dyno it would be fine with me. I also just bought the K&N intake and the Agency Power exhaust. Im guessing that they should be tuned with the AP.
right now the slots are full but if you would like to be put on the waitlist let me know and I will put you on.


Regarding new Mods: Please make sure you put some miles on your car with any new mods to make sure they are working properly before your come to the dyno day. If you run in to problems with your intake or exhaust that mess up Jeff's tuning it will chew up time we don't have and probably cause you to have a bad experience.

Make sure any mods you put on before the tuning session are working properly and that you have put a couple hundred miles on them.

If you are having problems with any mods please get them worked out before the session or remove them so you have a proper running car for the tuning session.

Additionally what I've gathered from reading Jeff's threads is that aftermarket intakes, Fuel Injectors, and ignition systems are what affect the tune. Exhaust doesn't seem to be an issue.

Last edited by shaunv74; Jan 2, 2009 at 07:03 PM.
Reply
Old Jan 4, 2009 | 02:19 PM
  #194  
pdxhak's Avatar
Official Post Whore
iTrader: (2)
 
Joined: Jan 2003
Posts: 10,462
Likes: 32
From: Portland,OR
BTW if anyone needs a free OE exhaust then I can bring mine along.
Reply
Old Jan 4, 2009 | 05:31 PM
  #195  
kristopher_d's Avatar
Drive Master
 
Joined: Nov 2003
Posts: 1,670
Likes: 0
From: Redmond
Originally Posted by shaunv74
Regarding new Mods: Please make sure you put some miles on your car with any new mods to make sure they are working properly before your come to the dyno day.
Let's do a "Shake Down" run next weekend. Get your mods on the car, then come out and put some miles on them. If we meet at the Safeway across from my place we can use garage/driveway to do any wrenching that needs doing to get things right. I've a really good loop that'll make you exercise all the parts of your car so you can check for leaks, rattles, gremlins of any color and take care of them.
Reply
Old Jan 4, 2009 | 06:17 PM
  #196  
shaunv74's Avatar
Thread Starter
Power!!
 
Joined: Feb 2004
Posts: 4,412
Likes: 3
From: Sunny See attle
Final Payment:

I spoke with both Jeff and Kito about getting the final payment together.

Kristopher_d can collect the remainder of our money via the Paypal method you used to place your deposits then cut two payments: one to Kito and one to Jeff. This will definitely be the simplest method and allow people to use their credit or ATM cards if they wish. We will need to pay sales tax and Paypal fees for this transaction (9% ~$20) to pay Jeff and Kito so it will be $145.10.

The only exception is AngryBumblebee owes Jeff an additional $100 because he is not a MM AP customer.

You can make the final payment via this link: http://www.the-winding-road.com/modu...p?product_id=4

AngryBumblebee you can pay your remainder here: http://www.the-winding-road.com/modu...p?product_id=5

Otherwise you will need to bring cash to the event and will need to pay before you will be allowed to strap on to the dyno.

I know it's an additional $20 for tax etc. but this will definitely be the easiest way for all of us and allow people to use their credit cards to pay Jeff.

Please plan on making the final payment before Monday 1/11/09.

Let me know if there are any questions or concerns.

-Shaun

Last edited by shaunv74; Jan 4, 2009 at 06:40 PM.
Reply
Old Jan 4, 2009 | 07:40 PM
  #197  
dondo's Avatar
100% baller (finally!)
iTrader: (7)
 
Joined: Jun 2007
Posts: 5,385
Likes: 2
From: Seattle, WA
Originally Posted by shaunv74
Final Payment:

I spoke with both Jeff and Kito about getting the final payment together.

Kristopher_d can collect the remainder of our money via the Paypal method you used to place your deposits then cut two payments: one to Kito and one to Jeff. This will definitely be the simplest method and allow people to use their credit or ATM cards if they wish. We will need to pay sales tax and Paypal fees for this transaction (9% ~$20) to pay Jeff and Kito so it will be $145.10.

The only exception is AngryBumblebee owes Jeff an additional $100 because he is not a MM AP customer.

You can make the final payment via this link: http://www.the-winding-road.com/modu...p?product_id=4

AngryBumblebee you can pay your remainder here: http://www.the-winding-road.com/modu...p?product_id=5

Otherwise you will need to bring cash to the event and will need to pay before you will be allowed to strap on to the dyno.

I know it's an additional $20 for tax etc. but this will definitely be the easiest way for all of us and allow people to use their credit cards to pay Jeff.

Please plan on making the final payment before Monday 1/11/09.

Let me know if there are any questions or concerns.

-Shaun
if we want to pay the balance in cash, who should i give it to and when?
Reply
Old Jan 4, 2009 | 08:08 PM
  #198  
shaunv74's Avatar
Thread Starter
Power!!
 
Joined: Feb 2004
Posts: 4,412
Likes: 3
From: Sunny See attle
Originally Posted by dondo
if we want to pay the balance in cash, who should i give it to and when?
You would give Chris and I the money for the dyno and Jeff the money for his time. Your deposit will go towards your portion of the dyno.
Reply
Old Jan 5, 2009 | 10:18 AM
  #199  
Nemesis8's Avatar
Bigus Rotus
iTrader: (3)
 
Joined: Jun 2004
Posts: 8,573
Likes: 1
From: Missouri
OK, I just paid thru Kris's site with PayPal. Making my log files next weekend. I guess the only item left for me, is planning the road trip up there Friday the 16th.
Reply
Old Jan 5, 2009 | 10:31 AM
  #200  
MazdaManiac's Avatar
Banned
iTrader: (3)
 
Joined: Oct 2003
Posts: 16,386
Likes: 28
From: Under my car
"Last Call" for AP orders is Thursday.
If you want/need on, get on it.
Reply


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 02:30 PM.