Esmiril Racing Ignition Upgrade
Has anyone tried these coils? Just wondering since these are the same guys that are putting down 414 WHP on the turbo RX8. It's going for $395.00 ?!?! That's a pretty good price.
http://www.mazdaparts.com/ProductDet...000-1215730739 Just wondering if anyone has tried these out yet. |
looks like you have to cut the stock plugs off and solder thier ones on .
Interesting ..... |
Originally Posted by Brettus
(Post 2964069)
looks like you have to cut the stock plugs off and solder thier ones on .
Interesting ..... |
I think he is trying to say they are not plug and play..you need to cut and solder/crimp the OEM harness to fit them
|
Ah that would make more sense. Thanks.
|
The BHR harnesses help and they are $125, shipped, with little to no wait, a very clean install, and from the guys who invented the harness in the first place. Kudos to Chris from Esmeril for understanding and respecting this.
|
wait, so your harness fits the esmeril ignition kit?
|
Looking at the pictures in the link, yes. Also looking at other pictures I am confident that the BHR harness will end up having the best fitment in all other regards, as well, since Esmeril uses the same coil location spot BHR does; the factory coil location. BHR can also make harnesses and plug wires to fit the Esmeril kit as long as you need them to be. Need a 50-foot set of harnesses and wires? No problem. The BHR harness also works with the supposedly-backordered MSD 8247 coils (although I have dozens of THOSE available too with more on the way right now so I don't know what that "backorder" story is all about).
Make sure to let Brice know, willya? |
Originally Posted by Charles R. Hill
(Post 2964452)
Need a 50-foot set of harnesses and wires? No problem. ?
|
Originally Posted by kersh4w
(Post 2964462)
nice, so i can have my ignition running in my friends car? gives a new meaning to the word double-teaming.
|
I have this on my car, they seem to work fine.
|
No known issuses YET :squint:
|
SEARCH AJ! lol theres a few threads on this.
|
Originally Posted by Charles R. Hill
(Post 2964452)
Looking at the pictures in the link, yes. Also looking at other pictures I am confident that the BHR harness will end up having the best fitment in all other regards, as well, since Esmeril uses the same coil location spot BHR does; the factory coil location. BHR can also make harnesses and plug wires to fit the Esmeril kit as long as you need them to be. Need a 50-foot set of harnesses and wires? No problem. The BHR harness also works with the supposedly-backordered MSD 8247 coils (although I have dozens of THOSE available too with more on the way right now so I don't know what that "backorder" story is all about).
Make sure to let Brice know, willya? |
Originally Posted by DOMINION
(Post 2965381)
SEARCH AJ! lol theres a few threads on this.
I was just curious, damn nail me to the cross DOM. :lol2: |
All times are GMT -5. The time now is 01:05 AM. |
© 2024 MH Sub I, LLC dba Internet Brands