Austin/Cedar Park/Leander 8's
#453
Bad Ass
iTrader: (1)
Join Date: May 2008
Location: Kyle, Tx
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
Hey there, welcome. Some of us meet up at the 360/183 car show in the best buy parking lot on saturdays. My car is still under construction but I stll drive up there to chat with everyone. Hoping to knock out a lot on the car this week. Im getting married in 2 weeks and Im hoping the car will be "running" by that time so when I get home, all I have to do it tune. Im gonna try and work on it at nights a little more since Im rounding the home stretch of the install. Im sure I can get the piping run with a halogen lamp!
#454
Almost boosted
iTrader: (3)
aggg
anyone want to buy a greddy profecb boost controller ?
Its the older one with the two dials. I have two, a new profec and this older unit. Wanted to see if anyone local wanted it before i post it up some where
any idea why my car seemed to almost stall today? sitting at a light and then rpm dropped almost stalled then bounced back up. the coils and wires and plugs are all pretty new. Guess it maybe time to use my new compression tester tool
anyone want to buy a greddy profecb boost controller ?
Its the older one with the two dials. I have two, a new profec and this older unit. Wanted to see if anyone local wanted it before i post it up some where
any idea why my car seemed to almost stall today? sitting at a light and then rpm dropped almost stalled then bounced back up. the coils and wires and plugs are all pretty new. Guess it maybe time to use my new compression tester tool
Last edited by czar; 06-26-2009 at 08:38 AM.
#455
Bad Ass
iTrader: (1)
Join Date: May 2008
Location: Kyle, Tx
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
What do you want for it? I was thinking about going with the Blitz one cause it has 4 boost settings but money is tight right now so if its a good deal, Ill just go with yours. Do you have a model number so I can get some info on it?
#457
Bad Ass
iTrader: (1)
Join Date: May 2008
Location: Kyle, Tx
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
Do you think the w/g control would give any clearance issues considering how tight that area is??
#461
WHat time is the "car show"? Thinking I might bring out my little stock 8 to look at what shows up. Really wanting to stop by that new Lotus/Aston Martin/Bently dealership off 183N between Anderson Mill and McNiel, some noce rides to look at there.
#463
Bad Ass
iTrader: (1)
Join Date: May 2008
Location: Kyle, Tx
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
Everyone usually leave 1431/183 around 9:45 and arrive at 360/183 around 10 or so. I was going to go up but not sure I am anymore. Depends on what I can get done on the car in the next couple hours, and if I can get a boost controller hooked up!
#465
Steering Wheel emblem
Didnt make it out last night. Was too busy drinking a throwing darts and time got away... ANyway, I was searching the forums today and havent found anything specific to the steering wheel. I'm about sick of the blinding reflection off the mazda emblem stuck to the steering wheel. Has anyone taken that thing off and if so, wat would be the best method for removal. I cant even get a finger nail under that thing to see if i can pry it off. Gonna pull the horn fuse and start chizzling with a flat head before its all over I'm betting...
#466
Bad Ass
iTrader: (1)
Join Date: May 2008
Location: Kyle, Tx
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
Yes but that was a very important nut that was chizzling away at my patience!! Didnt do much after you left cause we went and got dinner. Hoping today to get at least most of the pipe ran if not all of it. Id like to fire the car up tomorrow or tuesday, depends on how fast I can get the b/c plumbed and situated.
#468
Has anyone been to this dealership I was wondering if they had a austin healey 3000 my math teacher had 3 and a teen and I just wanted to know mabye if they had one.. but uh is the car show friendly? I dont need any haters cause my car is stock haha
#469
Bad Ass
iTrader: (1)
Join Date: May 2008
Location: Kyle, Tx
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
I need your little hands again! lol! Trying to put the actuator on and I cant get the top freaking screw in. Its right in the middle of the 2 water barbs so its a very tight fit, and when you finally get your hand in there, the hinge of the wastegate digs into the palm f your hand! Dude, my left hand is all kinds of swollen right now! I got one screw on, cant get the other. Put the suction pipe on but I think its on upside down. It curves to the left, I think its supposed to go to the right.
