Stainless Steel Clutch Line - Same as Series I?
I had this on my 05. Improved feel and engagement.
Anyone knows if the part is the same for series I and II. I called a few places and it seems that series I may be different from series II in that respect. Want to weld/reinforce the clutch pedal and put this on as preventative measure. Thanks for you help. |
Yes, it will work fine. But you can PM Ash8 for confirmation.
|
^ Are you speaking from experience? I will try pm'n ash8.
|
Originally Posted by Chris_Bangle
(Post 4266536)
^ Are you speaking from experience? I will try pm'n ash8.
Well my buddy (houstonrx8er) has a 2010 tranny in his 04' and I don't recall him needing a new clutch line. I'm 99.9% sure the line is interchangeable. I also have a 2009 tranny sitting in my garage and i don't see how the line would be any different. |
Speaking from experience, it's the same. I put https://www.rx8club.com/series-ii-diy-161/diy-clutch-brake-line-replacement-bleeding-231802/ in the diy forum but it's the same as S1. The only things that are different is the oil filter moved so that's no longer useful as a reference point.
I recommend putting a speed bleeder on the slave since there's limited room there. I didn't and it sucked. |
Yes, it sucks bleeding it with the everything on the engine.
|
Originally Posted by laurichj
(Post 4266610)
Speaking from experience, it's the same. I put https://www.rx8club.com/showthread.php?t=231802 in the diy forum but it's the same as S1. The only things that are different is the oil filter moved so that's no longer useful as a reference point.
I recommend putting a speed bleeder on the slave since there's limited room there. I didn't and it sucked. |
YES, hydraulic flexible Clutch Line Hose is the same for ALL Series RX-8's and is actually the same Mazda Part Number for ALL NC MX-5/Miata's.
|
Originally Posted by Chris_Bangle
(Post 4266865)
Thanks. Which line did you get?
|
All times are GMT -5. The time now is 09:17 PM. |
© 2024 MH Sub I, LLC dba Internet Brands