lowest offset?
#1
Banned
Thread Starter
Join Date: Jan 2006
Location: from the SF BAY to LAS VEGAS
Posts: 1,250
Likes: 0
Received 0 Likes
on
0 Posts
lowest offset?
whats the lowest offset we can fit , can we pull off 18x8.5 33 offset in the front and a 18x9.5 35 offset in the rear?
Last edited by Mikeluvs8; 05-31-2006 at 04:05 AM.
#2
Rally Car Racer
Lower offset just means they'll "stick out" more. The rears aren't the problem.
OEM wheels are offset 50mm. A 33mm offset in the front wheel will move the outer edge of the wheel 17mm outward - plus an extra 1/4 inch for the wider wheel (8 to 8.5 means 1/4 inch wider on each side)
As a result the outer edge of the front wheel will be just shy of 1 inch (.92 inches) further to the outside than stock.
I would personally try to stay as close to 50 as I could going only as low as 45 just to be safe - but that's just me. I KNOW 18x9.5 with a 45 offset will fit all four corners perfectly.
http://www.good-win-racing.com/mazda.../21-1051b.html
OEM wheels are offset 50mm. A 33mm offset in the front wheel will move the outer edge of the wheel 17mm outward - plus an extra 1/4 inch for the wider wheel (8 to 8.5 means 1/4 inch wider on each side)
As a result the outer edge of the front wheel will be just shy of 1 inch (.92 inches) further to the outside than stock.
I would personally try to stay as close to 50 as I could going only as low as 45 just to be safe - but that's just me. I KNOW 18x9.5 with a 45 offset will fit all four corners perfectly.
http://www.good-win-racing.com/mazda.../21-1051b.html
#7
Originally Posted by NgoRX8
lol, i'd like a deep dish and a widebody too.
don't forget the beer
#11
Banned
Thread Starter
Join Date: Jan 2006
Location: from the SF BAY to LAS VEGAS
Posts: 1,250
Likes: 0
Received 0 Likes
on
0 Posts
lazi whats the specs on your advans? how bout 18x8.5 33 or 35 offset in the front, and 18x9.5 30 offset in the rear? would it look weird will it even fit?
Last edited by Mikeluvs8; 06-01-2006 at 03:46 PM.
#14
Boost needed
Join Date: Dec 2003
Location: San Jose, CA
Posts: 2,557
Likes: 0
Received 0 Likes
on
0 Posts
22 would stick out too much. Then again anything will fit with fender work and very aggressive camber. But you would go through tires like I go through shoes.
9.5 you want to do something like +40,42,45
9.5 you want to do something like +40,42,45
#15
drivelinestore.com
Join Date: Jun 2005
Location: OC
Posts: 2,756
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mikeluvs8
lazi whats the specs on your advans? how bout 18x8.5 33 or 35 offset in the front, and 18x9.5 30 offset in the rear? would it look weird will it even fit?
#22
Registered User
Join Date: Jan 2005
Location: Burnaby, BC
Posts: 821
Likes: 0
Received 0 Likes
on
0 Posts
i got 25 in the rears..on 9.5
you can go lower even..depending on the camber, tire profile and fender rollage..
id highly recommend it.. if you like an aggressive look
you can go lower even..depending on the camber, tire profile and fender rollage..
id highly recommend it.. if you like an aggressive look
Last edited by RX4life; 06-04-2006 at 05:04 AM.
#24
Banned
Thread Starter
Join Date: Jan 2006
Location: from the SF BAY to LAS VEGAS
Posts: 1,250
Likes: 0
Received 0 Likes
on
0 Posts
you can go lower even..depending on the camber, tire profile and fender rollage..