Wheels or Coilovers
#1
Registered
Thread Starter
Join Date: May 2010
Location: Bay Area, CA
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
Wheels or Coilovers
Hello all, need help on deciding what to buy next. My car is lowered on S-Tech springs with stock struts, I plan and want to buy NT03 first but will I have rubbing issues? I want to run 18x9.5 all around with +27 offset. I will be rolling my fenders but I dont want to pull. I like the stance and drop that the S-Techs give me and I might just buy KONI struts instead. What do you guys think?
#7
Registered RX8 Nut
iTrader: (11)
Whats more important to you, comfort, looks, or track performance?
What is your coilover budget? What brand are you think about getting?
Your current drop is 1.4/.7 with 207/145 spring rates. Even looking drop but not good for track performance. too low in the front and too soft.
What is your coilover budget? What brand are you think about getting?
Your current drop is 1.4/.7 with 207/145 spring rates. Even looking drop but not good for track performance. too low in the front and too soft.
Last edited by Highway8; 03-30-2011 at 06:45 PM.
#8
Registered
Thread Starter
Join Date: May 2010
Location: Bay Area, CA
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
Right now comfort and looks is important until money gets a little better then ill start working on getting ready for the occasional track days.
My budget for coils is around 1.000 more or less. And I was thinking about Stance or Tein's. If I went with S-Techs paired with KONI shocks, you think it will be too low in front for track?
My budget for coils is around 1.000 more or less. And I was thinking about Stance or Tein's. If I went with S-Techs paired with KONI shocks, you think it will be too low in front for track?
#9
Pew Pew Pew
iTrader: (10)
Pretty sure the people who are hard core about tracking don't lower more than 1/2" or so, and that isn't enough for the people who are more about the look. It's all a compromise. Konis + s-tech will be lower than just s-techs, but everyone I know with those springs wishes the rear was a little bit lower.
#14
mkuhnracing.com
iTrader: (3)
Right now comfort and looks is important until money gets a little better then ill start working on getting ready for the occasional track days.
My budget for coils is around 1.000 more or less. And I was thinking about Stance or Tein's. If I went with S-Techs paired with KONI shocks, you think it will be too low in front for track?
My budget for coils is around 1.000 more or less. And I was thinking about Stance or Tein's. If I went with S-Techs paired with KONI shocks, you think it will be too low in front for track?
Does your track have a big speed bump on the front straight?
#16
Registered
Thread Starter
Join Date: May 2010
Location: Bay Area, CA
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
I just asked if it was too low for track due to highway Saying my front may be too low? Coilovers are following shortly after the wheels so all I'm asking is will I have trouble rubbing for the meantime? Also will the stock lug nuts work with nt03?
#19
Registered
Thread Starter
Join Date: May 2010
Location: Bay Area, CA
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
budget of + or - 1000 for coilovers, this is on top of wheel purchase. I dont want to spend a lot on a set so im thinking stance which are 1300 I think? something like that. I just realized/forgot that I got some good tires mounted on my stocks, matters well wear those out first before some wheels. I just hate how bad of a job I did painting my stocks, id probably have to redo them for now.
@TopGear8 So S-Techs throw off the geometry? They were on the car when I bought it so I must be driving around with a really bad suspension geometry?
On a sidenote if I go with the route coilovers before wheels and use my stocks still would it be wise enough to throw some spacers on for a wider track as well as get rid of a lot of the tucking.
@TopGear8 So S-Techs throw off the geometry? They were on the car when I bought it so I must be driving around with a really bad suspension geometry?
On a sidenote if I go with the route coilovers before wheels and use my stocks still would it be wise enough to throw some spacers on for a wider track as well as get rid of a lot of the tucking.
#22
Registered RX8 Nut
iTrader: (11)
They should work fine.
For the wheels, hit up Rishie (endless rotaries) of autornd he mostly does wholesale but he is fairly local to you and hooks us rx8 guys up. I guarentee you he will get you the best price and he can answer any of your questions about wheels/tires.
For the wheels, hit up Rishie (endless rotaries) of autornd he mostly does wholesale but he is fairly local to you and hooks us rx8 guys up. I guarentee you he will get you the best price and he can answer any of your questions about wheels/tires.
#23
I HATE SPEEDBUMPS!
#24
I zoom therefore I am.
+1 for Rishie. he hooked me up with my PF01's, has an amazingly wide selection of lug nuts, gives some of the best prices i've found, and is just an all around nice guy.