Notices
RX-8 Racing Want to discuss autocrossing, road-racing and drag racing the RX-8? Bring it here. This is NOT a kills/street racing forum.

Anyone using the Racing Beat Race Exhaust??

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 04-02-2012, 03:46 AM
  #1  
Registered User
Thread Starter
 
Voodoo22's Avatar
 
Join Date: Mar 2012
Posts: 24
Likes: 0
Received 0 Likes on 0 Posts
Anyone using the Racing Beat Race Exhaust??

I just want to know if it is a single outlet or a dual outlet exhaust. Couldnt find any specifics or pictures to see if it was for sure or not. Looks to be single but want to make sure that it is before I purchase it.

thanks
Old 04-02-2012, 08:48 AM
  #2  
Registered
 
Aaron B's Avatar
 
Join Date: Mar 2010
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
It's a single out, on the passenger side, turned down instead of exiting through the bumper cover.
Old 04-02-2012, 07:30 PM
  #3  
Registered User
Thread Starter
 
Voodoo22's Avatar
 
Join Date: Mar 2012
Posts: 24
Likes: 0
Received 0 Likes on 0 Posts
thanks
Old 04-02-2012, 09:23 PM
  #4  
Registered
iTrader: (2)
 
GeorgeH's Avatar
 
Join Date: Oct 2003
Location: Portland OR
Posts: 1,666
Likes: 0
Received 3 Likes on 3 Posts
The soon-to-be released Corksport single-sided exhaust is supposedly lighter, but you have to trim the exhaust shroud.
Old 04-02-2012, 09:26 PM
  #5  
Registered User
Thread Starter
 
Voodoo22's Avatar
 
Join Date: Mar 2012
Posts: 24
Likes: 0
Received 0 Likes on 0 Posts
how "soon" to be released??
Old 04-02-2012, 10:09 PM
  #6  
Registered
iTrader: (2)
 
GeorgeH's Avatar
 
Join Date: Oct 2003
Location: Portland OR
Posts: 1,666
Likes: 0
Received 3 Likes on 3 Posts
https://www.rx8club.com/series-i-aftermarket-performance-modifications-23/corksport-single-exit-exhaust-220765/
Old 04-02-2012, 10:30 PM
  #7  
Modulated Moderator
iTrader: (3)
 
dannobre's Avatar
 
Join Date: Feb 2004
Location: Smallville
Posts: 13,718
Received 334 Likes on 289 Posts
One of the good things about the Racing Beat unit is the down turned exhaust tip...it helps reduce the noise.....with a regular exit it will likely be too loud

A lot of track days have 90-92dB sound limits...every little bit helps
Old 04-02-2012, 10:33 PM
  #8  
Registered
iTrader: (2)
 
GeorgeH's Avatar
 
Join Date: Oct 2003
Location: Portland OR
Posts: 1,666
Likes: 0
Received 3 Likes on 3 Posts
Yes, they did say the single is a "little" louder than their dual, which I use with a resonated/Davesport mid-pipe. That setup is fairly loud, but I've never had a problem at SCCA events. But, with a straight pipe, I'm sure it would get quite loud.
Old 04-02-2012, 10:34 PM
  #9  
BECAUSE RACECAR
iTrader: (10)
 
Arca_ex's Avatar
 
Join Date: May 2011
Location: Arizona
Posts: 1,413
Likes: 0
Received 8 Likes on 8 Posts
If you expect the turndown to help get that exhaust below 92dB then you're on crack. It is loud as hell.
Old 04-02-2012, 10:39 PM
  #10  
Modulated Moderator
iTrader: (3)
 
dannobre's Avatar
 
Join Date: Feb 2004
Location: Smallville
Posts: 13,718
Received 334 Likes on 289 Posts
Originally Posted by Arca_ex
If you expect the turndown to help get that exhaust below 92dB then you're on crack. It is loud as hell.
Believe me...it helps .....you can't do it without some resonators in the midpipe though. I have some custom ones coming to try and lower it a bit more than it is with the single resonator on it now. With a HJS CAT and 2 12" "special" resonators I think it should be good. Should know in a week or so when all the bits get here
Old 04-02-2012, 10:49 PM
  #11  
Registered
iTrader: (2)
 
GeorgeH's Avatar
 
Join Date: Oct 2003
Location: Portland OR
Posts: 1,666
Likes: 0
Received 3 Likes on 3 Posts
This thread just makes me want to make a custom exhaust with a Burns muffler...
Old 04-02-2012, 10:56 PM
  #12  
Modulated Moderator
iTrader: (3)
 
dannobre's Avatar
 
Join Date: Feb 2004
Location: Smallville
Posts: 13,718
Received 334 Likes on 289 Posts
LOL.....We used the same resonators I ordered on our FC racecar with a 3" exhaust..and managed to get it under 90dB...that is down from about 96 or so like it was before. I have high hopes it will work.....The resonators don't do much for the idle noise..but with higher flows they quiet the sound down a lot
Old 04-02-2012, 11:07 PM
  #13  
Registered User
Thread Starter
 
Voodoo22's Avatar
 
Join Date: Mar 2012
Posts: 24
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Arca_ex
If you expect the turndown to help get that exhaust below 92dB then you're on crack. It is loud as hell.
It doesnt help actually quite the exhaust it just sends the sound away from the pick up that the sanctioning body uses to measure sound levels.

When i was racing my formula mazda just turning the exhaust outlet away from the pickup i went from 103.8 Dbs to 91Db. It does make a big difference as opposed to just having a pipe shoot straight out the back.
Old 04-03-2012, 08:28 AM
  #14  
Registered
 
Aaron B's Avatar
 
Join Date: Mar 2010
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
The RB Race exhaust seems like it's louder inside the car than outside the car. Never any problems staying below SFRs 95db (when they actually check) but my ears are shot any time there's an event 2 or more hours away.

The only time I've thought the exhaust was loud outside the car was when I was standing 5 feet away from the back of the car while it was on the dyno.

FYI, that's the RB exhaust with a BHR resonated mid w/cat.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Carbon8
RX-8's For Sale/Wanted
42
02-27-2020 08:39 AM
JimmyBlack
Series I Major Horsepower Upgrades
273
02-10-2020 10:23 PM
Shnifty
Series I Tech Garage
23
12-18-2015 12:49 PM
20b-3rotor
Canada For Sale/Wanted
0
09-02-2015 08:54 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Anyone using the Racing Beat Race Exhaust??



All times are GMT -5. The time now is 07:04 AM.