I had this on my 05. Improved feel and engagement.

Anyone knows if the part is the same for series I and II. I called a few places and it seems that series I may be different from series II in that respect.

Want to weld/reinforce the clutch pedal and put this on as preventative measure.

Thanks for you help.

 

Yes, it will work fine. But you can PM Ash8 for confirmation.

 

^ Are you speaking from experience? I will try pm'n ash8.

 

Well my buddy (houstonrx8er) has a 2010 tranny in his 04' and I don't recall him needing a new clutch line. I'm 99.9% sure the line is interchangeable. I also have a 2009 tranny sitting in my garage and i don't see how the line would be any different.

 

Speaking from experience, it's the same. I put https://www.rx8club.com/series-ii-diy-161/diy-clutch-brake-line-replacement-bleeding-231802/ in the diy forum but it's the same as S1. The only things that are different is the oil filter moved so that's no longer useful as a reference point.

I recommend putting a speed bleeder on the slave since there's limited room there. I didn't and it sucked.

 

Yes, it sucks bleeding it with the everything on the engine.

 

Thanks. Which line did you get?

 

YES, hydraulic flexible Clutch Line Hose is the same for ALL Series RX-8's and is actually the same Mazda Part Number for ALL NC MX-5/Miata's.

 

Got it and SS brake lines from thmotorsports.