4.777 Ring & Pinion in Stock
#1
4.777 Ring & Pinion in Stock
Brand new 4.777 Ring & Pinion in stock for the RX8. Priced at $625. Can be ordered directly from our website...http://mazmart.com/PartsList.aspx?id=36&n=NEW&m=6 1 remaining!!!
Last edited by MAZMART "6"; 03-16-2009 at 07:31 AM.
#6
9000rpm later
iTrader: (-1)
Join Date: Feb 2008
Location: New Hampshire
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
i called a couple mazda dealers and they seemed unsure as to whether or not, if they actually found this rear swap had been done, they would void a warranty due to it lol. it's been keeping me on the edge, because i've wanted to do this swap bad.
#7
Paul.
#9
#11
Being (new) single rocks!
Join Date: Mar 2008
Location: Toronto, Ontario, Canada
Posts: 1,485
Received 0 Likes
on
0 Posts
Has anyone seen one of these actually installed in an 04-08? Have any of your customers done it Mazmart? Would love to speak to them. I am told that it will "likely" work but it is not 100 % certain that it will.
#12
We've installed the FEED 4.777 and that was not designed to be in the RX8, with an adaptor around the pinion and a huge spacer for the ring gear that was not flat that we had to machine flat and hardware that was definitely not Mazda. This, on the other hand was designed to be in an RX8 differential. I don't see much chance of a problem. I've sold 2 of these 09 r&p to a member of this club who lives in the Caribbean and speaks spanish as his first language. If he chooses to respond then you'll get your answer, otherwise there's only one left at this price.
Paul.
#13
Being (new) single rocks!
Join Date: Mar 2008
Location: Toronto, Ontario, Canada
Posts: 1,485
Received 0 Likes
on
0 Posts
^ Thanks for the reply.
I hope he responds as I would like to know whether it can be dropped in without any modification like you had to do with the FEED unit.
I got a local quote of $500 to install but no guarantee it will work without modification and who knows what that would add to the price.
Assuming no modification, how much should I expect to pay for installation?
I hope he responds as I would like to know whether it can be dropped in without any modification like you had to do with the FEED unit.
I got a local quote of $500 to install but no guarantee it will work without modification and who knows what that would add to the price.
Assuming no modification, how much should I expect to pay for installation?
#15
I'll snap his neck.
We've installed the FEED 4.777 and that was not designed to be in the RX8, with an adaptor around the pinion and a huge spacer for the ring gear that was not flat that we had to machine flat and hardware that was definitely not Mazda. This, on the other hand was designed to be in an RX8 differential. I don't see much chance of a problem. I've sold 2 of these 09 r&p to a member of this club who lives in the Caribbean and speaks spanish as his first language. If he chooses to respond then you'll get your answer, otherwise there's only one left at this price.
Paul.
Paul.
#16
Being (new) single rocks!
Join Date: Mar 2008
Location: Toronto, Ontario, Canada
Posts: 1,485
Received 0 Likes
on
0 Posts
Was kind of hoping that the 09 RX8 diff could be used without the need for all of the extra work required to get the FEED unit to. That's the feedback that is missing for me at this point.
#17
Registered
Join Date: Mar 2003
Location: Santiago, Dominican Republic
Posts: 2,525
Likes: 0
Received 0 Likes
on
0 Posts
Hi guys, Im the one that Paul is talking about, one of the 4.77 sets is allready install and tested but in a FD rx-7, this car used to have a 4.44 from a 2006 RX-8 you only have to get some side spacers that fit the backlash of the dif, but that is for an rx-7, but I did used the same spacers for the 4.44 and the 4.77
the RX-8 I will give you an answer in a couple of minutes, Im trying to get in contact with my mecanic
the RX-8 I will give you an answer in a couple of minutes, Im trying to get in contact with my mecanic
#18
#20
Thread
Thread Starter
Forum
Replies
Last Post
duworm
Series I Wheels, Tires, Brakes & Suspension
1
10-01-2015 04:57 PM