wheel width/offset
#1
Registered User
Thread Starter
Join Date: Mar 2004
Location: Vancouver
Posts: 1,501
Likes: 0
Received 0 Likes
on
0 Posts
wheel width/offset
Our stock setup has 18x8 and an offset of 50 right?
Would a set of 18x7.5 wheels with a 43 offset fit on the 8s with no problems?
Thanks
Would a set of 18x7.5 wheels with a 43 offset fit on the 8s with no problems?
Thanks
#2
it all depends on the wheel design. as long as it clears the caliper, it should fit just fine. i'm not sure why you'd want a thinner wheel though. That smaller offset will not make the wheel "stick out" much farther than stock because the wheel is only 7.5" wide. make sure the bolt pattern will fit the 8 also. good luck.
#3
Registered User
Thread Starter
Join Date: Mar 2004
Location: Vancouver
Posts: 1,501
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Napboy
it all depends on the wheel design. as long as it clears the caliper, it should fit just fine. i'm not sure why you'd want a thinner wheel though. That smaller offset will not make the wheel "stick out" much farther than stock because the wheel is only 7.5" wide. make sure the bolt pattern will fit the 8 also. good luck.
reason is because im in love with these wheels :D
https://www.rx8club.com/showthread.p...d=1#post557386
Will these fit no problems?
Thread
Thread Starter
Forum
Replies
Last Post
hufflepuff
Series I Wheels, Tires, Brakes & Suspension
6
05-30-2016 10:45 AM
duworm
Series I Wheels, Tires, Brakes & Suspension
1
10-01-2015 04:57 PM
GranTouTou
Series I Wheels, Tires, Brakes & Suspension
0
09-30-2015 06:11 AM