Tanabe's springs are Here
#1
Boricua Hasta La Muerte
Thread Starter
Join Date: Oct 2003
Location: Jacksonville, FL
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Tanabe's springs are Here
Finally got my Tanabe's NF210 Springs, will be posting before and after pictures soon, so you guys can see the difference.
RX8Power
RX8Power
Last edited by rx8power; 02-08-2004 at 01:25 AM.
#3
Boricua Hasta La Muerte
Thread Starter
Join Date: Oct 2003
Location: Jacksonville, FL
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Well, after couple of hours installing the springs, can tell you I'm very disappointed with the way it looks. Tanabe claim the drop is 1.4 front and 1.2 rear. Well, mine drop .5 front and 1.5 rear. I triple check to make sure I didn't installed them erroneously, but by the markings on the springs they are installed the right way. Drove the car a while, but I still have the same ugly look. I mean, looks bad *** dropped like that in the rear, but I don't like the front vs rear drop. Will take pictures tomorrow to show you guys, but my plans are leave the front ones and install the factory ones back in the rear, that way I have a little less gap in the front.
Later
RX8Power
Later
RX8Power
#8
Boricua Hasta La Muerte
Thread Starter
Join Date: Oct 2003
Location: Jacksonville, FL
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Oh yeah, I'm gonna give it till saturday. That was too much of a pain in the *** to install them, and I'm not looking foward to f#!* with it anytime soon.
RX8Power
RX8Power
Thread
Thread Starter
Forum
Replies
Last Post
duworm
Series I Wheels, Tires, Brakes & Suspension
1
10-01-2015 04:57 PM
Turman-ator
Series I Wheels, Tires, Brakes & Suspension
11
09-22-2015 11:22 AM