MINNESOTAns where are you?
#2351
MadeULook, hey, I saw you this morning on 694E. I was in my beat up black Corolla driving next to you. I didn't know you remember me but at least you waved at me. Nice looking car man. We should meet up sometime. I haven't seen you for a while now since last time you came over to my house.
Check out my in car Video during street tuning with Chris on the link below.
http://videos.streetfire.net/video/R...rbo_721360.htm
Check out my in car Video during street tuning with Chris on the link below.
http://videos.streetfire.net/video/R...rbo_721360.htm
Last edited by Luckycat; 11-24-2009 at 10:38 AM.
#2353
The AZN Dude
Join Date: Feb 2008
Location: Minnetonka, Minnesota
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
5w10, 5w20, 5w30.... in the winter will pretty much operate the same in winter...
viscosity levels are rated lowest to highest by ascending number (1,2,3,4 etc)
5w10, 5w20, 5w30 are all multi grade... so the oil can change viscosity. when its 10 degrees out it will have low viscosity and will be easier to start (less thick) that's where the 5w comes in so all those oils are in a sense the same. the 10,20, or 30 more applied in warmer temps.
you want thicker in warmer temps and thinner in lower temps.
gotta love minnesota though, the only reason we see multi-grade oils on the shelf is cause we live in a four season climate change, so our oil can change without having to change oil every time the temp drops or raises.
#2355
Thanks man. The car was tuned on old plugs. It also runs very rich at the moment. I replaced old plugs with new plugs and stored the car for the winter. Will get the car tunes in spring when the weather is more reasonable. I am thinking of install a manual boost controller and get it to boost around 12 psi. Right now it only runs at 8 psi or so.
#2356
The AZN Dude
Join Date: Feb 2008
Location: Minnetonka, Minnesota
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Thanks man. The car was tuned on old plugs. It also runs very rich at the moment. I replaced old plugs with new plugs and stored the car for the winter. Will get the car tunes in spring when the weather is more reasonable. I am thinking of install a manual boost controller and get it to boost around 12 psi. Right now it only runs at 8 psi or so.
and i wish i had the luxury of storing mine for winter... winter tires and 120lbs in trunk works very well though!!
#2357
I agree with you on the 12 psi. Right now I am satisfy with 8 psi. I may change my mind later. I just want to have a quick car that I enjoy driving and not having headache later on. Will see. I may just put on boost controller and leave it at 10 psi.
You should spend some money and get yourself a beater. I have a corolla that got for $1600. That is money well spend for me. Good gas mileage and always start up every time no matter how hot or how freaking cold it is. I just look like a dumb *** when I drive that car. People just give me funny look but what the heck I just don't care.
#2359
hey guys i was wondering if anyone had or know someone who has the odbII device?? The one that plugs into the car computer to check the cel cause yea.... i have a cel and Morries want 148 bucks just to plug my car in. Thanks for any info guys.
#2360
0110100001101001
Join Date: Nov 2007
Location: Minneapolis
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Otherwise, if you're near Crystal, I have one and can help you out.
--Ivan
Last edited by iaus10; 01-02-2010 at 06:53 PM.
#2361
Registered
Hey, I am in New Hope and have an Access Port.
Let me know if you need to use it.
Let me know if you need to use it.
#2362
Registered User
Join Date: Nov 2005
Location: Minnesota
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Hi guys. I'll re-introduce myself since I just officially joined the 8 club once again today.
I need to pick up a set of winters (rims + tires) so let me know if anyone has either a set of winters or even a set of 17 rims FS. I saw some winters craigslist tonight but I'm guessing the winter tread is probably gone since they have 18k miles on them already, and the snow compound only goes down about half way.
I need to pick up a set of winters (rims + tires) so let me know if anyone has either a set of winters or even a set of 17 rims FS. I saw some winters craigslist tonight but I'm guessing the winter tread is probably gone since they have 18k miles on them already, and the snow compound only goes down about half way.
#2363
Resident Cool Guy
iTrader: (2)
Join Date: Jul 2009
Location: MN and AZ
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
hey guys, a buddy of mine does custom car audio install and he just installed the Metra Kit and a 7inch pioneer headunit in my car and hooked it up really well and made everything work. If anyone needs some help with audio install he is probably cheaper than audio shops around the cities. He is working on custom sub enclosures for maximum trunk space and all new speakers to replace the Bose system in my 8. Just letting you know if anyone needs a local hand at their cars audio.
