Cobb AccessPORT Discussion
#5177
Guest
Posts: n/a
Still waiting on Cobb to send me my first batch of Euro-spec and Asian-spec AccessPORTs.
They are trying to integrate all of the international firmware into one package as well as the software.
I had expected to receive them yesterday (as that is the date they gave me), but I haven't gotten a confirmation of that yet.
I don't think its more than a few more days off.
They are trying to integrate all of the international firmware into one package as well as the software.
I had expected to receive them yesterday (as that is the date they gave me), but I haven't gotten a confirmation of that yet.
I don't think its more than a few more days off.
#5179
Administrator
iTrader: (7)
Everybody should also make sure they're on the newest firmware.
#5182
Life begins @ 30 psi
Join Date: Mar 2008
Location: Columbia, MD
Posts: 1,745
Likes: 0
Received 0 Likes
on
0 Posts
Will the firmware updates work fine with your base maps? I'm still running on a base map as I'm in the queue for an updated map. If so, I'll plug my AP in today and make sure I'm up to date.
#5185
Are we having fun yet?
Join Date: Feb 2003
Location: Conn., USA
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Sorry in advance about not wanting to scroll through 5166 posts for this but, do people who have used the Cobb stage 1 software upgrade feel its been worthwhile? I've used Cobb on my Subarus with very good experiences, but I wonder how much difference there is on a normally aspirated engine.
Thanks.
Thanks.
#5188
Registered
iTrader: (1)
Join Date: Nov 2006
Location: Los Angeles
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
It should however make the power delivery smoother because Cobb spent a lot of development time getting rid of those two dips in the power band where our intricate intake system opens up for more breathing.
Look at how much smoother the Cobb graph is...
Look at how much smoother the Cobb graph is...
#5189
#5190
I would take that dynograph with a grain of salt. That tune is designed for a general car application and not tailored to your specific vehicle. The best gains will only be seen with personal tuning for your car.
#5191
I installed the Stage 1 tuning map once when my MM tune was a tad too lean. Never again. After driving around with it for some days I was going to try flooring it a bit, had my AP connected, but I saw the numbers bouncing over 16 on WOT and pulled over quite quickly and went back to a sane map :P
#5192
Second car, first rotary.
Hi,
Any Euro users installed their AP's yet and did you have any issues? I have two issues:
when trying to update the AP firmware with the updater I get the message that I am on the latest firmware and no update is necessary, however the firmware version displayed appears to be lower (older) that the one Jeff says is latest in the first post
When I select Install from the menu with the key in the On position, I get the error "Unsupported vehicle. This version of the AP does not support your current vehicle", something like that. I tried several times, verified the cables etc etc same thing every time.
PS: how do you update the firmware for the dongle?
Any Euro users installed their AP's yet and did you have any issues? I have two issues:
when trying to update the AP firmware with the updater I get the message that I am on the latest firmware and no update is necessary, however the firmware version displayed appears to be lower (older) that the one Jeff says is latest in the first post
When I select Install from the menu with the key in the On position, I get the error "Unsupported vehicle. This version of the AP does not support your current vehicle", something like that. I tried several times, verified the cables etc etc same thing every time.
PS: how do you update the firmware for the dongle?
#5193
hakuna matata!
iTrader: (41)
i got a Fatal Error.. now my AP is unusable.
ugh.
i didn't upgrade the firmware or anything.... i turned the car off.. unplugged it.. then a few hours later I plug it in and this is what i get..
Jeff.. it says I need an invoice to make a claim for warranty repair.. so do I go through you about it or call Cobb directly?
ugh.
i didn't upgrade the firmware or anything.... i turned the car off.. unplugged it.. then a few hours later I plug it in and this is what i get..
Jeff.. it says I need an invoice to make a claim for warranty repair.. so do I go through you about it or call Cobb directly?
Last edited by alz0rz; 02-09-2009 at 05:10 PM.
#5194
Administrator
iTrader: (7)
you were using the old firmware which had issues in it
#5195
Administrator
iTrader: (7)
you'll need to contact Cobb to RMA it, you'll ship it to them, the'll transfer the data onto another AP and send it to you
#5196
Registered User
Join Date: Jan 2009
Location: Belfast, Northern Ireland, UK
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
European, Australian and Asian Market Users:
Please be sure to download the "BETA" version of the firmware to ensure your models are supported.
Go to your AccessPORT updater software. Go to the “Tools” drop down menu and make sure the “beta” firmware options are checked.
Restart the updated and then connect your AccessPORT.
#5198
Second car, first rotary.
#5199
Registered User
Join Date: Jan 2009
Location: Belfast, Northern Ireland, UK
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Just to make sure, plug your AccessPort into the car and go to the AccessPort tab. Does it give you the following information?
Firmware: v1.3.2.0-8841
Dongle Info: v0.47
If yes and it still doesn't work, then you'll probably need to query it with Jeff. If you can't even connect it to car at all, check it via connecting to the PC. When I first connected the AccessPort to my car, it updated the dongle and then I was able to choose Install for the EUDM map. It specified that my car is a EUDM 2005-2008 RX-8, which is right as mine is a UK-spec 2007 model.
Firmware: v1.3.2.0-8841
Dongle Info: v0.47
If yes and it still doesn't work, then you'll probably need to query it with Jeff. If you can't even connect it to car at all, check it via connecting to the PC. When I first connected the AccessPort to my car, it updated the dongle and then I was able to choose Install for the EUDM map. It specified that my car is a EUDM 2005-2008 RX-8, which is right as mine is a UK-spec 2007 model.
Last edited by Kay; 02-10-2009 at 05:16 AM.
#5200
Second car, first rotary.
Just to make sure, plug your AccessPort into the car and go to the AccessPort tab. Does it give you the following information?
Firmware: v1.3.2.0-8841
Dongle Info: v0.47
If yes and it still doesn't work, then you'll probably need to query it with Jeff. If you can't even connect it to car at all, check it via connecting to the PC. When I first connected the AccessPort to my car, it updated the dongle and then I was able to choose Install for the EUDM map. It specified that my car is a EUDM 2005-2008 RX-8, which is right as mine is a UK-spec 2007 model.
Firmware: v1.3.2.0-8841
Dongle Info: v0.47
If yes and it still doesn't work, then you'll probably need to query it with Jeff. If you can't even connect it to car at all, check it via connecting to the PC. When I first connected the AccessPort to my car, it updated the dongle and then I was able to choose Install for the EUDM map. It specified that my car is a EUDM 2005-2008 RX-8, which is right as mine is a UK-spec 2007 model.