Pictures of Racing Beat/RB Springs installed?
#1
Pictures of Racing Beat/RB Springs installed?
Hello,
I've done some searches, but not much comes up under "Racing Beat Springs". Does anyone have pictures of the .5" drop? I found plenty of H&R and Tein, but nothing of the RBs. I have done some research for springs on this forum using the search tool, and I think I like the RB setup for the slightly stiffer spring rate (but not too harsh), and slightly lowered drop, but I've yet to actually see it installed on a car.
If it makes any difference, if the drop looks good (don't want anything too low/slammed, but not to close to stock either), I plan on getting the RB springs with Koni shocks. That paired with the RB Front and Rear Sways, I assume should give me much less body roll, sharper turn in, and response. Comments on this setup? The car is mainly a daily driver, and will be autocrossed for fun.
I thought I read somewhere that the Konis also drop the car by a little bit, along with whatever drop the springs give, is that correct?
Thanks in advance.
I've done some searches, but not much comes up under "Racing Beat Springs". Does anyone have pictures of the .5" drop? I found plenty of H&R and Tein, but nothing of the RBs. I have done some research for springs on this forum using the search tool, and I think I like the RB setup for the slightly stiffer spring rate (but not too harsh), and slightly lowered drop, but I've yet to actually see it installed on a car.
If it makes any difference, if the drop looks good (don't want anything too low/slammed, but not to close to stock either), I plan on getting the RB springs with Koni shocks. That paired with the RB Front and Rear Sways, I assume should give me much less body roll, sharper turn in, and response. Comments on this setup? The car is mainly a daily driver, and will be autocrossed for fun.
I thought I read somewhere that the Konis also drop the car by a little bit, along with whatever drop the springs give, is that correct?
Thanks in advance.
Last edited by Actaeon; 09-09-2007 at 03:05 PM.
#3
T-29 years and counting
iTrader: (3)
Join Date: Apr 2005
Location: North Fontana, CA.
Posts: 3,062
Likes: 0
Received 0 Likes
on
0 Posts
look under my name i have pictures. i have a thread some where in here i made for it as well. but check the gallery as well. i also just posted in the calling all velocity reds.
#5
Administrator
iTrader: (7)
this is your new favorite thread: https://www.rx8club.com/series-i-wheels-tires-brakes-suspension-55/spring-rates-other-basic-suspension-info-79096/
#8
Administrator
iTrader: (7)
I got more of a drop out of my car by installing subwoofers. Now with the S-Techs in the rear...
#10
Administrator
iTrader: (7)
ssshhhh, people will start to question why Xdeedubbx hasn't been posting lately.
I have NO idea where he is or what happened to him.
I have NO idea where he is or what happened to him.
#12
Administrator
iTrader: (7)
note to self: Google "Missoula, MT".
#14
Administrator
iTrader: (7)
Can I bring my friend "Mr. Benelli" ?
#16
I don't buy Kool-Aid
#17
Administrator
iTrader: (7)
yeah, it should have been MY car!!! J./K.
Actoen: any luck with the springs? Did you check out that link I posted?
Actoen: any luck with the springs? Did you check out that link I posted?
#18
I think I'll still go with the Racing Beat setup. I am fine with the stock ride height, so I don't need a huge drop.
I'm afraid with the car too low, I could scrape the front a bit more than I'd like.
Thank again, I appreciate it.
#19
Registered
Join Date: Feb 2006
Location: Conroe, Texas
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
The RB springs in combination with the Koni's and sway bars are a very nice set up. You'll be very happy. I have a neighbor back home who has this, along with some nice Enkei wheels and he is delighted with his car. Are you out there Razerback???
Thread
Thread Starter
Forum
Replies
Last Post
Pelleilee
New Member Forum
6
09-29-2019 10:07 AM
Solidtrance
Series I Wheels, Tires, Brakes & Suspension
22
09-04-2015 12:47 PM
yapakanichi
Series I Interior, Audio, and Electronics
8
08-17-2015 09:47 AM