#470
Almost boosted
iTrader: (3)
i can try to come by after work around 6, no promises though. Be awesome to get the beast done. did u ever tighten that nut that i got on? your wrench had confused me why i let u tighten it.
after tuesday i am off to San Antonio for vacation with the girl.
anyone know of anything fun to do down there?
after tuesday i am off to San Antonio for vacation with the girl.
anyone know of anything fun to do down there?
Last edited by czar; 06-28-2009 at 11:32 PM.
#471
Bad Ass
iTrader: (1)
Join Date: May 2008
Location: Kyle, Tx
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
i can try to come by after work around 6, no promises though. Be awesome to get the beast done. did u ever tighten that nut that i got on? your wrench had confused me why i let u tighten it.
after tuesday i am off to San Antonio for vacation with the girl.
anyone know of anything fun to do down there?
after tuesday i am off to San Antonio for vacation with the girl.
anyone know of anything fun to do down there?
We go to San Antonio when my parents come into town annually and we just usually go to Sea World. Weve been meaning to check out the Alamo and the Riverwalk, but just havent made it down there yet.
#472
Hey guys, I'm a student at UT and I've always loved the rx-8. Now that I actually have enough money to buy a used one I've been doing a lot of research and I'm super confused. Most of my confusion results from the differing opinion on the need to rebuild the rotary engine after a certain amount of mileage. Some people say that this is a very rare occurrence and with proper care can be avoided. Others say that the rebuild is completley neccessary. The second sentiment is renforced by the fact that a majority of the rx-8s on craigslist have a rebuilt engine. So I figured what better place to get a definitive answer then from fellow austinite rx-8 lovers! Thanks for your help.
#473
His 8
iTrader: (1)
Join Date: Feb 2009
Location: Leander, Tx
Posts: 381
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys, I'm a student at UT and I've always loved the rx-8. Now that I actually have enough money to buy a used one I've been doing a lot of research and I'm super confused. Most of my confusion results from the differing opinion on the need to rebuild the rotary engine after a certain amount of mileage. Some people say that this is a very rare occurrence and with proper care can be avoided. Others say that the rebuild is completley neccessary. The second sentiment is renforced by the fact that a majority of the rx-8s on craigslist have a rebuilt engine. So I figured what better place to get a definitive answer then from fellow austinite rx-8 lovers! Thanks for your help.
Suffice to say, not all '04-'05 cars will have a problem. Some guys still have their original engines...
Also, read threads on PRE-MIXING and which type of OIL to use. There are a lot of differing opinions on that...read and be informed. You'll love the car though..
-PreMix
-Check your Oil
-Change your Oil (on time and more often than the dealer recc.)
-Enjoy the car.
#474
Bad Ass
iTrader: (1)
Join Date: May 2008
Location: Kyle, Tx
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
Ive seen some really nice low mileage 8s on Craiglist lately. Makes me really wish I didnt buy mine new, coulda save about $20k. Like jsjjr said, stay in the 06-08 range. They seem to have less problems than the pilot cars. This just me, but I wouldnt buy a used car from a dealer. Id rather meet the owner and have them explain to me how they took care of the car, especially with a rotary engine. Im getting sick of putting this turbo on so there might be another one for sale with 7000 miles!! Lol!!
#475
Almost boosted
iTrader: (3)
also i have a compression tester tool, so we can go out and check out if its got a bad engine ^_^
lol sorry phantom couldn't come over i took the oncall phone so i was stuck working ~_~
i have had a engine replacement which i think shouldnt have been replaced, kinda pissed after removing the panel above the shifter i found out the dealer broke a clip holding down the harness for the seat heaters i dont have along with the plastic that keeps the panel nice and tight, completly pissed at that, crappy dealers
lol sorry phantom couldn't come over i took the oncall phone so i was stuck working ~_~
i have had a engine replacement which i think shouldnt have been replaced, kinda pissed after removing the panel above the shifter i found out the dealer broke a clip holding down the harness for the seat heaters i dont have along with the plastic that keeps the panel nice and tight, completly pissed at that, crappy dealers