Has anyone tried these coils? Just wondering since these are the same guys that are putting down 414 WHP on the turbo RX8. It's going for $395.00 ?!?! That's a pretty good price.

http://www.mazdaparts.com/ProductDetail.jsp?LISTID=54F0000-1215730739

Just wondering if anyone has tried these out yet.

looks like you have to cut the stock plugs off and solder thier ones on .
Interesting .....

looks like you have to cut the stock plugs off and solder thier ones on .
Interesting .....

Sorry not tracking can you please explain :)

I think he is trying to say they are not plug and play..you need to cut and solder/crimp the OEM harness to fit them

Ah that would make more sense. Thanks.

The BHR harnesses help and they are $125, shipped, with little to no wait, a very clean install, and from the guys who invented the harness in the first place. Kudos to Chris from Esmeril for understanding and respecting this.

wait, so your harness fits the esmeril ignition kit?

Looking at the pictures in the link, yes. Also looking at other pictures I am confident that the BHR harness will end up having the best fitment in all other regards, as well, since Esmeril uses the same coil location spot BHR does; the factory coil location. BHR can also make harnesses and plug wires to fit the Esmeril kit as long as you need them to be. Need a 50-foot set of harnesses and wires? No problem. The BHR harness also works with the supposedly-backordered MSD 8247 coils (although I have dozens of THOSE available too with more on the way right now so I don't know what that "backorder" story is all about).

Make sure to let Brice know, willya?

Need a 50-foot set of harnesses and wires? No problem. ?

nice, so i can have my ignition running in my friends car? gives a new meaning to the word double-teaming.

nice, so i can have my ignition running in my friends car? gives a new meaning to the word double-teaming.

:lol2:

I have this on my car, they seem to work fine.

No known issuses YET :squint:

SEARCH AJ! lol theres a few threads on this.

Looking at the pictures in the link, yes. Also looking at other pictures I am confident that the BHR harness will end up having the best fitment in all other regards, as well, since Esmeril uses the same coil location spot BHR does; the factory coil location. BHR can also make harnesses and plug wires to fit the Esmeril kit as long as you need them to be. Need a 50-foot set of harnesses and wires? No problem. The BHR harness also works with the supposedly-backordered MSD 8247 coils (although I have dozens of THOSE available too with more on the way right now so I don't know what that "backorder" story is all about).

Make sure to let Brice know, willya?

Yes Ray is right. It will fit. I installed mine over the weekend and it fits nicely. Make the engine bay look clean and simple.

SEARCH AJ! lol theres a few threads on this.
Damn mah bad! I admit I got lazy this time and didn't really search. :banghead:I was just wondering what coils they were using to be specific, LS2, Bosch, MSD etc.

I was just curious, damn nail me to the cross DOM. :lol2: