Okay, will do. I don't have it in front of me but I believe there are two AFR readings, I will check and ask specifics later.

 

I just want to say that baseline is amazing!!!
THANKS KANE!!

 

Sorry dude, I forgot about the temp thing since you're using MAP.... just saw my PM's.

Glad to hear it is working out for you!

 

so my beta version ends tomorrow...It's a sad day for me
Thanks for the program Kane! Can't wait till the final product is released

 

I'll release another this weekend.

The standalone is taking longer than I anticipated, but it is looking cool!



How is it working for you so far?

 

Looking good!

 

Like a fine wine

 

now go out and tune that beast ................................ oh wait

 

no need till I put in a cam and longtubes

 

it works fine but somehow I over shot my target a/f ratio by by a full point. I was tunning for 11.1 but repeatedly see 12.1-12.3. It might have something to do with the temp I put in while massaging the file? I didn't expect for things to run perfectly but I would hate to see that turn into a big problem when I up the boost. Right now I'm at 8psi. I might just take it to a tuner though in the next couple of months. I think I'm a little over my head here. Especially when I up the boost.

 

put some crazy dragon graphics on that thing! The final product is looking good but I'm sure will have even more changes to it before release. Keep up the good work. Will the standalone allow me to upload my larger log files?

 

Yes to log files.

As to overshooting your AFR's, which map are you running? The MAF scale or one of the fuel maps?

 

fuel map
I atctually think this might be caused by user error. I cleared a code that I wasn't paying attention to yesterday and now my af/r looks right. Once the light comes back on I can check to see if that was the issue. I'm betting it is. I have to get a new TPS. It freaks out from time to time.

 

Let's hope that it was that code, and it doesn't come back!

 

I'm excited! Looks good kane. I should be having my injectors cleaned, flow tested, and balanced soon and i will begin the tuning after. I have been reading a lot.

 

Werd man. Keep posting in this thread as you progress so I can refine things.

 

What's your projected release date on the new version? And how much?

 

I'll release another beta this weekend, it will be free.

The full retail one I am hoping to have done very very soon....

 

Let me know, free is cool but I have helped develop software in the past so I know the amount of time and work it takes to get to the finished product. I have no problem donating to the cause.

 

Cool man, let's just hope a lot of other people feel the same way! LOL

I think I have almost 20,000 man hours into this thing so far.... going to be nice to get it done.

 

I think it will be a must have for the DIY tuner. let's just hope an alternative to the AP shows up since the PT has some issues and little support.

 

NO WAY not fair
I'm going away for two weeks starting Saturday!

Can't wait to get back on this once I'm back from vacay.

Looking good Kane

 

I build engine, create injectors and MAF tables etc....

When I go to import log file from COBB ACCESS PORT, import is successful.

( I had changed the tiime in the access port log into ms as well as per instructions..)

When I go to "view selected cell" I get nothing in the "Fuel Map worksheet"

See attached screen shot. Always blank.

When I go to create new map, I get " You are going to tune 0 records in 0 min"

Tried everything???? Any ideas what I am doing wrong?

Running Windows 7 lenovo laptop, 32 bit. Office 2007 Ultimate.

Thanks.

 

Are you using the MAF scale or the fuel map worksheet?

I can't see the screen capture, can you report?

 

Hey Kane... Thanks for getting back to me.

I used the MAF scale. I copied the same paramiters from ACCESSPORT Race software....

When I click on" View selected cell" it brings up a blank fuel map worksheet.

tblMAFScale subformMAFVoltsMAFgsec0.861.960.982.901.023.271.053.651.094.061.134.491.174.981.215.521.256.081.296.661.337.271.377.921.418.631.4810.121.5611.761.6413.511.7215.471.8017.701.8820.141.9522.822.0325.782.1129.052.1932.632.2736.652.3441.112.4245.962.5453.832.6662.412.7771.852.8982.213.0193.383.13105.333.24118.103.36131.563.48145.873.59161.163.71177.563.83195.153.94214.004.06234.204.18255.744.30278.634.41302.904.49319.864.57337.434.61346.474.65355.684.69365.06

I did populate PSI/Load by "LOAD", again took the values that are in ACCESSPORT race.
I did this because the access port logs by calculated load, not manifold PSI?

RPM Scale, took numbers from ACCESSPORT Race software.

When I click on "Auto Create Fuel Map" it of course tells me that I have 0 records....

I must be missing a step or sumth?

Thanks bud.