#2365
Registered User
Join Date: Nov 2005
Location: Minnesota
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, just couldn't stay away :-) I got an '04 with 33k miles- base model. I had to give up the sunroof to be more comfortable with the headroom situation.
So my passenger tail light has condensation.. after reading around the forums on this subject it's apparent people have strong opinions on this one way or another lol. Anyone locally done a fix for this and had it work?
So my passenger tail light has condensation.. after reading around the forums on this subject it's apparent people have strong opinions on this one way or another lol. Anyone locally done a fix for this and had it work?
#2366
Yeah, just couldn't stay away :-) I got an '04 with 33k miles- base model. I had to give up the sunroof to be more comfortable with the headroom situation.
So my passenger tail light has condensation.. after reading around the forums on this subject it's apparent people have strong opinions on this one way or another lol. Anyone locally done a fix for this and had it work?
So my passenger tail light has condensation.. after reading around the forums on this subject it's apparent people have strong opinions on this one way or another lol. Anyone locally done a fix for this and had it work?
#2367
Registered
If you have the warranty still they will replace them for free. I ended up getting 3 sets from mazda before i got a set that didnt leak water. I ended up blacking the tails out anyways so they could still leak and i wouldnt know. pretty sure they dont anymore tho
#2368
Registered
iTrader: (1)
Join Date: Mar 2005
Location: New Prague, MN
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Last year was the first time that mine had developed condensation in the lights. I'm not sure what I'm going to do about it yet.. but the gasket kit was insanely expensive from Mazda via Walser > $100.. I'm going to have to see if I can do something myself instead..
But for now she's parked in the garage hybernating..
But for now she's parked in the garage hybernating..
#2370
The AZN Dude
Join Date: Feb 2008
Location: Minnetonka, Minnesota
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
anyone want to fix my climate control unit? lol heat does not want to work.... the heater will work, but then automatically shuts off and i have to turn the **** to cold and back to hot back and forth to work again.
#2372
Registered
iTrader: (1)
Join Date: Mar 2005
Location: New Prague, MN
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Tony, it may be the actuator or the switch. If it's still under warranty have the dealer fix it. If it's not.. it could get pricey!
My 2004 did that.. they found out the actuator was bad.. after replacing the switch. If you are in the car.. head down by the gas pedal.. look up to the center console.. when someone turns the heat, you should see the actuator open and close... If this isn't happening to match the switch then the problem is either a bad switch or bad actuator..
My 2004 did that.. they found out the actuator was bad.. after replacing the switch. If you are in the car.. head down by the gas pedal.. look up to the center console.. when someone turns the heat, you should see the actuator open and close... If this isn't happening to match the switch then the problem is either a bad switch or bad actuator..
#2373
Registered
iTrader: (1)
Join Date: Mar 2005
Location: New Prague, MN
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Groo, I like Walser in Burnsville for their service department. The only part of Walser I don't like is the finance vampires that you have to deal with if you buy a car there.
So far I've found their parts and labor rate prices to be reasonable.. (at the worst, no worse then anyone else.)
So far I've found their parts and labor rate prices to be reasonable.. (at the worst, no worse then anyone else.)
#2374
The AZN Dude
Join Date: Feb 2008
Location: Minnetonka, Minnesota
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Tony, it may be the actuator or the switch. If it's still under warranty have the dealer fix it. If it's not.. it could get pricey!
My 2004 did that.. they found out the actuator was bad.. after replacing the switch. If you are in the car.. head down by the gas pedal.. look up to the center console.. when someone turns the heat, you should see the actuator open and close... If this isn't happening to match the switch then the problem is either a bad switch or bad actuator..
My 2004 did that.. they found out the actuator was bad.. after replacing the switch. If you are in the car.. head down by the gas pedal.. look up to the center console.. when someone turns the heat, you should see the actuator open and close... If this isn't happening to match the switch then the problem is either a bad switch or bad actuator..
warranty through Ford dealer... but 100 dollars, and CAI, no cat, and exhaust... they might not like that....
#2375
Groo, I like Walser in Burnsville for their service department. The only part of Walser I don't like is the finance vampires that you have to deal with if you buy a car there.
So far I've found their parts and labor rate prices to be reasonable.. (at the worst, no worse then anyone else.)
So far I've found their parts and labor rate prices to be reasonable.. (at the worst, no worse then anyone else.)
Ugh, don't take your RX8 to Walser. Two bad experiences, here is one:
https://www.rx8club.com/showpost.php...postcount=2293