Notices

New MazdaManiac BASE Calibrations

Thread Tools
 
Rate Thread
 
Old Nov 2, 2009 | 07:01 PM
  #2251  
Jon316G's Avatar
Grasshopper
iTrader: (1)
 
Joined: Dec 2006
Posts: 6,779
Likes: 50
From: Streetsboro, OH
Originally Posted by Flashwing
Jon's symptoms sound exactly like what I have been dealing with and there really wasn't anything different I could see between the two machines that would prompt one to connect to the AP but not the other. The AP would power up on the USB cord but there would be no "reconnect" option to connec to the PC.
I have a Win7 desktop that has no issues with the AP.
Though I did do a clean install with my desktop and the laptop was upgraded.

But I also noticed that I didn't have the "reconnect" option.
The AP powered up as if it was plugged into my car with the basic menus.
Reply
Old Nov 3, 2009 | 03:07 PM
  #2252  
Mr.Rexx's Avatar
Rotary User
 
Joined: Sep 2009
Posts: 44
Likes: 0
From: Chicagoland
I submited my idle, steady and base calibration file Yesterday evening. How long does it usually take to get the confirmation e-mail back?
Reply
Old Nov 3, 2009 | 03:12 PM
  #2253  
jsjjr's Avatar
His 8
iTrader: (1)
 
Joined: Feb 2009
Posts: 381
Likes: 0
From: Leander, Tx
Originally Posted by Mr.Rexx
I submited my idle, steady and base calibration file Yesterday evening. How long does it usually take to get the confirmation e-mail back?
Usually a couple of days to 5 days max.. It'll come.
Reply
Old Nov 3, 2009 | 03:14 PM
  #2254  
jsjjr's Avatar
His 8
iTrader: (1)
 
Joined: Feb 2009
Posts: 381
Likes: 0
From: Leander, Tx
nm


nm
Reply
Old Nov 3, 2009 | 09:22 PM
  #2255  
MazdaManiac's Avatar
Thread Starter
Banned
iTrader: (3)
 
Joined: Oct 2003
Posts: 16,386
Likes: 28
From: Under my car
Depends.
Usually within 2 days.
However, I am in Vegas at SEMA, as is Hund, so it will probably be delayed until Thursday or Friday.
Reply
Old Nov 3, 2009 | 09:54 PM
  #2256  
09Factor's Avatar
Original Turbo 'd Auto !!
 
Joined: Mar 2004
Posts: 2,136
Likes: 5
From: Surprise, Arizona
^^^^I want to see pics of her (Hund) next to some hot cars and parts.
Reply
Old Nov 4, 2009 | 11:22 AM
  #2257  
Mr.Rexx's Avatar
Rotary User
 
Joined: Sep 2009
Posts: 44
Likes: 0
From: Chicagoland
Question (It seems like I'm asking a lot of them...)
I'm planning to install the RB dual resonated mid-pipe sometime in the Spring. Will I be able to get different calibration then? (I'm assuming that it has to different with the Mipipe?)
Reply
Old Nov 4, 2009 | 11:33 AM
  #2258  
Jedi54's Avatar
Administrator
iTrader: (7)
 
Joined: Mar 2004
Posts: 22,600
Likes: 3,455
From: The Dark Side
it doesn't HAVE to be different but with a midpipe you can lean out the AFR's a bit more to maximize the potential of the midpipe. (don't have to worry about burning up the Cat)

Rexx: the RB pipe is nice but have you looked into the BHR resonated MP?
Reply
Old Nov 5, 2009 | 10:33 AM
  #2259  
L337fpc's Avatar
ლ(ಠ益ಠლ)
iTrader: (4)
 
Joined: Sep 2008
Posts: 2,368
Likes: 6
From: Franeke
Logs sent.

I have a question that I couldn't find a straight foreword answer after days of searching....

I plan on going turbo within the next 6-12 months. I want to use the MM FI maps. My question is in regards to using a Electronic Boost Controller while untuned/waiting for the next tune. Should i have my EBC turned as low as possible while tuning? Or should I keep it constant, lets say 5-8psi during tuning.

