djmano

had a chance to do my tein basic coilover install last week. actually had some time to snap pictures......the 1st time i messed with my suspension it took me about 8 hours to install lowering springs properly b/c i reversed the front and rear springs.

pic of the drivers side rear susp......right in the middle is the headlight leveler thingy which you have to remove to undo the lower control arm.



rear susp with lower control arms undone........ready for the old shocks and springs to come out!



top hats u must undo, before new suspension you will feel (sorry random yoda crack)



if you are doing a one man job.........use a scissor jack to guide the coilover up into the thread holes. simply slip the bottom of the coilover onto the brake hub then jack up the brake rotor to hoist it up.



now enjoy a cold beverage of your choice!

XDEEDUBBX

corona and limon?

djmano

its a lime. i paid $11 bucks for that beer they better hook it up with the right citrus injected fruit.

3rotor8

what a worthless post. 4 pics and directions that lead to no where. tell us how you installed your exhaust, and you can leave out the beer this time.

NgoRX8

iTrader: (1)

...? this thread shows his coilover install... nothing to do with exhaust
and this thread woulda died if you had not posted

swoope

iTrader: (5)

and your post priceless!!!

beers

EfiniRX8

this DIY install is lacking a lot of pictures it seems, but hey atleast you got time to take a beer shot

NgoRX8

iTrader: (1)

it ain't a DIY. it's just a fun pic.

djmano

it wasn't really a DIY there are already a few good write ups for that. i just wanted to post some shots of the teins on my car and some more pictures of the suspension so that anyone trying to install their own coilovers or springs could have something to reference.

this '3rotor8' guy seems to be specifically targeting my posts and thread comments and hasn't had anything helpful or interesting to say........isn't a ban in order yet?

thanks ngo. at least someone understands me around here.