Im looking to put 19x8.5 with 35mm offset rims with 235/35ZR19 tires... do you think these will rub?

 

You will need to roll the fenders and even that might not be enough. I would go for a +40-50 range for the offset, and if you get the +40 you will run SLIGHTLY under extremely hard cornering. Anything above +40 though and you should be fine.

 

Here's my 8 with 245/35/19 in the front and 275/30/19 in the rear. The rims are 19"x8.5 in the front and 19"x9.5 in the rear with 35mm offset

 

Here's my 8

 

These are the m-sports rims by ADR

 

that grill looks sweet

 

So do you get any rubbing of sidewalls against fender lip under hard cornering with this setup, or not?

Thx

 

It rubs a bit when you have 4 people on the back fender. I'm going to a performance shop on Monday to roll the fender with a special tool. I'll let you guys know how it turns out.

 

Hey RX8on19s,

I put new aftermarket rims on my RX8, but the sensors kept leaking air, so I couldn't use them. Did you have that problem?
If so, what did you do and is there an adapter available for them tha you know of?

Shepepp

 

I don't use the sansor, I live with the light in the car.....

 

please find out what special tool they use to roll fenders?

Hopefully not a baseball bat

 

http://www.robsaudiworld.com/fender.htm

This is the tool they use.