The turbo I have my eyes on is the MM Garret turbo (i know its limited availability).
Reply
Old Nov 5, 2009 | 11:07 AM
  #2260  
Derex'8's Avatar
ReDuX
iTrader: (4)
 
Joined: Oct 2006
Posts: 918
Likes: 0
From: Norfolk, VA
Hey Jeff Sent you a email in regards to my new setup, just need a new startup calibration so we can finally move forward!
Reply
Old Nov 5, 2009 | 04:27 PM
  #2261  
czar's Avatar
Almost boosted
iTrader: (3)
 
Joined: May 2008
Posts: 708
Likes: 1
From: Austin, Texas
hey jeff, can you confirm or deny if your getting my emails? I sent them to the address you had on the invoice but haven't heard back.
Reply
Old Nov 7, 2009 | 09:35 AM
  #2262  
AllPurposeBen's Avatar
Rotary Death Blender
 
Joined: Oct 2009
Posts: 7
Likes: 0
From: Overland Park, Kansas
Does the 6 months of free adjustment start from date of purchase of my AP or from my first submission of a datalog?
Reply
Old Nov 8, 2009 | 08:04 PM
  #2263  
Derex'8's Avatar
ReDuX
iTrader: (4)
 
Joined: Oct 2006
Posts: 918
Likes: 0
From: Norfolk, VA
Originally Posted by Derex'8
Hey Jeff Sent you a email in regards to my new setup, just need a new startup calibration so we can finally move forward!

hopefully I can get that startup calibration here soon
Reply
Old Nov 8, 2009 | 09:35 PM
  #2264  
saabstoc's Avatar
Registered
 
Joined: Nov 2009
Posts: 11
Likes: 0
From: bayarea, CA
hi jeff:
i got a received confirmation on my last logs on oct 9. prior to this, i was not registered on this forum. i had no way of contacting you so i emailed you on weeks # 2 and 3. i am afraid you have put me on the bottle of the list now. it has been one month now, so can you look me up and see how we are doing? i am saabstoc@aol.com. thank you.
Reply
Old Nov 8, 2009 | 11:27 PM
  #2265  
PhantomRX-8's Avatar
Bad Ass
iTrader: (1)
 
Joined: May 2008
Posts: 450
Likes: 0
From: Kyle, Tx
Originally Posted by saabstoc
hi jeff:
i got a received confirmation on my last logs on oct 9. prior to this, i was not registered on this forum. i had no way of contacting you so i emailed you on weeks # 2 and 3. i am afraid you have put me on the bottle of the list now. it has been one month now, so can you look me up and see how we are doing? i am saabstoc@aol.com. thank you.
A month is pretty typical now a days. My last tune was a little over a month.
Reply
Old Nov 14, 2009 | 03:31 PM
  #2266  
MFslacker22's Avatar
Registered
 
Joined: May 2009
Posts: 178
Likes: 0
Since its been about 3 months and i've only received one tune, I am a little worried about driving my car. I no longer have a second car to drive and am wondering if it will be ok to drive the rx8. Im currently running my 4.0.1 tune and i need to drive the car 4 hours away. Will it be ok to drive it for this long with that tune?
Reply
Old Nov 14, 2009 | 03:34 PM
  #2267  
Jedi54's Avatar
Administrator
iTrader: (7)
 
Joined: Mar 2004
Posts: 22,600
Likes: 3,455
From: The Dark Side
Originally Posted by AllPurposeBen
Does the 6 months of free adjustment start from date of purchase of my AP or from my first submission of a datalog?
I believe it's from purchase date
Originally Posted by MFslacker22
Since its been about 3 months and i've only received one tune, I am a little worried about driving my car. I no longer have a second car to drive and am wondering if it will be ok to drive the rx8. Im currently running my 4.0.1 tune and i need to drive the car 4 hours away. Will it be ok to drive it for this long with that tune?
you should be fine to drive on the 4.01 map as long as your idle and fuel trims appear to be in order.
you could always flash back to the OEM map for the road trip if you're concerned. (assuming you're not FI)
Reply
Old Nov 14, 2009 | 04:08 PM
  #2268  
MFslacker22's Avatar
Registered
 
Joined: May 2009
Posts: 178
Likes: 0
Originally Posted by Jedi54


you should be fine to drive on the 4.01 map as long as your idle and fuel trims appear to be in order.
you could always flash back to the OEM map for the road trip if you're concerned. (assuming you're not FI)
I am FI. How do i know if my idle and fuel trims are ok?
Reply
Old Nov 14, 2009 | 04:21 PM
  #2269  
Jedi54's Avatar
Administrator
iTrader: (7)
 
