Sway Bar End Link Question
06-19-2009, 03:54 PM
#1
Registered
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: New Jersey
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Sway Bar End Link Question
Hey guys,
I'm torn between getting a set of RB sway bars and RB end links or putting in some more and getting Mazdaspeed sways. First off, anybody have the Mazdaspeed sways and have opinions. But if I go with them, does anybody have suggestions on end links that aren't ridiculously priced. Can I use the RB end links with these. thanks
I'm torn between getting a set of RB sway bars and RB end links or putting in some more and getting Mazdaspeed sways. First off, anybody have the Mazdaspeed sways and have opinions. But if I go with them, does anybody have suggestions on end links that aren't ridiculously priced. Can I use the RB end links with these. thanks
06-19-2009, 03:59 PM
#2
RB endlinks are larger dia studs...so you have to drill the control arms and the bar....they work great but that is the downside
Mazdaspeed sways are OK..but they are much more expensive than a lot of the other bars
Look at the Progress Tech bars..they are adjustable and quite a good deal price wise. They might be a bit stiff.....but with lighter spring rates they work great on the street.....and great on the track with heavier springrates
Mazdaspeed sways are OK..but they are much more expensive than a lot of the other bars
Look at the Progress Tech bars..they are adjustable and quite a good deal price wise. They might be a bit stiff.....but with lighter spring rates they work great on the street.....and great on the track with heavier springrates
06-19-2009, 04:10 PM
#3
http://www.good-win-racing.com/Mazda.../20R-1006.html [front & rear combo deal]
http://www.good-win-racing.com/mazda.../20R-1099.html [front endlinks]
Good price from good vendor and easy to drill out the existing mating arms; they even provide the drill bit.
http://www.good-win-racing.com/mazda.../20R-1099.html [front endlinks]
Good price from good vendor and easy to drill out the existing mating arms; they even provide the drill bit.
Last edited by Huey52; 06-19-2009 at 04:13 PM.
06-19-2009, 04:37 PM
#4
RB endlinks are larger dia studs...so you have to drill the control arms and the bar....they work great but that is the downside
Mazdaspeed sways are OK..but they are much more expensive than a lot of the other bars
Look at the Progress Tech bars..they are adjustable and quite a good deal price wise. They might be a bit stiff.....but with lighter spring rates they work great on the street.....and great on the track with heavier springrates
Mazdaspeed sways are OK..but they are much more expensive than a lot of the other bars
Look at the Progress Tech bars..they are adjustable and quite a good deal price wise. They might be a bit stiff.....but with lighter spring rates they work great on the street.....and great on the track with heavier springrates
We have the best pricing hands down on them and run combo specials better then Goodwin Racing.
Thread
Thread Starter
Forum
Replies
Last Post
{FS/WTT} 04 Black Rx-8 TRACK AUTOX TIMEATTACK
Billy Marcial
RX-8's For Sale/Wanted
5
03-01-2018 06:50 AM
Solidtrance
Series I Wheels, Tires, Brakes & Suspension
22
09-04-2015 12:47 PM
