Break-in with 5psi

are you running race gas or e85?
seems a little lean to me... scary lean

Zoom zoom boom.

No lean. 93pump gas.

when you accelerate aggressively all mazda lean before touch the perfec mix. Mi car run 11.7.

how much boost are you planning to run?

[QUItOTE=yomomspimp06;4769829]how much boost are you planning to run?[/QUOTE]

Break-in 5psi.

Low boost 10
high It is not known yet. When touch 400hp.

Mine dives to where i want it to be ...pretty much instantly....

Same here.

qft

but need more details and better mix. It not yet installed the methanol kit.

Same mixture. Progressive pedal.

I hope spoolup is gunna be better than that once you wind up the boost ....

Attachment 2182045B95AF1A7.jpg.html]Attachment 218205[/URL]

Attachment 218206


Attachment 218207
Attachment 218208

Attachment 218209

Attachment 218210

Attachment 218211

Attachment 218212
Home made powder coating parts
Clean engine.

what gun are you using? As a home powder coater myself, I cringe at the orange peel I'm seeing in your black pieces. I still get them from time to time. Over all, good job though. Keep it up. How did you mask it off?

So I watched one of your videos... can't help but notice water coming out of the overflow hose :uhh:

EDIT - holy cow that car looks insane! How did you get the headlights to look like that? :eek:

Is it because his car's AFR hit 15.5 on liftoff? I don't get it. My car is stock and it hits 15 on liftoff too. And even when flooring it stays around 14.5. Doesn't drop down to say 11-12.

Just a noob tryin to learn :lol:

first started. Air in the line. But Is well. Thanks

Attachment 21820141-A1C5-9F4E159CCF4B.jpg.html]Attachment 218202[/Attachment 218203

All from ebay cheap gun.
Tutorial like this👇🏽👇🏽

I watched the video multiple times and it seems as if the boost rolled on and AFR was in the 13's. the 2nd video looks a lot better. car is still running and OP is enjoying so it's whatever. I'm just looking forward to more vids and boosted 8's

Wet sand paper 800, 1000, 1500 and 2000 inside and outside. Polish inside and out side. Urethane Clear coat inside and outside.

still needs improvement in the mix. Next month dyno run. More video.

Ur such a lurker. Post yer stuff up!! :)

I'll look through my phone to see if I have any pictures. :( broke my bigger oven around Dec. of last year so I haven't done much of anything since. Been too lazy to fix it. I mainly did ATV parts and such. whatever my friends brought to me to coat. Since I live in the country that means, 4wheeler and Razor parts lol

Attachment 218178991E9E58.jpg.html]Attachment 218179[/Attachment 218180
Comin soon water methanol.

Lindo papa!!

in process
Attachment 218175

Gracias. Poco a poco se puede!!!

Attachment 218161

Attachment 218162
Almost watermethanol kit. Turbo intake finished.
Just need to connect and control metanol kit with Haltech

Attachment 218160 powder coating pipe.

Attachment 217617

The feeling when Haltech ecu activite methanol at 10psi of boost It is pure fun, feel more power and different sound from the exhaust. Love that. Video on dyno comming soon

Greetings to all things were delayed. the turbo downpipe was modified. More separated from the engine coolant inlet. The temperature was a bit high. Was changed to aluminum radiator 2 lines. Now haltech Re Ecu control my two fans with direct 12 volt (More fast). Fans turn on at 130 degree. With this change the temperature down six to seven degrees. But we are not satisfied with that. The climate of my country is almost all year at 100 degrees. High temperature in a turbo engine is dangerous. My coolant temperature: Daily drive a/c on temperature 190 with out a/c 185. With 12psi boost two or three agresive drive up to 205 degrees. But down fast to 196. At night is no problem remains at 185 to 192.Gradually we continue to seek alternatives to lower the temperature.
Any idea to down my temperature? I am thinking new hood With high performance coolant evans.

Are you still running that big ass inter cooler? More than likely you just need more flow to your radiator and with the grill, AC condenser, and inter cooler, not enough clean air is making to the radiator.

Look like same mesure greddy intercooler but 2" 1/2 inlet and outlet. I'm thinking about changing the horizontal position. Like that Attachment 217615

Have never seen a pic of your current IC setup , but if you have it blocking too much flow to the radiator it will cause it to overheat . I have a gap between IC and bottom tray of about 70mm which works great . I also run a second radiator where the RHS oil cooler would be .

I thought you had just moved this one up front.


https://cimg0.ibsrv.net/gimg/www.rx8...1a39bd12d3.jpg

Nice hermano!! Enjoy!!

Gracias.

V-mount radiator/IC aunque el espacio esta apretao! lol

Electric water pump like the ones used for FD RX-7, Evans works for me (FD)

Methanol jet nozzle and high temperature problems. We will continue improving until reaching the goal.

Getting there . Did the engine overheat ? What size nozzle are you running ?

Maradyne dual fan 12" cfm3,100 upgrade
 

Stock s2 fan vs dual maradyne fan 12".
Need better cable location. but fit perfect
Attachment 217231-B0B0-1AB7010F365D.jpg.html]Attachment 217232[/URL]
Attachment 217233
Attachment 217234

20 degrees less. Before 180f with stock fan s2 car without moving. Now 160f. Soon more video with moving car. Super happy with the result.
Attachment 217230

Once your build is completed im copying lol this is just fantastic cant wait to see more

So these fans just happen to be the right size?

Yes. 26" x 15". Fan 12".

12 degrees less, during the day. In Puerto Rico almost every day is 100 degrees. At night it stays with 15 degrees less.

At the event in Puerto Rico I had a talk with Rocky (Pac owner) about the Renesis engines and his Rx8 500 project. I showed my project and him suggested some changes. Rocky told me his mazda rx8 has 410rwhp. He say that the only way to have 400 rwhp safely is with good gasoline over 93 octane and 17% methanol. Gas is the most important thing.
I am fan rotary drag car 20b and 13b engine.
Salinas Puerto Rico speed way 2017
Attachment 217223
Attachment 217224
Orlando Speedworld october 2017
Attachment 217225

Some changes in my car are:
1.two 1700cc larger injector
2. external gas regulator
3. better methanol jet 17%
4. Control the temperature to 180 degrees.
5. Pipe change.

Mine runs around that 400whp mark currently and I couldn't agree more ... I run 30%Ethanol and I think it's a great fuel . Good mileage , great octane , great cooling properties and 100% reliable (as long as I can get E85 to make it up with) . A better option than injecting meth IMO.

I would add that 400 is about the limit of the Renesis exhaust ports no matter what octane fuel you run ...go much higher and you will become well known to your engine builder .

Agree, you have external fuel regulator?? Or stock?

My car has 360rwhp with problem in old dyno. I think in modern dyno I get 15 more same boost (15). But right now I use my car daily at 10psi.