Joined: Mar 2004
Posts: 22,600
Likes: 3,455
From: The Dark Side
idle you'll be able to feel
fuel trims you can watch on your AP. check your STFT at idle.
Reply
Old Nov 14, 2009 | 04:24 PM
  #2270  
MFslacker22's Avatar
Registered
 
Joined: May 2009
Posts: 178
Likes: 0
Originally Posted by Jedi54
idle you'll be able to feel
fuel trims you can watch on your AP. check your STFT at idle.
yeah I know to check them but what am I looking for?
Reply
Old Nov 15, 2009 | 01:10 AM
  #2271  
gregs's Avatar
Pull My Finger
iTrader: (7)
 
Joined: Jul 2007
Posts: 1,786
Likes: 19
From: So.Cal
Jeff, im planning on installing my 820cc injectors in the p2 position for the next tuning/dyno day..do you have a base map for this setup i can flash to? hopefully this will be good enough without changing anything else in the fuel system..if there are any other suggestions let me know
Reply
Old Nov 15, 2009 | 01:40 AM
  #2272  
czar's Avatar
Almost boosted
iTrader: (3)
 
Joined: May 2008
Posts: 708
Likes: 1
From: Austin, Texas
two months from the year mark any status of my turbo upgrade?, and ive sent a email to your email on the invoice and your ap and your greddy upgrade kit email with no replys
Reply
Old Nov 16, 2009 | 09:22 AM
  #2273  
longpath's Avatar
Registered
iTrader: (1)
 
Joined: Apr 2005
Posts: 631
Likes: 3
From: Stamford, CT
Originally Posted by MazdaManiac
(BTW - Who the hell uses a Mac these days?)
Actually, I do. Not only do I use a Mac; but I support them in a business that uses them for HD video editing in a production television environment where they are vastly more cost-effective than any other competing platform for professional HD video editing (price an Avid configured for HD editing if you don't believe me).

I checked out this thread because I was concerned that perhaps the tools being used to create, edit, load maps to the AP device might be platform specific and specifically not include any of the platforms I use (NetBSD, Solaris, and MacOS X), and seeing the above comment leads me to suspect that perhaps an AP might not be for me after all, which is rather disappointing.
Reply
Old Nov 16, 2009 | 10:29 AM
  #2274  
MazdaManiac's Avatar
Thread Starter
Banned
iTrader: (3)
 
Joined: Oct 2003
Posts: 16,386
Likes: 28
From: Under my car
If a Mac cannot run Windows software competently in some sort of emulation mode, it is pretty useless as a general purpose computing device.

Having worked in arts and entertainment for over two decades, I was continually dismayed at the Apple-centric world view that music and video editors took.
I'm well aware of the price of Avid editors - as I am of Toaster, Edge, Turtle, ProTools, etc.
I've worked with them all (and owned Apple IIc, IIg, iMac, etc.) and always had to shake my head ruefully.
It is a market that was deftly manipulated by taking advantage of the ego/stupidity combination that typifies the media editor mindset.
There is a reason Adobe went from porting Apple software to the PC to writing PC software and then porting it back to the Mac.

Its a shame that tools are purchased with an iDumb mentality these days, but that is where Apple has succeeded in marketing and that is what we have to accept.

If you are a real-world person, you need a PC - even if you need a Mac in your play world.

All that aside, there have been people that have gotten the software to work on the Mac. Check out the Cobb WEB site.
I do not offer support for user issues like compatibility with your computing hardware.
Reply
Old Nov 16, 2009 | 10:55 AM
  #2275  
Jon316G's Avatar
Grasshopper
iTrader: (1)
 
Joined: Dec 2006
Posts: 6,779
Likes: 50
From: Streetsboro, OH
Originally Posted by MazdaManiac
Its a shame that tools are purchased with an iDumb mentality these days
I absolutely love this quote

Coming from someone who learned non-linear video editing on Macs using Final Cut Pro back in school, I can tell you that I saw no reason to stay with Macs afterward and now do editing on Windows.
Even got rid of my Macbook Pro because I never used it.
So I can understand where Jeff is coming from on his previous statement.

That said, I think Apple products are real nice, but shouldn't be considered the "default" system to get if you're into any kind of business or editing field.

...stepping off the soapbox now...
Reply


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 09:44 PM.